Search results for "medium"
showing 10 items of 3746 documents
Hydrolysis rates, methane production and nitrogen solubilisation of grey waste components during anaerobic degradation.
2005
Abstract Municipal grey waste (i.e. the remaining fraction in municipal waste management systems in which putrescibles (biowaste) and other recyclables (paper, metals, glass) are source-segregated) was manually sorted into six main fractions on the basis of composition and also separated by sieving (100 mm mesh size) into two fractions, oversized and undersized, respectively. In practice, in waste management plant the oversized fraction is (or will be) used to produce refuse-derived fuel and the undersized landfilled after biological stabilisation. The methane yields and nitrogen solubilisation of the grey waste and the different fractions (all studied samples were first milled to 5 mm part…
Previous fire occurrence, but not fire recurrence, modulates the effect of charcoal and ash on soil C and N dynamics in Pinus pinaster Aiton forests.
2021
Abstract Understanding the effects of fire history on soil processes is key to characterise their resistance and resilience under future fire events. Wildfires produce pyrogenic carbonaceous material (PCM) that is incorporated into the soil, playing a critical role in the global carbon (C) cycle, but its interactions with soil processes are poorly understood. We evaluated if the previous occurrence of wildfires modulates the dynamic of soil C and nitrogen (N) and microbial community by soil ester linked fatty acids, after a new simulated low-medium intensity fire. Soils with a different fire history (none, one, two or three fires) were heat-shocked and amended with charcoal and/or ash deriv…
Microstructural and associated chemical changes during the composting of a high temperature biochar: Mechanisms for nitrate, phosphate and other nutr…
2018
Recent studies have demonstrated the importance of the nutrient status of biochar and soils prior to its inclusion in particular agricultural systems. Pre-treatment of nutrient-reactive biochar, where nutrients are loaded into pores and onto surfaces, gives improved yield outcomes compared to untreated biochar. In this study we have used a wide selection of spectroscopic and microscopic techniques to investigate the mechanisms of nutrient retention in a high temperature wood biochar, which had negative effects on Chenopodium quinoa above ground biomass yield when applied to the system without prior nutrient loading, but positive effects when applied after composting. We have compared non-co…
Vertical Distribution and Speciation of Trace Metals in Weathering Flotation Residues of a Zinc/Lead Sulfide Mine
2007
Sulfide-bearing mine tailings are a serious environmental problem around the world. In this study, the vertical distribution and speciation of Zn and Pb in the fine-grained flotation residues of a former sulfide ore mine in Germany were investigated to assess the inorganic weathering processes that effect the environmental risk arising from this site. Total metal contents were determined by X-ray fluorescence spectroscopy (XRF). Mobilizable fractions of Zn, Pb, Fe, and Mn were quantified by sequential chemical extractions (SCE). Furthermore, the speciation of Zn was analyzed by Zn K-edge extended X-ray absorption fine structure spectroscopy (EXAFS) to identify the residual Zn species. The v…
Relating ions concentration variations to conductivity variations in a sequencing batch reactor operated for enhanced biological phosphorus removal
2006
In this paper a deterministic relationship between ionic conductivity and phosphorus concentration variations in an enhanced biological phosphorus removal (EBPR) process is established. Conductivity shows a strong correlation with phosphorus in both anaerobic and aerobic stages, increasing or decreasing when phosphorus is released or taken up, respectively. Since the end of these processes can be detected by examining the conductivity profile in a cycle, useful information on the EBPR performance and stability is available. This information can be used for adjusting the length of the anaerobic and aerobic stages. Therefore, online process control based on inexpensive and easy to maintain se…
Chlorinated phenolic compounds in coniferous needles. Effects of metal and paper industry and incineration
1997
Abstract Pine needles were analyzed for their contents of chlorinated phenolic compounds. Altogether about 30 samples from surroundings of a metal scrap plant, a pulp and paper mill, a hazardous waste incinerator and reference samples outside of the immediate influence of these were analyzed by GC/ECD and GC/MS. Most phenolic compounds in the needles were found to be bound to the plant material and were not extractable as such by organic solvents. The concentrations of some bound chlorinated phenolic compounds were on level of 1–300 ng/g in dried needle. For many compounds the concentrations were remarkably higher in the three years old needles compared to the concentrations in the one and …
Organic material dissolved during oxygen-alkali pulping of hot-water-extracted spruce sawdust
2016
Untreated and hot-water-extracted (HWE) Norway spruce (Picea abies) sawdust was cooked using the sulfur-free oxygen-alkali (OA) method under the following conditions: temperature, 170 °C; liquor-to-wood ratio, 5:1 L/kg; and NaOH charge, 19% on the oven-dry sawdust. In comparison with earlier studies conducted with birch sawdust, the spruce cooking yield data, together with the amount of the pulp rejects (78% to 86% for reference pulps from the initial feedstock and 73% to 83% for pulps from the HWE feedstock), revealed that the pretreatment stage prior to spruce OA pulping caused different effects on pulping performance. The analyses of the three main compound groups (i.e., lignin, volatile…
Remediation of Solutions Containing Oxyanions of Selenium by Ultrafiltration: Study of Rejection Performances with and without Chitosan Addition
2017
Among the various technical options for removing ionic contaminants from wastewaters, membrane processes and especially their coupling with polymer addition have been proven to provide worthwhile prospects for the removal of metal cations. Nevertheless, their use for the removal of anionic pollutants such as oxyanions has been little studied in the literature. In the present work, the rejection of oxyanions forms of Se(IV) and Se(VI) by tight ultrafiltration membranes was deeply investigated under various experimental conditions. This paper aims at understanding the mechanisms governing oxyanion rejection and determining the potential ways to improve performances. It is first shown that sel…
Comparison of thermal expansion of wood and epoxy adhesives
2002
Epoxy-based adhesives are used both in the consolidation of decayed timbers and for new structural joints. Investigating the compatibility of wood and epoxy adhesives provides a better knowledge of the long-term behaviour of wood-epoxy joints. Besides mechanical compatibility, also temperature-related parameters are relevant in this context. The values of the thermal expansion coefficients (TEC) of two wood species (Spruce, Picea abies and Iroko, Clorophora excelsa) and four different epoxy resins have been compared using a modified test method that allows for nearly iso-hygric conditions of the wood specimens. Minor differences in TEC have been observed between wood in the transversal-to-t…
New high-pressure phase of HfTiO4 and ZrTiO4 ceramics
2010
We studied the high-pressure effects on the crystalline structure of monoclinic HfTiO4 and ZrTiO4. We found that the compressibility of these ceramics is highly non-isotropic, being the b-axis the most compressible one. In addition, the a-axis is found to have a small and negative compressibility. At 2.7 GPa (10.7 GPa) we discovered the onset of an structural phase transition in HfTiO4 (ZrTiO4), coexisting the low- and high-pressure phases in a broad pressure range. The new high-pressure phase has a monoclinic structure which involves an increase in the Ti-O coordination and a collapse of the cell volume. The equation of state for the low-pressure phase is also determined.