Search results for "nanorod"
showing 10 items of 190 documents
Electrochemical Synthesis of Zinc Oxide Nanostructures on Flexible Substrate and Application as an Electrochemical Immunoglobulin-G Immunosensor
2022
Immunoglobulin G (IgG), a type of antibody, represents approximately 75% of serum antibodies in humans, and is the most common type of antibody found in blood circulation. Consequently, the development of simple, fast and reliable systems for IgG detection, which can be achieved using electrochemical sandwich-type immunosensors, is of considerable interest. In this study we have developed an immunosensor for human (H)-IgG using an inexpensive and very simple fabrication method based on ZnO nanorods (NRs) obtained through the electrodeposition of ZnO. The ZnO NRs were treated by electrodepositing a layer of reduced graphene oxide (rGO) to ensure an easy immobilization of the antibodies. On I…
Surface modification of luminescent lanthanide phosphate nanorods with cationic "Quat-primer" polymers.
2011
"Quat-primer" polymers bearing cationic groups were investigated as a surface modifier for Tb-doped cerium phosphate green-emitting fluorescent nanorods (NRs). The NRs were synthesized by a microwave process without using any complex agents or ligands and were characterized with different analytical tools such as X-ray diffraction, transmission electron microscopy, and fluorescence spectroscopy. Poly(ethyleneimine) partially quarternized with glycidyltrimethylammonium chloride was synthesized separately and characterized in detail. (1)H and (13)C NMR spectroscopic studies revealed that the quaternary ammonium group was covalently attached to the polymer. UV-vis spectroscopy was used to exam…
From Layered Molybdic Acid to Lower-Dimensional Nanostructures by Intercalation of Amines under Ambient Conditions
2006
Nanostructures of varied dimensionality such as rods, scrolls, and disks of molybdenum oxide have been synthesized in gram quantities under ambient conditions using exfoliation of the layers as a synthetic tool. Intercalation of alkylamines (CnH2n+2NH2, where n = 3, 4, 8, 12, and 16) into yellow molybdic acid (MoO3·2H2O) and subsequent treatment with nitric acid resulted in molybdenum oxide nanorods, nanodisks, or oxide−amine composite nanorods. The sizes of the nanoparticles range from a few nanometers to micrometers in length and 10 to 200 nm in diameter. Detailed X-ray, scanning electron microscopy, and transmission electron microscopy analyses reveal an inverse relation between the size…
Light-Scattering and -Absorption of Nanoparticles
2012
To understand the optical response of nanoparticles to the incident light, a theoretical description is needed, which is given in this chapter. In a first approximation, these optical properties can be described using a quasi-static model, which assumes a particle-size much smaller than the wavelength of the light. The derivation of the polarizability of a sphere, which describes its optical properties, and further extensions for spheroidal, rod-shaped and coated particles are given in Sect. 2.2.
Increasing Nanoparticles’ Refractive Index Sensitivity
2012
Since the plasmon resonance of nanoparticles depends on the refractive index of the immediate environment, these particles form the basis of many sensing schemes . The sensitivity of plasmon sensors for the detection of changes in the environment varies greatly and depends on the particle material and its morphology (size and shape). To further increase this sensitivity by chemical modifications was another goal of my work.
Fabrication and characterisation of ZnO nanostructures: from nanoscale building blocks to hybrid nanomaterials - towards emerging technologies in sen…
2012
Metal oxide nanostructures characterized by multiple morphologies and structures are at the forefront of applications driven nanotechnology research. In particular, they represent a versatile solution for performance enhancement and applications in multifunctional devices and offer distinct advantages over their bulk counterparts. The current state in ZnO nanomaterials research and its impact in nanotechnology and modern engineering are discussed through the lens of con-tinuing technological advances in synthetic techniques allowing to obtain the material with predefined specific set of criteria including size, functionality, and uniqueness. Aim of this research activity is fabrication and …
Chemical Bath Deposition as a Simple Way to Grow Isolated and Coalesced ZnO Nanorods for Light-Emitting Diodes Fabrication
2018
A way to grow and characterize isolated and coalesced ZnO nanorods on $p$ -GaN/sapphire structure is presented. Chemical bath deposition can be used to grow ZnO nanorods of device-quality, simply controlling the duration time of the growth process and the concentration of the nutrient solution in the bath. Increasing the duration of the process, as well as the concentration of the solution, leads to compact and sound layers instead of separated nanorods. However, too high concentrations stop the growth process. Light-emitting diodes fabricated on these ZnO-p-GaN heterostructure have a peak of electroluminescence at 400 nm and exhibit interesting electrical and optical properties. Optical po…
Coalescence of ZnO nanorods grown by chemical bath deposition
2018
In this work, a way to grow isolated and coalesced ZnO nanorods on p-GaN/sapphire structure is presented. Chemical bath deposition [1],[2] was used to grow ZnO nanorods of device-quality on a p-GaN/n-GaN/sapphire template, simply controlling the duration time of the growth process and the concentration of the nutrient solution in the bath. Several p-GaN templates were soaked in a nutrient solution, prepared with different concentration of zinc nitrate hexahydrate (Sigma-Aldrich, reagent grade 98%) and hexamethylenetetramine (Alfa Aesar, ACS 99%) in deionized water, while being heated at a temperature of 80 °C for a period varying from 8 to 25 hours; then, the samples were left in the soluti…
SNOM signal near plasmonic nanostructures: an analogy with fluorescence decays channels
2008
International audience; Scanning Near-field Optical Microscope (SNOM) is based on local excitations of nanostructures deposited on a substrate (illumination mode). Ideally, the local source behaves like a dipolar emitter so that the SNOM signal is strongly similar to the fluorescence decay rates of an excited molecule that would be located at the SNOM tip position. We present here how the SNOM signal near plasmonic nanostructures can be used to analyze radiative and non-radiative contribution to the fluorescence decay rate.
Synergistic enhancement via plasmonic nanoplate-bacteria-nanorod supercrystals for highly efficient SERS sensing of food-borne bacteria
2017
Bio-sensing techniques utilizing metallic nanoparticles as a probe have gained more and more attention and play today an important role in the detection of bacteria. To date, although several sensing materials have been tested, there is still a long way to go to achieve a fast, low-cost, ultrasensitive and multifunctional substrate suitable for a universal biosensor for detection of bacterial cells. Here, we report a novel probe design based on anisotropic plasmonic nanoparticles organized to a biocompatible 3D bio-inorganic scaffold, i.e., nanoplate-bacteria-nanorod supercrystals (NBNS) with extremely high surface-enhanced Raman spectroscopic (SERS) activity as a model of synergistic plasm…