Search results for "metals"

showing 10 items of 2013 documents

Label-free wavelength and phase detection based SMS fiber immunosensors optimized with cladding etching

2018

The performance of E-SMS (Etched Singlemode-Multimode-Singlemode) optical fiber structures as immunosensors has been assessed by the implementation of antibody/antigen immunoassays. Through this procedure it has been proven that E-SMS structures are effective and suitable optical platforms for label-free biosensing. Using the phase shift and tracking the wavelength response it was found that the fabricated E-SMS devices exhibited limits of detection (LOD) down up to concentrations of 0.2mg/L of antigens in solution. This was achieved by coating the E-SMS with an antibody-based biolayer (goat IgG) that is able to determine the presence of anti-goat IgG antigen. Both a wavelength detection an…

Engineeringoptical fiber23010202 engineering and technologyFiber-optic biosensorsbiosensorlabel-free020210 optoelectronics & photonics0202 electrical engineering electronic engineering information engineeringMaterials Chemistry220905Electrical and Electronic EngineeringInstrumentationEtched-SMSIgG/Anti-IgG bindingLabel freebusiness.industryMetals and AlloysCondensed Matter PhysicsCladding (fiber optics)Surfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsLabel-free immunosensorsBio-layerChristian ministrybusinessTelecommunications
researchProduct

Biomonitoring of Atmospheric Aerosol with the use of Apis mellifera and Pleurozium schreberi

2019

Abstract The aim of the carried out research was to assess atmospheric aerosol pollution levels in the area of three apiaries located in the Opole Province and to analyse heavy metals pollution in bee honey and western honey bees. Pleurozium schreberi moss was used in analysing atmospheric aerosol pollution with the active biomonitoring method, whereas heavy metals levels were determined with flame atomic absorption spectrometry method (F-AAS). Relative Accumulation Factors (RAF) were used in determining increases of analytes concentrations in the moss samples. As a result of the carried out study, the following conclusions have been reached: mosses are good bioindicators of environment pol…

Environmental Engineering010504 meteorology & atmospheric sciencesEcologybiologyHeavy metals010501 environmental sciencesbiology.organism_classification01 natural sciencesEducationAerosolEnvironmental chemistryBiomonitoringEnvironmental ChemistryEnvironmental science0105 earth and related environmental sciencesPleurozium schreberiChemistry-Didactics-Ecology-Metrology
researchProduct

Rare earths and trace elements contents in leaves: A new indicator of the composition of atmospheric dust

2017

The relationship between the trace element distribution in atmospheric particles and leaves of some exposed plants in the environment was recently demonstrated. This indication would suggest that the trace element analysis of leaves in these plants could provide information about the composition, nature and origin of the atmospheric dust dispersed in the environment. In order to corroborate this hypothesis, the distribution of trace elements and Rare Earths were studied in leaves of some endemic plants, in the atmospheric fallout and in soils of rural, urban and industrial ecosystems in Sicily. These elements have been chosen to discriminate the source and nature of different source on atmo…

Environmental Engineering010504 meteorology & atmospheric sciencesHealth Toxicology and MutagenesisSettore AGR/13 - Chimica Agraria010501 environmental sciencesPlant Roots01 natural sciencesSoilREE La anomaly Leaves anthropogenic signature trace elementsEnvironmental ChemistryEcosystemSoil compositionSicily0105 earth and related environmental sciencesAtmosphereAnomaly (natural sciences)Public Health Environmental and Occupational HealthTrace elementDustGeneral MedicineGeneral ChemistryAtmospheric dustPollutionTrace ElementsSettore GEO/08 - Geochimica E VulcanologiaPlant LeavesTrace (semiology)Environmental chemistrySoil waterEnvironmental scienceMetals Rare EarthComposition (visual arts)Environmental MonitoringChemosphere
researchProduct

Using moss and lichens in biomonitoring of heavy-metal contamination of forest areas in southern and north-eastern Poland.

2017

Abstract In the years 2014–2016 biomonitoring studies were conducted in the forest areas of south and north-eastern Poland: the Karkonosze Mountains, the Beskidy Mountains, the Borecka Forest, the Knyszynska Forest and the Bialowieska Forest. This study used epigeic moss Pleurozium schreberi and epiphytic lichens Hypogymnia physodes. Samples were collected in spring, summer and autumn. Approximately 500 samples of moss and lichens were collected for the study. In the samples, Mn, Ni, Cu, Zn, Cd, Hg and Pb concentrations were determined. Based on the obtained results, the studied areas were ranked by extent of heavy-metal deposition: Beskidy > Karkonosze Mountains > forests of north-eastern …

Environmental Engineering010504 meteorology & atmospheric sciencesLichensGrowing seasonBryophyta010501 environmental sciencesForests01 natural sciencesmossMetals HeavyBiomonitoringEnvironmental Chemistryheavy metalsLichenWaste Management and Disposal0105 earth and related environmental sciencesAir Pollutantsbiologybiology.organism_classificationPollutionMossDeposition (aerosol physics)Environmental chemistrybiomonitoringEnvironmental scienceEpiphytePolandEpigealPleurozium schreberiEnvironmental MonitoringThe Science of the total environment
researchProduct

Algae - Heavy Metals Biosorbent / Glony - Biosorbent Metali Ciężkich

2013

Abstract The publication is a synthetic collection of information on the sorption properties of marine and freshwater algae. Kinetics and sorption equilibrium of heavy metals in algae-solution system, influence of abiotic factors on the process of sorption and desorption of analytes from biomass are discussed. In paper the results of laboratory tests conducted using different species and types of algae, which purpose was to assess their usefulness as natural sorbents, are described. The conclusions drawn from current research confirm the results from literature.

Environmental EngineeringAlgaebiologyChemistryEcology (disciplines)DesorptionEnvironmental chemistryEnvironmental ChemistryHeavy metalsbiology.organism_classificationEcological Chemistry and Engineering S
researchProduct

Impact of historical mining assessed in soils by kinetic extraction and lead isotopic ratios.

2014

12 pages; International audience; The aim of this study is to estimate the long-term behaviour of trace metals, in two soils differently impacted by past mining. Topsoils from two 1 km(2) zones in the forested Morvan massif (France) were sampled to assess the spatial distribution of Cd, Cu, Pb and Zn. The first zone had been contaminated by historical mining. As expected, it exhibits higher trace-metal levels and greater spatial heterogeneity than the second non-contaminated zone, supposed to represent the local background. One soil profile from each zone was investigated in detail to estimate metal behaviour, and hence, bioavailability. Kinetic extractions were performed using EDTA on thre…

Environmental EngineeringBioavailability[SDE.MCG]Environmental Sciences/Global Changes[ SDV.SA.SDS ] Life Sciences [q-bio]/Agricultural sciences/Soil study010501 environmental sciences[SDV.SA.SDS]Life Sciences [q-bio]/Agricultural sciences/Soil studySpatial distribution01 natural sciencesMiningSoilIsotopesTrace metals[SDU.STU.GC]Sciences of the Universe [physics]/Earth Sciences/GeochemistrySoil PollutantsEnvironmental ChemistrySpatial distributionWaste Management and Disposal0105 earth and related environmental sciencesHorizon (archaeology)010401 analytical chemistryExtraction (chemistry)Forest soilEDTABiota15. Life on land[ SDU.STU.GC ] Sciences of the Universe [physics]/Earth Sciences/GeochemistryPollutionSoil contamination0104 chemical sciencesSpatial heterogeneity[ SDE.MCG ] Environmental Sciences/Global ChangesKineticsLead13. Climate actionEnvironmental chemistrySoil waterSoil horizonEnvironmental scienceFranceEnvironmental Monitoring
researchProduct

Stabilisation of MSWI bottom ash with sulphide-rich anaerobic effluent.

2007

Effluent of an anaerobic sulphate-reducing wastewater treatment process was used to stabilise bottom ash. The effect of stabilisation on the concentration and binding of Ca, P, S, Cu, Pb, Zn, As, Cr, and Mo were studied by comparing results of sequential extraction from fresh and stabilised bottom ash. The stabilisation treatment improved the retention of Ca, Cu, Pb, S, and Zn in bottom ash compared to a treatment with ion-exchanged water. In addition to retention, Cu, S, and Zn were accumulated from the anaerobic effluent in the bottom ash. Concentrations of As, Cr, and Mo remained on the same level, whereas leaching of P increased compared to control treatment with ion-exchanged water. Im…

Environmental EngineeringChemistryHealth Toxicology and MutagenesisPublic Health Environmental and Occupational HealthEnvironmental engineeringGeneral MedicineGeneral ChemistrySulfidescomplex mixturesPollutionIncinerationWaste treatmentWastewaterBottom ashEnvironmental chemistryMetals HeavyEnvironmental ChemistryFeasibility StudiesSewage treatmentLeaching (metallurgy)AnaerobiosisSulfate-reducing bacteriaEffluentWater Pollutants ChemicalChemosphere
researchProduct

BIOALGA reactor: preliminary studies for heavy metals removal

2002

Abstract Microalgae have a high affinity for polyvalent metals, for that reason they could be used to reduce the concentration of heavy metals present in water and wastewater. In the present work an evaluation of a rotary biofilm reactor for algae immobilization (BIOALGA) with the subject of heavy metal removal was investigated. The BIOALGA reactor consisted of a pilot scale model that was operated with synthetic wastewater with an initial concentration of 3000 μg/l of cobalt ion. Scenedesmus obliquus was immobilized in the reactor, which was operated in batch mode for a period of 20 days. The rotary velocity used, 2 rpm, was constant during the experiment. A maximum removal of cobalt ion o…

Environmental EngineeringChromatographyPeriod (periodic table)ChemistryInorganic chemistryBiomedical EngineeringBioengineeringHeavy metalsMetalWastewaterScenedesmus obliquusvisual_artBatch processingvisual_art.visual_art_mediumCobalt ionsKinetic constantBiotechnologyBiochemical Engineering Journal
researchProduct

Sorption of heavy metals in the biomass of alga Palmaria palmata

2013

Sorption of heavy metals by the sea alga Palmaria palmata was investigated in laboratory conditions. The sorption process of the analytes was carried out with constant flow of the solutions through the algae samples. The Langmuir isotherm model was used to describe equilibria. The experiments confirmed that 50 min of exposure of algae with little heavy metal contamination in contaminated waters results in the increase of concentration of these analytes, proportional to their concentration in the tested waters. On the basis of the Langmuir isotherm direction factor, a = (c(a,max) × K)−1, affinity of heavy metals and algae increases in the following sequence: Mn2+ < Zn2+ ≈ Cd2+ &lt…

Environmental EngineeringChromatographybiologyChemistrySodiumAnalytical chemistrychemistry.chemical_elementLangmuir adsorption modelPortable water purificationSorptionHydrogen-Ion Concentrationbiology.organism_classificationWater PurificationIonsymbols.namesakeAdsorptionPalmaria palmataAlgaeMetals HeavyRhodophytasymbolsAdsorptionBiomassWater Pollutants ChemicalWater Science and TechnologyWater Science and Technology
researchProduct

Highlighting inconsistencies regarding metal biosorption.

2015

Thousands of articles have been devoted to examine different types of biosorbents and their use in cleaning polluted waters. An important objective of some studies has been the identification of the biosorption mechanisms. This type of investigation is not always performed, as it can only be done if scientists are aware of all mechanisms that, at least theoretically, control the removal of the target substances. Mistakes are often made, even in highly cited review articles, where biosorption mechanisms are named and/or grouped. The aim of this article is to highlight errors and inaccuracies as well as to discuss different classification systems of the biosorption mechanisms. This article se…

Environmental EngineeringComputer scienceHealth Toxicology and MutagenesisCommunicationBiosorption02 engineering and technology010501 environmental sciences021001 nanoscience & nanotechnology01 natural sciencesPollutionMetalsResearch DesignForensic engineeringEnvironmental ChemistryBiochemical engineeringAdsorption0210 nano-technologyWaste Management and DisposalWater Pollutants Chemical0105 earth and related environmental sciencesJournal of hazardous materials
researchProduct