Search results for "mixture"
showing 10 items of 1178 documents
VAPORIZATION CHARACTERISTICS OF ETHANOL AND 1-PROPANOL DROPLETS AT HIGH TEMPERATURES
2012
International audience; A detailed description of the vaporization of an isolated droplet has been carried out in this experimental study aimed at investigating ethanol and another aliphatic alcohol, 1-propanol. The characterization of the vaporization phenomenon is necessary for this liquid fuel to develop efficient design of injection systems for propulsion and power generation. Particularly, the vaporization rates and their dependency on temperature, important features for modeling and design, are explored for both ethanol and 1-propanol at intermediate to high temperatures. The experimental setup consists of a pressure chamber in which the furnace, the droplet formation, the droplet sup…
Preparation and characterization of continuous fly ash derived glass fibers with improved tensile strength
2018
Abstract The coal-based energy production in China generates more than 600 million tons of coal fly ash (CFA) each year, which drives us searching for new methods for recycling CFA. In this work, continuous glass fibers with a range of CFA (25–45%) were successfully prepared without showing any sign of fiber crystallization. The measured fiber tensile strength was found to increase with CFA proportionally. The fiber derived from 45% CFA exhibited the best tensile strength (higher than the E glass fiber prepared/tested under the same conditions) and good chemical stability (98% mass retention in the acid corrosion test). Our study shows a feasibility of making continuous CFA derived glass fi…
Investigations of the formation mechanism of nanostructured NbAl3 via MASHS reaction
2002
Abstract The nanostructured NbAl3 intermetallic compound was synthesized using the mechanically-activated self-propagating high-temperature synthesis (MASHS) technique. This process results from the combination of two steps: a short duration ball-milling of a pure elemental Nb+3Al powder mixture followed by a self-propagating high-temperature synthesis (SHS) reaction induced by the Nb+3Al reaction exothermicity. Synchrotron time-resolved XRD coupled with a 2D infrared camera were used to investigate the structural and thermal evolutions during the SHS reaction, and to study in situ the mechanism of NbAl3 formation. The influence of the incoming heat flux and the mechanical activation effect…
Mass absorption indices of various types of natural aerosol particles in the infrared
2010
The mass absorption index of aerosol particles has been measured in the 2-17-microm wavelength region. The measurements were performed on films of aerosol particles that were collected by an automatic jet impactor at polluted and various uncontaminated remote sites. All but marine aerosols possess strong absorption bands in the transparent part of the atmospheric long-wave spectrum, indicating marked influence of aerosol particles on the radiation budget of the atmosphere.
In-situ time resolved X-ray diffraction study of the formation of the nanocrystalline NbAl3 phase by mechanically activated self-propagating high-tem…
1999
The mechanically activated self-propagating high-temperature synthesis (MASHS) technique was used to produce a NbAl3 intermetallic compound. This process results from the combination of two steps: a mechanical activation of the Nb 3Al powder mixture which is followed by a self-propagating high-temperature synthesis (SHS) reaction, induced by the exothermal character of the reaction Nb3Al. An original experiment was designed to study in-situ the formation of the NbAl3 phase in the combustion front: time-resolved X-ray diffraction coupled with an infrared imaging technique and a thermocouple measurement were performed to monitor the structural and thermal evolution during the SHS reaction. Ow…
Morphology and Properties of Polyethylene/Clay Nanocomposite Drawn Fibers
2008
The influence of an elongational flow on the morphology of PE/clay nanocomposite drawn fibers was studied. An increase of the elastic modulus and the tensile strength as well as a decrease of the elongation at break are observed with increasing draw ratio. The applied elongational gradient orients the polymer chains and the clay particles along the spinning direction. When the applied flow results in the formation and the orientation of exfoliated nanoparticles, a pronounced increase of the mechanical properties is observed. The dispersed clay particles can be broken and oriented by the extensional flow, which might indicate a flow induced intercalated/exfoliated morphology transition.
Mechanical Activation as a New Method for SHS
2006
The use of mechanical activation (the elemental powder mixture is milled for a short time at given frequency and impact energy) as a precursor to self-propagating high-temperature synthesis (SHS) results in the formation of nanostructured porous materials. The mechanical activation step was found necessary (i) to modify the thermal parameters of the combustion front (i.e. combustion front velocity, thermal heating rate…) in the cases of Mo-Si, Fe-Al, Ni-Si (ii) to initiate a combustion front in the case of systems having a low exothermicity. Nevertheless, the control of the mechanically activated mixture characteristics and, the understanding of the mechanical activation role on the SHS par…
Optimization of Cell Growth on Bacterial Cellulose by Adsorption of Collagen and Poly-L-Lysine
2015
Poly-L-lysine and collagen were separately added to bacterial cellulose (BC) nanofibers. The ionic surface charge had been previously modified in order to promote the adsorption of poly-L-lysine and collagen. Cell adhesion of Chinese hamster ovary (CHO) cells on BC surfaces was confirmed by removing unattached cells from the BC substrates. Cell viability was calculated and it was determined that both poly-L-lysine-BC and collagen-BC substrates are viable for cell growth. The results showed that the cell viability in poly-L-lysine modified BC substrate is similar to the one observed in polystyrene tissue culture plates.
Study of methyl methacrylate polymerization in the presence of rubbers
2001
Grafting of poly(methylmethacrylate) onto various unsaturated rubbers is described. The grafting is achieved through thermally initiated methylmethacrylate in-situ polymerization. The main features of the polymerization process, i.e. conversion vs. time, grafting to rubber and gel percentage, have been investigated. The chemical structure of the rubber influences the process: rubber with pendant unsaturations gives rise to higher level of grafting.
Hydrogel films engineered in a mesoscopically ordered structure and responsive to ethanol vapors
2014
Abstract Responsive hydrogels filling the interstitial spaces of photonic crystals can form mesoscopically structured materials, which exhibit reversible shifts in the Bragg diffracted light as a response of environmental changes. These materials can be used to generate chemical or biochemical sensors. The present work reports on the synthesis and characterization of ethanol responsive hydrogels that can be used in the design of novel breathalyzers. The dynamic mechanical behavior of the macroscopic hydrogels and their swelling features in the presence of different liquids or vapors have been investigated to orientate the choice of the best responsive material and curing process. The swelli…