Search results for "optoelectronic"
showing 10 items of 2328 documents
In-line fiber-optic sensors based on the excitation of surface plasma modes in metal-coated tapered fibers
2001
Abstract Metal-coated tapered fibers are reported as refractive index sensors based on the resonant excitation of surface plasma modes supported by the metal coating. The devices are easy to fabricate and constitute an alternative to metal-coated side-polished fibers and to other sensors made up of bulk components. We report the fabrication and power transmission properties of quasi-circular devices and asymmetric devices. Both sets of devices can be operated as wavelength output sensors, as well as amplitude output sensors. The transmittance of quasi-circular devices is polarization independent and it changes more than 30 dB as a function of external refractive index.
An Electrical Tuner to Command Optical NanoAntennas
2010
Optical antennas are passive device where fabrication designs decide operating frequency, gain and emission diagram. By introducing an electrically controllable load medium for the antenna, these characteristics can be externally controlled.
Optical Amplification in Hollow-Core Negative-Curvature Fibers Doped with Perovskite CsPbBr3 Nanocrystals
2019
| openaire: EC/H2020/820423/EU//S2QUIP We report a hollow-core negative-curvature fiber (HC-NCF) optical signal amplifier fabricated by the filling of the air microchannels of the fiber with all-inorganic CsPbBr3 perovskite nanocrystals (PNCs). The optimum fabrication conditions were found to enhance the optical gain, up to +3 dB in the best device. Experimental results were approximately reproduced by a gain assisted mechanism based on the nonlinear optical properties of the PNCs, indicating that signal regeneration can be achieved under low pump powers, much below the threshold of stimulated emission. The results can pave the road of new functionalities of the HC-NCF with PNCs, such as op…
CMOS-compatible nanoscale gas-sensor based on field effect
2009
The integration of a solid state gas sensor of the metal oxide sensor type into CMOS technology still is a challenge because of the high temperatures during metal oxide annealing and sensor operation that do not comply with silicon device stability. In the presence of an external electric field sensor sensitivity can be controlled through a change of the Fermi energy level and consequently it is possible to reduce the operation temperature. Based in this effect, a novel field effect gas sensor was developed resembling a reversed insulated : gate field effect transistor (IGFET) with the thickness of gas sensing layer in the range of the Debye length (L D ). Under these conditions the control…
All-fibered high-quality 1.5–2 THz femtosecond pulse sources
2009
Generation of high-quality ultra-high repetition rate optical pulse trains around 1.55µm has become increasingly interesting for many scientific applications such as optical sampling, ultra-high capacity transmission systems, component testing or nonlinear phenomena studies. Unfortunately, the current bandwidth limitations of optoelectronic devices do not enable the direct generation of pulses with repetition rate higher than 80GHz and a temporal width below a few ps.
Fiber-based device for the detection of low-intensity fluctuations of ultrashort pulses
2012
International audience; We describe a fiber-based device that can significantly enhance the low intensity fluctuations of an ultrashort pulse train to detect them more easily than with usual direct detection systems. Taking advantage of the Raman intrapulse effect that progressively shifts the central frequency of a femtosecond pulse propagating in an anomalous dispersion fiber, a subsequent spectral filtering can efficiently increase the level of fluctuations by more than one order of magnitude. We show that attention has to be paid to maintain the shape of the statistical distribution unaffected by the nonlinear process.
Coherent control in single plasmonic nanostructures
2015
Coherent control in plasmonic nanostructures is a door to space-time confinement of optical excitation and femtosecond super-resolution spectroscopy. Towards this goal, here we demonstrate femtosecond pulse-shaping of single gold nanostructure and local phase compensation.
Experimental generation of parabolic pulses via Raman amplification in optical fiber
2003
Parabolic pulse generation via Raman amplification is experimentally demonstrated in 5.3 km of non-zero dispersion shifted fiber presenting normal group velocity dispersion at the injected signal pulse wavelength of 1550 nm. The fiber is pumped by a commercially-available continuous wave source at 1455 nm, and the intensity and chirp of the amplifier output are characterized using frequency-resolved optical gating. For 2.4 pJ input pulses of 10 ps duration, the output pulse characteristics are studied as a function of amplifier gain over the range 11-24 dB, allowing the evolution of the input pulse to a parabolic pulse to be clearly seen for amplifier gains exceeding 15 dB. Numerical compre…
All-fibered high-quality low duty-cycle 20-GHz and 40-GHz picosecond pulse sources
2007
International audience; In this work, we demonstrate all-fibered 20-GHz and 40-GHz picosecond pulse sources with duty cycles as low as 1/14. The pulse train is achieved via the high-quality compression of an initial sinusoidal beating through four segments of optical fibers. General design rules are proposed and experimental results are in agreement with numerical predictions.
320GHz, 640GHz and 1THz femtosecond pulse sources based on multiple four wave mixing in highly non linear optical fibers
2006
Ultra-high repetition rate, transform-limited femtosecond pulse trains have been generated around 1555 nm at 320 GHz, 640 GHz and 1 THz through the compression of a dual frequency beat-signal in a highly nonlinear optical fiber.