Search results for "optimization"
showing 10 items of 2824 documents
Linear parameter‐varying modelling and control of an offshore wind turbine with constrained information
2014
This study deals with linear parameter-varying modelling and output-feedback H ∞ control design for an offshore wind turbine. The controller is designed with consideration that not all the information in the feedback loop will be used. This constraint is incorporated into the design procedure. Constrained information means that a special zero-non-zero pattern is forced upon the gain matrix. The constrained controller is obtained based on parameter-dependent Lyapunov functions and formulated in terms of linear-matrix inequalities. Since the functions are dependent on the wind speed and accurate wind speed measurements are rarely available in practice, an extended Kalman filter is used to est…
Feasibility issues in static output-feedback controller design with application to structural vibration control
2014
Recent results in output-feedback controller design make possible an efficient computation of static output-feedback controllers by solving a single-step LMI optimization problem. This new design strategy is based on a simple transformation of variables, and it has been applied in the field of vibration control of large structures with positive results. There are, however, some feasibility problems that can compromise the effectiveness and applicability of the new approach. In this paper, we present some relevant properties of the variable transformations that allow devising an effective procedure to deal with these feasibility issues. The proposed procedure is applied in designing a static…
Vibration control for adjacent structures using local state information
2014
In this paper, a novel strategy for structural vibration control of multi-structure systems is presented. This strategy pays particular attention to mitigating negative interstructure interactions. Moreover, it is based on recent advances in static output–feedback control, which make possible the efficient computation of decentralized velocity-feedback controllers by solving a single-step optimization problem with Linear Matrix Inequality constraints. To illustrate the main ideas, a local velocity-feedback energy-to-peak controller is designed for the seismic protection of a two-building system. This controller is remarkably effective and extremely simple. Moreover, it can also be implement…
Passive-damping design for vibration control of large structures
2013
In this work, a systematic strategy to design passive damping systems for structural vibration control is presented. The proposed design methodology is based on the equivalence between decentralized static velocity-feedback controllers and passive damping systems. By using recent developments in static output-feedback control, the design of passivedamping systems can be formulated as a single optimization problem with Linear Matrix Inequality constraints. Moreover, this optimization problem can be efficiently solved with standard numerical tools, even for large dimension systems. Due to its computational effectiveness, the proposed methodology can be applied to the design of passive damping…
An execution, monitoring and replanning approach for optimal energy management in microgrids
2011
abstract This work develops a new approach for optimal energy management of electrical distribution ‘smart-grids’. Optimality aims at improving sustainability through the minimization of carbon emissions and atreducing production costs and maximizing quality. Input data are the forecasted loads and productionsfrom renewable generation units, output data are a set of control actions for the actuators. Theconsidered electrical distribution system includes storage units that must be considered over a 24 h timeinterval, to consider an entire charge and discharge cycle. The objectives for the optimal management ofdistributed (renewables and not) generation are technical, economical and environme…
Technical and Economical Analysis of Different Measures for Efficient Operation of a Distribution Network in a Mediterranean Island
2006
The paper performs a technical and economical comparison of different measures to improve the efficiency of a MV system for power distribution in the Mediterranean island of Lampedusa. The study takes into consideration three possible measures: 1) rated voltage increase from 10 kV to 20 kV; 2) reactive power compensation with fixed capacitor banks; 3) reactive power compensation with switchable capacitor banks. While the study of the first two considered measures is carried out with classical design methods, the optimal reactive design with switchable capacitor banks is carried out by means of a specific software set up at the DIEET and implementing the multiobjective optimization genetic a…
An Optimal Monitoring Program for Obtaining Voltage Sag System Indexes
2006
This paper presents a meter placement method for voltage sags monitoring in large transmission systems. An integer programming-based modeling is proposed for choosing the locations of power quality meters. A branch-and-bound-type algorithm is used to solve the optimization problem. A large transmission network is used to validate the method. Stochastic assessment of voltage sags is applied to the test network to obtain simulated monitoring results. Voltage sags system indexes are calculated from monitoring programs designed according to the optimization method. Comparisons with the system indexes obtained from a full monitoring program show the applicability of the method.
Friction Stir Welding Lap Joint Resistance Optimization Through Gradient Techniques
2007
In recent years, scientific interest on friction stir welding (FSW) has grown more and more since such a joining technique allows one to weld lightweight alloys that are rather difficult to weld or even “unweldable” with the classic fusion welding operations. Furthermore, few industrial applications of the process are already known in different manufacturing fields. In this paper, the optimization problem of a FSW lap joint for automotive applications is investigated, taking into account process parameters such as the tool rotating speed and the tool feed rate; a numerical gradient technique is applied for the optimization procedure reducing the number of experimental tests to be developed.
Application of the Morris method for screening the influential parameters of fuzzy controllers applied to wastewater treatment plants
2011
In this paper,we evaluate the application of a sensitivity analysis to help fine-tuning a fuzzy controller for a biological nitrogen and phosphorus removal (BNPR) plant. TheMorris Screeningmethod is proposed and evaluated as a prior step to obtain the parameter significance ranking. First, an iterative procedure has been performed in order to find out the proper repetition number of the elementary effects (r) of the method. The optimal repetition number found in this study (r = 60) is in direct contrast to previous applications of the Morris method, which usually use low repetition number, e.g. r = 10 ~ 20. Working with a non-proper repetition number (r) could lead to Type I error (identify…
A comprehensive tool for efficient design and operation of polygeneration-based energy μgrids serving a cluster of buildings. Part II: Analysis of th…
2013
Abstract The potential of polygeneration systems, in terms of profitability, energy saving and pollutant emissions reduction, highly depends on several factors such as plant efficiency, local normative and tariff conditions and reference technologies adopted to compare the results. In Part I of this paper a reliable tool was described, capable of optimizing the lay-out, design and operation of an integrated polygeneration system serving a cluster of buildings with their heat, cooling and power demand; the tool represents an excellent instrument to perform sensitivity analyses, thus enabling the analyst to formulate general design criteria and predict the effects of any change in the boundar…