Search results for "ligniini"
showing 10 items of 25 documents
Combustion Properties of Birch (Betula pendula) Black Liquors From Sulfur-Free Pulping
2016
Sulfur-free pulping has an environmental advantage over the traditional kraft process. This article describes the combustion properties of the black liquors produced from silver birch (Betula pendula) sawdust using three different cooking processes: two sulfur-free cooks (soda-anthraquinone and oxygen-alkali), and one reference kraft cook. It also considers the corresponding black liquors from an integrated forest biorefinery, in which a hot-water pretreatment of feedstock was performed prior to pulping. With the same cooking time, the total burning times for the sulfur-free black liquors were higher (15–55%) than those for the conventional kraft black liquors. However, no significant diffe…
Role of lignin and sodium carbonate on the swelling behavior of black liquor droplets during combustion
2018
AbstractA partial removal of lignin from black liquor (BL) by carbonation and lignin precipitation was studied. In lignin-lean BL droplets during combustion in a laboratory furnace at 800°C in stagnant air, the maximum swelling was decreased. This observation was interpreted as showing that the lignin content decrement is due mainly to removal of higher molar mass (HMM) lignin and that the Na2CO3content of the BL is increased. Stepwise precipitation experiments with industrial softwood and hardwood kraft BLs by carbonation (resulting in pH decrement from 13 to 9) indicated that a fraction of HMM lignin (MM >10 kDa) with a higher amount of carbohydrates precipitated more prominently and e…
Lignin Inter-Diffusion Underlying Improved Mechanical Performance of Hot-Pressed Paper Webs
2021
Broader use of bio-based fibres in packaging becomes possible when the mechanical properties of fibre materials exceed those of conventional paperboard. Hot-pressing provides an efficient method to improve both the wet and dry strength of lignin-containing paper webs. Here we study varied pressing conditions for webs formed with thermomechanical pulp (TMP). The results are compared against similar data for a wide range of other fibre types. In addition to standard strength and structural measurements, we characterise the induced structural changes with X-ray microtomography and scanning electron microscopy. The wet strength generally increases monotonously up to a very high pressing tempera…
Fast pyrolysis of hot-water-extracted and soda-AQ-delignified okra (Abelmoschus esculentus) and miscanthus (miscanthus x giganteus) stalks by Py-GC/MS
2018
Abstract The thermochemical behavior of various samples of okra ( Abelmoschus esculentus ) and miscanthus ( Miscanthus x giganteus ) stalks (initial, hot-water-extracted, and those from sulfur-free delignification) were studied by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). In all cases, major GC-amenable condensable products were measured semi-quantitatively and classified into several product groups. The formation of these product groups from different feedstock samples with varying mass portions of their structural constituents (carbohydrates and lignin) was investigated at 500 °C and 700 °C with a residence time of 5 s and 20 s. The main product groups were aliphatic comp…
Chemometric Study on Alkaline Pre-treatments of Wood Chips Prior to Pulping
2016
Alkaline pre-treatments were performed for the production of organics-containing effluents from silver/white birch (Betula pendula/pubescens) and Scots pine (Pinus sylvestris) chips prior to chemical pulping. Pre-treatment conditions were varied with respect to time (from 30 min to 120 min), temperature (130 °C and 150 °C), and alkali charge (1, 2, 3, 4, 6, and 8% of NaOH on oven-dried wood). The analytical data (total content, weight average molar mass, and molar mass distribution) on dissolved lignin were subjected to principal component analysis to examine the relationship between molar mass and molar mass distributions in lignin removed from different wood species under varying alkaline…
Chemical characterization of okra stalk (Abelmoschus esculentus) as potential raw material for biorefinery utilization
2018
In the present work, okra stalk (Abelmoschus esculentus) was chemically characterized to evaluate its appropriate exploitation as a biorefinery feedstock. The chemical composition of this renewable lignocellulosic material yielding maximum up to 120 tons per hectare was primarily determined by methods of wood chemical analysis. In terms of its main organic constituents, its dry matter contained 65.0% carbohydrates (cellulose, hemicelluloses and other polysaccharides), 20.5% lignin and 5.0% extractives. In addition, thermogravimetric analyses revealed that the content of proteins and inorganics was 6.6 and 3.3% of the dry matter, respectively. Among the inorganic elements determined by induc…
Organic material dissolved during oxygen-alkali pulping of hot-water-extracted spruce sawdust
2016
Untreated and hot-water-extracted (HWE) Norway spruce (Picea abies) sawdust was cooked using the sulfur-free oxygen-alkali (OA) method under the following conditions: temperature, 170 °C; liquor-to-wood ratio, 5:1 L/kg; and NaOH charge, 19% on the oven-dry sawdust. In comparison with earlier studies conducted with birch sawdust, the spruce cooking yield data, together with the amount of the pulp rejects (78% to 86% for reference pulps from the initial feedstock and 73% to 83% for pulps from the HWE feedstock), revealed that the pretreatment stage prior to spruce OA pulping caused different effects on pulping performance. The analyses of the three main compound groups (i.e., lignin, volatile…
Sulfur-free pulping of hot-water-extracted spruce sawdust
2016
Softwood (Picea abies) sawdust was hot-water-extracted with two multi-phase processes (160-180°C, 100-280 min, and liquor-to-wood ratio 5 l/kg) corresponding to P-factors of ~780 (yield 80.0%) and ~4580 (yield 72.4%). The pre-treated materials were then pulped with the soda-AQ cooking (170°C, NaOH charge 20%, AQ charge 0.1%, 30-150 min, and liquor-to-wood ratio 5 l/kg), resulting in a yield range of 36.1-61.4% (for reference cooks without pre-extraction 47.9-60.0%). It was observed that the pre-extraction under moderate conditions enhanced the dissolution especially of large-molar-mass lignin during cooking, and the total amount of the dissolved lignin was also higher than that removed from…
Refractory organic pollutants and toxicity in pulp and paper mill wastewaters
2015
This review describes medium and high molecular weight organic material found in wastewaters from pulp and paper industry. The aim is to review the versatile pollutants and the analysis methods for their determination. Among other pollutants, biocides, extractives, and lignin-derived compounds are major contributors to harmful effects, such as toxicity, of industrial wastewaters. Toxicity of wastewaters from pulp and paper mills is briefly evaluated including the methods for toxicity analyses. Traditionally, wastewater purification includes mechanical treatment followed by chemical and/or biological treatment processes. A variety of methods are available for the purification of industrial w…
Molecular Signatures of Biogeochemical Transformations in Dissolved Organic Matter from Ten World Rivers
2016
Rivers carry large amounts of dissolved organic matter (DOM) to the oceans thereby connecting terrestrial and marine element cycles. Photo-degradation in conjunction with microbial turnover is considered a major pathway by which terrigenous DOM is decomposed. To reveal globally relevant patterns behind this process, we performed photo-degradation experiments and year-long bio-assays on DOM from ten of the largest world rivers that collectively account for more than one-third of the fresh water discharge to the global ocean. We furthermore tested the hypothesis that the terrigenous component in deep-sea DOM may be far higher than biomarker studies suggest, because of the selective photochemi…