Search results for "microscopi"
showing 10 items of 232 documents
Photoluminescence Imaging and LBIC Characterization of Defects in mc-Si Solar Cells
2018
Today’s photovoltaic market is dominated by multicrystalline silicon (mc-Si) based solar cells with around 70% of worldwide production. In order to improve the quality of the Si material, a proper characterization of the electrical activity in mc-Si solar cells is essential. A full-wafer characterization technique such as photoluminescence imaging (PLi) provides a fast inspection of the wafer defects, though at the expense of the spatial resolution. On the other hand, a study of the defects at a microscopic scale can be achieved through the light-beam induced current technique. The combination of these macroscopic and microscopic resolution techniques allows a detailed study of the electric…
Powder metallurgy processing and deformation characteristics of bulk multimodal nickel
2014
cited By 7; International audience; Spark plasma sintering was used to process bulk nickel samples from a blend of three powder types. The resulting multimodal microstructure was made of coarse (average size ∼ 135 μm) spherical microcrystalline entities (the core) surrounded by a fine-grained matrix (average grain size ∼ 1.5 μm) or a thick rim (the shell) distinguishable from the matrix. Tensile tests revealed yield strength of ∼ 470 MPa that was accompanied by limited ductility (∼ 2.8% plastic strain). Microstructure observation after testing showed debonding at interfaces between the matrix and the coarse entities, but in many instances, shallow dimples within the rim were observed indica…
Microscopic observation of unworn siloxane-hydrogel soft contact lenses by atomic force microscopy
2006
In the present study, samples of lotrafilcon A, balafilcon A, and galyfilcon A contact lenses were observed by atomic force microscopy (AFM) in tapping mode at areas ranging from 0.25 to 400 m2. Mean roughness (Ra), root-mean-square roughness (Rms) and maximum roughness (Rmax) in nanometers were obtained for the three lens materials at different magnifications. The three contact lenses showed significantly different surface topography. However, roughness values were dependent of the surface area to be analyzed. For a 1 m2 area, statistics revealed a significantly more irregular surface of balafilcon A (Ra = 6.44 nm; Rms = 8.30 nm; Rmax = 96.82 nm) compared with lotrafilcon A (Ra = 2.40 nm; …
Slow dynamics in ion-conducting sodium silicate melts: Simulation and mode-coupling theory
2005
A combination of molecular-dynamics (MD) computer simulation and mode-coupling theory (MCT) is used to elucidate the structure-dynamics relation in sodium-silicate melts (NSx) of varying sodium concentration. Using only the partial static structure factors from the MD as an input, MCT reproduces the large separation in relaxation time scales of the sodium and the silicon/oxygen components. This confirms the idea of sodium diffusion channels which are reflected by a prepeak in the static structure factors around 0.95 A^-1, and shows that it is possible to explain the fast sodium-ion dynamics peculiar to these mixtures using a microscopic theory.
Femtosecond digital lensless holographic microscopy to image biological samples
2013
The use of femtosecond laser radiation in digital lensless holographic microscopy (DLHM) to image biological samples is presented. A mode-locked Ti:Sa laser that emits ultrashort pulses of 12 fs intensity FWHM, with 800 nm mean wavelength, at 75 MHz repetition rate is used as a light source. For comparison purposes, the light from a light-emitting diode is also used. A section of the head of a drosophila melanogaster fly is studied with both light sources. The experimental results show very different effects of the pinhole size on the spatial resolution with DLHM. Unaware phenomena on the field of the DLHM are analyzed.
Quantifiable analysis of the failure of advanced carbon fibre composite structures leading to improved safety factors
2022
Abstract The increasing use of advanced composite materials means that they must now be considered as major materials for a wide variety of structures some of which will be in service for decades. There is therefore an important need to be able to quantify damage accumulation leading to failure in these materials particularly as they are often used in extreme situations for which failure must be avoided. This review shows how damage accumulation in many major composite structures is dominated by fibre failure but that the viscoelastic nature of the matrix induces time effects including delayed failure. It is shown that damage accumulation can be quantitatively modelled using a multi-scale a…
Mesoscopic structural organization in fluorinated pyrrolidinium-based room temperature ionic liquids
2019
Abstract In this contribution the microscopic and mesoscopic structural organization in a series of fluorinated room temperature ionic liquids, based on N-methyl-N-alkylpyrrolidinium cations and on bis(perfluoroalkylsulfonyl)imide anions, is investigated, using a synergy of experimental (X-ray and neutron scattering) and computational (Molecular Dynamics) techniques. The proposed ionic liquids are of high interest as electrolyte media for lithium battery applications. Together with information on their good ion transport properties in conjunction with low viscosity, we also describe the existence of nm-scale spatial organization induced by the segregation of fluorous moieties into domains. …
Mode-coupling theory of the glass transition for confined fluids
2012
We present a detailed derivation of a microscopic theory for the glass transition of a liquid enclosed between two parallel walls relying on a mode-coupling approximation. This geometry lacks translational invariance perpendicular to the walls, which implies that the density profile and the density-density correlation function depends explicitly on the distances to the walls. We discuss the residual symmetry properties in slab geometry and introduce a symmetry adapted complete set of two-point correlation functions. Since the currents naturally split into components parallel and perpendicular to the walls the mathematical structure of the theory differs from the established mode-coupling eq…
Trattamento endodontico di un incisivo centrale calcificato
2011
RiassuntoObiettiviDescrivere il trattamento endodontico di un incisivo centrale con due canali e caratterizzato da estese calcificazioni, mostrando come sia possibile affrontare e come possa essere complicato reperire un’anatomia complessa e senza riferimenti.Materiali e metodiTalvolta un radiogramma non è sufficiente a indirizzarci verso la soluzione di casi complessi, perché anche un’attenta analisi, in caso di estese calcificazioni, può essere insufficiente a interpretare correttamente l’anatomia canalare. È quindi indispensabile verificare clinicamente le condizioni dell’elemento dentale, se possibile avvalendosi di un microscopio che, grazie al forte fattore di ingrandimento, permette …
The kinetics of F-center aggregation under irradiation: many-particle effects in ionic solids
1994
The accumulation kinetics of primary Frenkel defects created in solids under permanent irradiation is calculated using the microscopic formalism of many-particle densities. It is based on the Kirkwood superposition approximation for three-particle densities as described in our previous paper p. N. Kuzovkov and E. A. Kotomin, Physica Scripta 47, 585 (1993)l. This formalism is generalized in this paper by incorporating the elastic attraction between similar defects (called in ionic solids F-centers) which causes their efficient aggregation. It is shown that the aggregation process starts only if the dose rate and elastic attraction energy exceed certain critical values; it also happpens in th…