Search results for "linear"

The linear absorbances method adapted to systems with two interfering compounds

1993

The paper exposes the theoretical and experimental study performed with the purpose to extend the application of the Linear Absorbances Method to more complex systems, which present two spectral interferences. The curves of collinearity are developed and a theoretical study of them is carried out. The theoretical equations developed are experimentally tested and the influence of the variables involved in the Linear Absorbance Method is studied, too. It is concluded that the use of couples of collinear wavelengths of the interferents allows to obtain the concentration of a compound in the presence of two interfering substances.

On the variations of acoustic absorption peak with particle velocity in micro-perforated panels at high level of excitation.

2010

The acoustic behavior of micro-perforated panels (MPP) is studied theoretically and experimentally at high level of pressure excitation. A model based on Forcheimer's regime of flow velocity in the perforations is proposed. This model is valid at relatively high Reynolds numbers and low Mach numbers. The experimental method consists in measuring the acoustical pressure at three different positions in an impedance tube, the two measurement positions usually considered in an impedance tube and one measurement in the vicinity of the rear surface of the MPP. The impedance tube is equipped with a pressure driver instead of the usual loudspeaker and capable of delivering a high sound pressure lev…

Experimental investigation of holes interaction effect on the sound absorption coefficient of micro-perforated panels under high and medium sound lev…

2011

Abstract This paper experimentally investigates the holes interaction effect on the sound absorption coefficient of micro-perforated panels under high and medium sound levels. The theoretical formulations are based on a semi-empirical approach and the use of Fok’s function to model the acoustic surface impedance. For the high sound level regime, an empirical power law involving three coefficients is adapted. It is shown theoretically and experimentally that these coefficients can lead to optimized absorption performance and particularly, a formula relating the critical Reynolds number (Reynolds number value after which the absorption coefficient decreases with the increase of sound level) a…

Estimation of ADME Properties in Drug Discovery: Predicting Caco-2 Cell Permeability Using Atom-Based Stochastic and Non-stochastic Linear Indices

2007

The in vitro determination of the permeability through cultured Caco-2 cells is the most often-used in vitro model for drug absorption. In this report, we use the largest data set of measured P(Caco-2), consisting of 157 structurally diverse compounds. Linear discriminant analysis (LDA) was used to obtain quantitative models that discriminate higher absorption compounds from those with moderate-poorer absorption. The best LDA model has an accuracy of 90.58% and 84.21% for training and test set. The percentage of good correlation, in the virtual screening of 241 drugs with the reported values of the percentage of human intestinal absorption (HIA), was greater than 81%. In addition, multiple …

Light-induced transmission nonlinearities in gallium selenide

1999

The intensity of a He–Ne laser (633 nm, 5 mW) transmitted by different GaSe samples is observed to change in correlation with a Nd-yttrium–aluminum–garnet laser pulse (532 nm, 7.8 ns, 3 mJ) which excites them. Such time response has been attributed to a nonlinear optical effect, i.e., a decrease in the refractive index due to the exciton screening by the photogenerated carriers. A calculation of the absorption coefficient and refractive index at different carrier concentrations has led to a reconstruction of transmittance transients which fully agree with the experimental data at different incident intensities and temperatures. Chantal.Ferrer@uv.es ; Jaqueline.Bouvier@uv.es ; Miguel.Andres@…

External pressure and composition effects on the atomic and electronic structure of SnWO4

2015

The atomic and electronic structure of tin tungstates, α-SnWO4, α-Sn1.03W0.99O4 and β-SnWO4 ,w as studied by the W L3-edge X-ray absorption spectroscopy and first-principles linear combination of atomic orbital (LCAO) calculations based on the hybrid exchange-correlation density functional (DFT)/ Hartree–Fock (HF) scheme. It was found that the crystal structure of both α-phases is built up of strongly distorted WO6 octahedra, whereas that of β-SnWO4 is composed of nearly regular WO4 tetrahedra. In addition, there are distorted SnO6 octahedra in both α- and β-phases. The metal–oxygen octahedra distortion is explained by the second-order Jahn–Teller effect. The influence of pressure on the st…

2014

In this paper mathematical modeling of a vehicle crash test based on a single-mass is studied. The model under consideration consists of a single-mass coupled with a spring and/or a damper. The parameters for the spring and damper are obtained by analyzing the measured acceleration in the center of gravity of the vehicle during a crash. A model with a nonlinear spring and damper is also proposed and the parameters will be optimized with different damper and spring characteristics and optimization algorithms. The optimization algorithms used are interior-point and firefly algorithm. The objective of this paper is to compare different methods used to establish a simple model of a car crash an…

Present status and first results of the final focus beam line at the KEK Accelerator Test Facility

2011

ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF damping ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.

Information content of data and variables and types of weighting in least-squares regression methods

1990

Abstract Algorithms are given for evaluating the relative amount of useful information related to a particular parameter which is carried by individual data points and intervals of the variables. The algorithms provide an efficient means of using the information contained in a set of data. Applications to the optimization of weighting in regression methods are described. Several informational and combined informational-statistical types of weighting are studied as a means of improving the accuracy and precision of the parameters obtained by non-linear regression.

Multivariate standardisation for non-linear calibration range in the chemiluminescence determination of chromium.

2006

Multivariate standardisation is proposed for the successful chemiluminescence determination of chromium based on luminol-hydrogen peroxide reaction. In an extended concentration range, non-linear calibration model is needed. The studied instrumental situations were different detection cells, instruments, assemblies, time and their possible combinations. Chemiluminescence kinetic registers have been transferred using piecewise direct standardisation (PDS) method. The optimisation of transfer parameters has been carried out based on the prediction residual error criteria. Non-linear principal component regression (NL-PCR) and non-linear partial least square regression (NL-PLS) were chosen for…