Search results for "mesoporous"
showing 10 items of 358 documents
Deep oxidation of pollutants using gold deposited on a high surface area cobalt oxide prepared by a nanocasting route.
2011
Gold deposited on a cobalt oxide with high surface area (138 m2 g−1), obtained through a nanocasting route using a siliceous KIT-6 mesoporous material as a hard template, has demonstrated high activity for the total oxidation of propane and toluene, and ambient temperature CO oxidation. The addition of gold promotes the activity when compared to a gold-free Co3O4 catalyst prepared using the same nanocasting technique. The enhanced catalytic activity when gold is present has been explained for the deep oxidation of propane and toluene in terms of the improved reducibility of cobalt oxide when gold is added, rather than to the intrinsic activity of metallic gold particles. The improved behavi…
Effect of the cerium loading on the HMS structure. Preparation, characterization and catalytic properties
2013
Abstract Ce–HMS mesoporous materials were prepared by incipient wetness method starting from HMS synthesized in acid condition. The effect of cerium quantity, in the range of Ce/Si atomic ratio 0.02–0.3, on its structure and properties was investigated. Results showed that the HMS hexagonal structure was maintained after the cerium adding. Furthermore, the surface area and the pore volume were reduced. The presence of the cerianite nanoparticles located within the HMS channels up to 0.05, thus covering the HMS surface at higher Ce/Si atomic ratio, was observed. The catalytic performances of the materials were tested in ethanol partial oxidation reaction.
Molybdenum–vanadium supported on mesoporous alumina catalysts for the oxidative dehydrogenation of ethane
2006
Abstract Vanadium and/or molybdenum oxides supported on mesoporous alumina have been prepared by a “wet” impregnation method, characterized (by using several physico-chemical techniques TPR, DR-UV–vis, Raman spectroscopies) and tested in the oxidative dehydrogenation (ODH) of ethane. For comparison Mo–V-mixed oxides supported on γ-Al2O3 have also been studied. The characterization results indicate that the main vanadium species in both Mo-free and Mo-containing V-based samples present low aggregation and coordination, whereas molybdenum is present as monomeric or polymeric tetrahedral molybdenum species. Interestingly, no apparent interaction between molybdenum and vanadia takes place. The …
Optical Optimization of the TiO2 Mesoporous Layer in Perovskite Solar Cells by the Addition of SiO2 Nanoparticles
2018
In this work, SiO2 nanoparticles (NPs) were integrated into the mesoporous TiO2 layer of a perovskite solar cell to investigate their effect on cell performance. Different concentrations of SiO2/ethanol have been combined in TiO2/ethanol to prepare pastes for the fabrication of the mesoporous layer with which perovskite solar cells have been fabricated. Addition of SiO2 NPs of 50 and 100 nm sizes produces an enhancement of cell performance mainly because of an improvement of the photocurrent. This increment is in good agreement with the theoretical predictions based on light scattering induced by dielectric SiO2 NPs. The samples using modified scaffolds with NPs also present a significant l…
Synthesis of self-assembled mesoporous 3D In2O3 hierarchical micro flowers composed of nanosheets and their electrochemical properties
2018
This report describes the methodology for the fabrication of mesoporous In2O3 microflowers by hydrothermal and calcination procedures in which In(OH)3/In2S3 acts as an intermediate. Both In2O3 and its precursor were analyzed with scanning electron microscopy, energy dispersive X-ray spectrophotometry, transmission electron microscopy and powder X-ray diffraction. BET surface area, pore size and pore volume analyses were also carried out. Electron microscopy images clearly evidence the self-assembly of 2D nanosheets into the micro flower structure. The mechanism of self-assembly and calcination is reported. Electrochemical properties of the synthesized In2O3 micro flowers were studied.
ChemInform Abstract: Covalently Supported Ionic Liquid Phases: An Advanced Class of Recyclable Catalytic Systems
2016
In this review, the most recent advances in the synthesis and catalytic applications of covalently supported ionic liquid (IL) phases will be discussed. This class of recyclable catalytic materials is based on the covalent attachment of several types of ammonium salts, usually imidazolium, but also thiazolium, triazolium, and pyrrolidinium salts, on the surface of different supports, for example, silica, periodic mesoporous organosilica, polystyrene, magnetic-based materials, carbon nanotubes (NTs), halloysite NTs, polyhedral oligomeric silsesquioxane (POSS), and fullerenes. Moreover, poly(ionic liquid) materials, in which the IL-based structure also acts as a support, will be considered. T…
Confined growth of carbon nanoforms in one-dimension by fusion of anthracene rings inside the pores of MCM-41
2014
We report a simple two-step procedure that uses anthracene, a cheap polyaromatic hydrocarbon with low melting point, as a molecular precursor to produce carbon nanoforms (CNFs). First, we describe the chemical synthesis of graphite from the fusion of anthracene rings at relatively low temperature (520 °C) followed by cyclodehydrogenation. Next, we extend this protocol to the synthesis of CNFs by confining the molecular precursor in a mesoporous host like MCM-41. The confined environment favors one-dimensional growth of CNFs with sizes controlled by the pores of the mesoporous host.
New heterogeneous catalysts for greener routes in the synthesis of fine chemicals
2007
Abstract New strong Lewis acid SnTf-MCM-41 and SnTf-UVM-7 catalysts with unimodal and bimodal pore systems were prepared in a two-step synthesis in which the triflic acid (Tf) was incorporated to previously synthesized mesoporous tin-containing silicas. The Sn incorporation inside the pore walls was carried out through the Atrane method. The SnTf-UVM-7 catalysts were prepared by aggregating nanometric mesoporous particles defining a hierarchic textural-type additional pore system. Following these procedures, catalysts with different Si/Sn ratios—21.8 to 50.8 for SnTf-MCM-41 and 18.4 for SnTf-UVM-7—were prepared. These new materials were tested in the acylation of aromatic sulfonamides using…
Atmospheric pressure plasma polymerisation of metalloporphyrins containing mesoporous membranes for gas sensing applications
2013
Abstract Metalloporphyrins are embedded in an organosilicon matrix by an easily up-scalable atmospheric pressure dielectric barrier discharge method. The integrity of the metalloporphyrins, followed by UV–visible spectroscopy, is successfully preserved and their aggregation prevented. The single molecule properties, rather than the bulk ones, are thus enhanced. Exposure to triethylamine, which reaches the metalloporphyrins through the pores of the organosilicon membrane, led to a shift in the absorption spectrum and confirms the gas sensing potential of such coatings.
Nanoscopic hybrid systems with a polarity-controlled gate-like scaffolding for the colorimetric signalling of long-chain carboxylates
2007
Hybrid mesoporous systems containing a gate-like ensemble functionalised with imidazolium groups and a dye are used for the selective colorimetric sensing of long-chain carboxylates. Amoros del Toro, Pedro Jose, Pedro.Amoros@uv.es