Search results for "membrane bioreactor"
showing 10 items of 120 documents
Bacterial community structure and removal performances in IFAS-MBRs: A pilot plant case study
2017
Abstract The paper reports the results of an experimental campaign carried out on a University of Cape Town (UCT) integrated fixed-film activated sludge (IFAS) membrane bioreactor (MBR) pilot plant. The pilot plant was analysed in terms of chemical oxygen demand (COD) and nutrients removal, kinetic/stoichiometric parameters, membrane fouling and sludge dewaterability. Moreover, the cultivable bacterial community structure was also analysed. The pilot plant showed excellent COD removal efficiency throughout experiments, with average value higher than 98%, despite the slight variations of the influent wastewater. The achieved nitrification efficiency was close to 98% for most of the experimen…
Effect of a co-substrate supply in a MBR treating shipboard slop: Analysis of hydrocarbon removal, biomass activity and membrane fouling tendency
2018
The paper reports the main results of an experiment carried out on a membrane bioreactor (MBR) plant designed for the treatment of shipboard slops. With a view of a co-treatment process of the slop with other wastewaters, sodium acetate, as external co-substrate, was supplied (high dosage – Period 1, low dosage – Period 2) to evaluate its effects on hydrocarbons removal. The MBR pilot plant enabled approximately 99% of total petroleum hydrocarbon (TPH) removal during the entire experiment, confirming the robustness of the MBR technology for the treatment of slops. The chromatography/mass spectrometry analysis showed that the removal efficiency for each alkane was close to the value observed…
Modeling the anaerobic treatment of sulfate rich urban wastewater. Application to AnMBR technology
2020
[EN] Although anaerobic membrane bioreactors (AnMBR) are a core technology in the transition of urban wastewater (UWW) treatment towards a circular economy, the transition is being held back by a number of bottlenecks. The dissolved methane released from the effluent, the need to remove nutrients (ideally by recovery), or the energy lost by the competition between methanogenic and sulfate-reducing bacteria (SRB) for the biodegradable COD have been identified as the main issues to be addressed before AnMBR becomes widespread. Mathematical modeling of this technology can be used to obtain further insights into these bottlenecks plus other valuable information for design, simulation and contro…
Effect of biomass features on oxygen transfer in conventional activated sludge and membrane bioreactor systems
2019
Abstract The aim of the present study was to compare the oxygen transfer efficiency in a conventional activated sludge and a membrane bioreactor system. The oxygen transfer was evaluated by means of the oxygen transfer coefficient and α-factor calculation, under different total suspended solids concentration, extracellular polymeric substances, sludge apparent viscosity and size of the flocs. The oxygen transfer coefficient and α-factor showed an exponential decreasing trend with total suspended solid, with a stronger oxygen transfer coefficient dependence in the conventional activated sludge compared to the membrane bioreactor. It was noted that the oxygen transfer coefficient in the conve…
Bacterial Community Structure of an IFAS-MBRs Wastewater Treatment Plant
2017
TIn this work, the bacterial community putatively involved in BNR events of a UCT-MBMBR pilot plant was elucidated by both culture-dependent and metagenomics DNA analyses. The presence of bacterial isolates belonging to Bacillus (in the anoxic compartment) and to Acinetobacter, Stenotrophomonas, Rhodococcus, Escherichia and Aeromonas (in the aerobic compartment) is in agreement with the nitrification/denitrification processes observed in the plant. Moreover, the study of bacterial community structure by NGS revealed a microbial diversity suggesting a biochemical complexity which can be further explored and exploited to improve UCT-MBMBR plant performance.
Impact of anaerobic dynamic membrane bioreactor configuration on treatment and filterability performance
2017
Abstract Submerged and external anaerobic dynamic membrane bioreactors (AnDMBRs) have been compared in terms of removal efficiency, filtration characteristics and microbial community structure. High COD removal efficiencies were obtained with both submerged and external AnDMBRs. To obtain an effective dynamic membrane (DM) layer enabling high quality permeate, longer time was required in the external AnDMBR configuration compared to the submerged one. A difference in microbial community structure was identified using pyrosequencing analyses between the submerged and external AnDMBRs. The number of archaeal types decreased in the bulk sludge of the external AnDMBR. External sludge recirculat…
Kinetics of nitrogen removal in a MBR nutrient removal activated sludge system
2006
The application of membrane bioreactor (MBR) technology to biological nutrient removal (BNR) activated sludge (AS) systems is limited and uncertainty exists as to the impact of the conditions induced by the membranes on the biologically mediated processes of nutrient removal. Two main conditions associated with MBRs are (1) high total suspended solids (TSS) concentrations (8–20 g/L) and (2) different selection pressures due to biomass retention not being based on settleability, compared with conventional systems with secondary settling tanks (SSTs). Recently, Ramphao et al. [1] concluded that incorporating membranes in BNR AS makes a profound difference to the design of the system. Previous…
Microalgae cultivation in wastewater: nutrient removal from anaerobic membrane bioreactor effluent
2012
This study investigated the removal of nitrogen and phosphorus from the effluent of a submerged anaerobic membrane bioreactor (SAnMBR) by means of a lab-scale photobioreactor in which algae biomass was cultured in a semi-continuous mode for a period of 42 days. Solids retention time was 2 days and a stable pH value in the system was maintained by adding CO2. Nitrogen and phosphorus concentrations in the SAnMBR effluent fluctuated according to the operating performance of the bioreactor and the properties of its actual wastewater load. Despite these variations, the anaerobic effluent proved to be a suitable growth medium for microalgae (mean biomass productivity was 234 mgl(-1) d(-1)), achie…
Start-up with or without inoculum? Analysis of an SMBR pilot plant.
2010
This study analysed a submerged membrane bioreactor (SMBR) start-up with the purpose of determining the best conditions to carry it out. In order to do this, a hollow fibre membrane module was installed in a submerged configuration in a pilot aerobic reactor. The experiment was then divided in two phases, lasting 65 days each. During phase 1, the pilot plant was started-up without inoculum of activated sludge and no sludge, withdrawal was performed. Conversely, in phase 2, the MBR pilot plant was started-up with sludge inoculum and the sludge concentration was kept constant. In both phases, the volumetric loading rate applied to the pilot plant was kept constant. The authors analysed the di…
Nitrous oxide emission in a University of Cape Town membrane bioreactor: The effect of carbon to nitrogen ratio
2017
Abstract The effect of the carbon-to-nitrogen (C/N) ratio in the influent on the nitrous oxide (N 2 O) emission from a University of Cape Town Membrane BioReactor pilot plant was investigated. The membrane was located in a separate tank to single out the production of N 2 O due to the biological processes from N 2 O stripping as a result of the extra aeration needed for the mitigation of membrane fouling. The experimental campaign was divided into two phases, each characterized by a different C/N ratio (namely, 10 and 5 mgCOD/mgTN, Phase I and Phase II, respectively). The decrease of the C/N ratio promoted the increase of N 2 O emissions in both gaseous and dissolved phases, mainly due to a…