Search results for "mechanical analysi"
showing 10 items of 96 documents
Novel epoxy formulations for high energy radiation curable composites
2005
Abstract It has been widely recognised that high energy radiation can be effectively applied to the cure of epoxy resins in applications as composite matrices or structural adhesives with improvements in product quality and/or reduction in production costs. In the presence of suitable initiators, polymerisation of epoxies occurs via cationic mechanism, thus restricting the choice of the resin system components to species which do not contain electron donor groups. The present investigation is aimed to identify suitable co-monomers to be formulated with an epoxy resin, resulting in different cure reaction kinetics and application properties of the cured resin. In particular, four different a…
Structural investigation of e-beam cured epoxy resins through solid state NMR
2012
Abstract In this paper the network structure of e-beam cured DGEBF based epoxy resins is investigated. Two epoxy systems, having different reactivity and cured in different process conditions, were analyzed through solid state NMR spectroscopy. The analysis shows that the more reactive system has higher cross-linking density and higher uniformity of network distribution. Similar information were obtained, in a previous work, on the same systems through dynamic mechanical thermal analysis. It is worth noting that unlike DMTA tests, which interfere with the molecular structure of the analyzed material, due to the heating during the analysis itself, more reliable information, without any artef…
Acyclovir Delivery Matrices Based on Poly(Ethylene Glycol)/Chitosan Semi-Interpenetrating Networks
2007
Abstract Chitosan matrix systems have been studied as potential vehicles for the prolonged release of acyclovir (ACV). The influence of chitosan concentration (from 0.83% to 1.67%) on viscoelastic properties of formulations with and without glyoxal was analyzed. For chitosan‐poly(ethylene glycol) 400 formulations loss modulus ( G ″) are greater than storage modulus ( G ′). This corresponds to the characteristic behavior of nonstructured systems. When glyoxal was added to the chitosan‐poly(ethylene glycol) 400 formulations, gelled matrix was obtained (i.e., G ′ is higher than G ″), except for the lowest chitosan concentration. ACV release rates for the both types of systems, with and without…
The Use of Waste Hazelnut Shells as a Reinforcement in the Development of Green Biocomposites.
2022
Biodegradable Mater-Bi (MB) composites reinforced with hazelnut shell (HS) powder were prepared in a co-rotating twin-screw extruder followed by compression molding and injection molding. The effects of reinforcement on the morphology, static and dynamic mechanical properties, and thermal and rheological properties of MB/HS biocomposites were studied. Rheological tests showed that the incorporation of HS significantly increased the viscosity of composites with non-Newtonian behavior at low frequencies. On the other hand, a scanning electron microscope (SEM) examination revealed poor interfacial adhesion between the matrix and the filler. The thermal property results indicated that HS could …
Structure-property relationships of polycarbonate diol-based polyurethanes as a function of soft segment content and molar mass
2014
Segmented thermoplastic polyurethanes (PUs) have been synthesized with polycarbonate diol as soft segment and 4,4′-diphenylmethane diisocyanate and butanediol as hard segment. Two different series employing two different soft-segment molar mass, 1000 and 2000 g/mol, and by changing the hard-segment content from 32 to 67% have been investigated with the aim to elucidate the effect of the different content variations on the properties. Morphological, thermal, and mechanical properties have been studied by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), wide angle X-ray diffraction, atomic force microscopy, tensile and…
An Explicit Model for the Thermal-Mechanical Analysis of Hot Metal Forming Processes
1995
Abstract In the paper the authors propose a new finite element code for the coupled thermal-mechanical analysis of hot metal forming processes. As regards the mechanical problem, an explicit algorithm based on the solution of the dynamic equilibrium equation and an explicit time integration scheme is used, while the heat transfer analysis is based on the solution of the thermal equilibrium equations; in order to put the thermal problem in an explicit linear form a three level scheme has been employed for the discretization of the time variable. The model is based on a staggered procedure, in which the mechanical and the thermal analysis are carried out with respect to different time horizon…
PMMA-titania nanocomposites: Properties and thermal degradation behavior
2012
Titania nanoparticles were prepared using a solegel method and calcination at 200 and 600 � C in order to obtain anatase and rutile phases, respectively. The obtained powders were used to prepare PMMAe titania nanocomposites by a melt compounding method. The effect of the crystalline phase and the amount of titania, in the range 1e5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of X-ray diffractometry (XRD), transmission electron microscopy (TEM), 13 C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy ( 13 C{ 1 H}CP-MAS NMR), including the measurement of proton spinelattice relaxation time in t…
Properties and structure of cyanate ester/polysulfone/organoclay nanocomposites
2006
In this paper, a cyanate ester (CE) matrix has been modified with polysulfone and an organic montmorillonite (Nanofil 919). The blend was thermally cured in presence of copper acetylcetonate and nonylphenol. The morphology of the cured materials was investigated by wide angle X-ray, scanning and transmission electron microscopy techniques. An intercalate structure of silicate platelets in the cyanate matrix has been obtained. Furthermore, results of thermogravimetric analysis (TGA) suggest that CE/PSF/Nanofil 919 nanocomposites have higher thermal stability than the neat resin, increasing the onset decomposition temperature. Flexural strength distributions of modified and neat cyanate matri…
Effect of Plasma Treatment on Mechanical and Thermal Properties of Marble Powder/Epoxy Composites
2016
The aim of this work was to study the effect of the plasma treatment on the behavior of composite structures reinforced with marble powder, obtained as processing waste in the “Custonaci” basin. Moreover, different filler amounts (i.e. 10%wt, 20%, 30% in weight) were investigated. For the mechanical characterization, tensile and flexural quasi-static tests, Charpy impact test, and dynamic mechanical thermal analysis (DMTA) were performed. For the thermal stability, thermogravimetric analysis was carried out. Finally, real density and fraction of voids were measured. It was observed that untreated marble powder, on one hand, increases tensile and flexural stiffness and improves thermal stabi…
Use of new hydroxytelechelic cis-1,4-polyisoprene (HTPI) in the synthesis of polyurethanes (PUs): Influence of isocyanate and chain extender naturean…
2006
AbstractNew segmented polyurethanes (thermoplastic-elastomers) based on previously described hydroxytelechelic cis-1,4-polyisoprene (HTPI), miscellaneous isocyanates and chain extenders at various equivalent ratios were prepared by the classical one-shot method. The influence of the nature of isocyanate and chain extender, as well as their equivalent ratios, on the mechanical and thermal materials behavior was investigated. Thus, a comparative assessment of material properties was performed. Microphase separation of hard and soft segments was observed by DMTA, DSC and AFM. Moreover, according to Thermogravimetric Analysis (TGA), linear relationships depending on the isocyanate and chain ext…