Search results for "light"
showing 10 items of 3575 documents
Exciton quenching by diffusion of 2,3,5,6-tetrafluoro-7,7’,8,8’-tetra cyano quino dimethane and its consequences on joule heating and lifetime of org…
2013
In this Letter, the effect of F(4)-TCNQ insertion at the anode/hole transport layer (HTL) interface was studied on joule heating and the lifetime of organic light-emitting diodes (OLEDs). Joule heating was found to reduce significantly (pixel temperature decrease by about 10 K at a current density of 40 mA/cm(2)) by this insertion. However, the lifetime was found to reduce significantly with a 1 nm thick F(4)-TCNQ layer, and it improved by increasing the thickness of this layer. Thermal diffusion of F(4)-TCNQ into HTL leads to F(4)-TCNQ ionization by charge transfer, and drift of these molecules into the emissive layer caused faster degradation of the OLEDs. This drift was found to reduce w…
Mesoscopic gels at low agarose concentration: perturbation effects of ethanol
1997
Aqueous agarose solutions at low concentrations (0.5 g/liter) were temperature quenched below the spinodal line to form mutually disconnected mesoscopic gels. In the presence of 6% ethanol, these solutions, obtained by quenching at the same temperature depth as in pure water, appear much more fluid, as determined by probe diffusion experiments. We show by static and dynamic light scattering that this can be explained by the solvent-mediated effects of ethanol, leading to a globular shape of mesoscopic agarose gels, rather than to an extended rodlike structure observed in pure water. Our findings show the significant effects of solvent perturbations on particle condensation and, therefore, m…
Modeling the interactions between light and crystallizing polymer during fast cooling
2004
In this work, an experimental set-up able to quench thin polymer films whilst recording the sample thermal history as well as the overall and depolarized light intensities of a laser beam emerging from the sample is described. The interactions between the light beam and the crystallizing material have been modeled accounting for absorption and scattering phenomena. The proposed model was found to be able to reproduce the ex- perimentally observed behavior of light intensities and it was validated by comparison with conventional DSC analysis. On the basis of this model, a method to obtain crystallinity evo- lution is proposed and applied to some fast cooling runs. The method was applied to q…
Microgel regions in dilute agarose solutions: the notion of non-gelling concentration, and the role of spinodal demixing
1991
Abstract Freely drifting microgel regions are found in aqueous solutions of agarose, a representative biostructural polysaccharide, at concentrations between 0.01% and 0.05% w/v when quenched from 100°C to lower temperature. The size of these domains depends on the quench temperature and agarose concentration. The results agree with recent findings on the role that fluctuations within or close to the instability region of solution have as the initial step towards the self-assembly of supramolecular structures, and throw a new light on the notion of the lowest solute concentration needed for gelation.
Kinetics of phase separation in polymer blends for deep quenches
1986
Electro microscopy was used to study the phase separation kinetics of a polystyrene/polyvinylmethylether system subjected to a critical deep quench. The size of the phase-separated domains was found to increase linearly with time, implying that hydrodynamic effects control the rate of growth of the domains in the time scale and temperature range under consideration. From these measurements the growth velocity and approximate diffusion constants can be determined for three different temperatures. Comparison of these results with those obtained by light scattering on other systems and with theoretical predictions is possible by replotting in dimensionless units.
Substrate impact on the thickness dependence of vibrational and optical properties of large area $MoS_2$ produced by gold-assisted exfoliation
2021
The gold-assisted exfoliation is a very effective method to produce large-area ($cm^2$-scale) membranes of molybdenum disulfide ($MoS_2$) for electronics. However, the strong $MoS_2/Au$ interaction, beneficial for the exfoliation process, has a strong impact on the vibrational and light emission properties of $MoS_2$. Here, we report an atomic force microscopy (AFM), micro-Raman ($\mu-R$) and micro-Photoluminescence ($\mu-PL$) investigation of $MoS_2$ with variable thickness exfoliated on Au and subsequently transferred on an $Al_2O_3/Si$ substrate. The $E_{2g}$ - $A_{1g}$ vibrational modes separation $\Delta\mu$ (typically used to estimate $MoS_2$ thickness) exhibits an anomalous large val…
Supramolecular hierarchy among halogen and hydrogen bond donors in light-induced surface patterning
2015
Halogen bonding, a noncovalent interaction possessing several unique features compared to the more familiar hydrogen bonding, is emerging as a powerful tool in functional materials design. Herein, we unambiguously show that one of these characteristic features, namely high directionality, renders halogen bonding the interaction of choice when developing azobenzene-containing supramolecular polymers for light-induced surface patterning. The study is conducted by using an extensive library of azobenzene molecules that differ only in terms of the bond-donor unit. We introduce a new tetrafluorophenol-containing azobenzene photoswitch capable of forming strong hydrogen bonds, and show that an io…
Radiation effects in nitride read-only memories
2010
Abstract We report on the influence of different types of radiation on the nitride read-only memories (NROM®). The memory cells were irradiated by light ions (Boron), X-rays and γ-rays. Memory transistor parameters, such as threshold voltage and subthreshold drain leakage were studied as a function of the accumulated radiation dose and compared to the as-programmed (-erased) devices parameters. Their time evolution was registered in the range from few hours up to 5 months after the irradiation. The NROM® cells showed good radiation robustness up to high accumulated doses. Sufficient program margin (difference of threshold voltage in the programmed state and the read-out voltage level) remai…
Numerical procedures and their practical application in PV modules analyses. Part I: air mass
2019
Abstract The subject of the article is aspects of PV modules and cells measurement, with the use of natural sunlight. A light source is an important element during calibration and measurements of solar cells and modules. All designers of artificial light sources try to recreate natural light using so called measurement tables. The correctly performed measurement, i.e. meeting all the appropriate atmospheric conditions, guarantees obtaining the result with the use of a reference spectrum. The article has two main aims. The first aim of the article is to answer the question asked earlier - if the sunlight spectrum registered in appropriate conditions is so good that it serves as the reference…
Investigation of a Ge nanoparticle film by means of electron stimulated photon emission spectroscopy
2014
Abstract Electron stimulated photon emission spectroscopy was used for the study of the electronic structure of Ge nanoparticles. A nanoparticle film was prepared by thermal deposition on a quartz substrate. Photon emission was stimulated by electron bombardment at energies of several hundred electron volts. Electron field emission from a W-tip was used at tip voltage U t = 100–600 eV. A spectrometer in combination with a liquid nitrogen cooled charge-coupled device (CCD) camera was used for light detection. Light emission spectra were measured in the energy range 1.18–4.2 eV. They are characterized by features at ∼1.6 and ∼3.1 eV. A comparison with light emission spectra obtained with ano…