Search results for "pac"

showing 10 items of 28794 documents

Space charge behavior of different insulating materials employed in AC and DC cable systems

2017

In this work, the space charge accumulation in three different XLPE based material has been carried out by using the PEA (Pulsed Electro-Acoustic) method. The specimens provided by a cables industry have been subjected to the same DC stress during polarization time at environment temperature. Afterwards, the high voltage generator has been turned off and the amount residual charge has been evaluated. The space charge profiles during polarization and depolarization have been carried out and compared. Finally, the distribution of electric field within the samples has been reported. In particular, the maximum distortion of electric field has been calculated by taking into account the distribut…

010302 applied physicsHvdcMaterials scienceCondensed matter physics020209 energyDepolarizationHigh voltage02 engineering and technologyDC stre01 natural sciencesSpace chargeSpace chargeElectronic Optical and Magnetic MaterialsSettore ING-IND/33 - Sistemi Elettrici Per L'EnergiaSettore ING-IND/31 - ElettrotecnicaPea methodElectric field0103 physical sciencesResidual charge0202 electrical engineering electronic engineering information engineeringAdditiveElectrical and Electronic EngineeringPolarization (electrochemistry)2017 International Symposium on Electrical Insulating Materials (ISEIM)
researchProduct

Space charge accumulation in undersea HVDC cables as function of heat exchange conditions at the boundaries – water-air interface

2020

Transmission lines with undersea HVDC cables are an interesting technological solution for the supply of electrical energy to islands. The accumulation of space charge inside the dielectric layer of a HVDC cable is one of the most important element to consider in its design and during operation. The formation of space charge is due to various factors including the high dependence on the temperature of the electrical conductivity of the insulation and the establishment of a thermal gradient under load conditions. This research is focused on the space charge accumulation phenomenon around a section of a HVDC cable half dipped in water and half in air. Due to the high difference in thermal con…

010302 applied physicsMaterials science020209 energyElectric potential energy02 engineering and technologyMechanicsThermal conduction01 natural sciencesSpace chargeHVDC cables space charge sustainable islandsSettore ING-IND/31 - ElettrotecnicaTemperature gradientThermal conductivityElectric power transmissionElectric field0103 physical sciencesHeat exchanger0202 electrical engineering electronic engineering information engineering2020 IEEE 20th Mediterranean Electrotechnical Conference ( MELECON)
researchProduct

Contributed Review: Review of thermal methods for space charge measurement.

2016

The space charge accumulation phenomenon has garnered great interest over the last two decades because of the increased use of direct current in high voltage electrical systems. In this context, a significant relevance has been achieved by the thermal methods, used for solid dielectrics. This paper presents a review of this non-destructive measurement system used for the measurement of space charge. The thermal pulse method, the thermal step method, and the laser intensity modulation method are described. For each configuration, the principle of operation, the thicknesses analyzed, and the spatial resolution are described, reporting also the main related applications

010302 applied physicsMaterials science020209 energySystem of measurementDirect currentContext (language use)High voltage02 engineering and technologySettore ING-IND/32 - Convertitori Macchine E Azionamenti Elettrici01 natural sciencesEngineering physicsSpace chargeSettore ING-IND/33 - Sistemi Elettrici Per L'EnergiaSettore ING-IND/31 - ElettrotecnicaModulation0103 physical sciencesThermal0202 electrical engineering electronic engineering information engineeringInstrumentationIntensity modulationthermal methods space charge measurementThe Review of scientific instruments
researchProduct

The α and γ plasma modes in plasma-enhanced atomic layer deposition with O2-N2 capacitive discharges

2017

Two distinguishable plasma modes in the O2–N2 radio frequency capacitively coupled plasma (CCP) used in remote plasma-enhanced atomic layer deposition (PEALD) were observed. Optical emission spectroscopy and spectra interpretation with rate coefficient analysis of the relevant processes were used to connect the detected modes to the α and γ modes of the CCP discharge. To investigate the effect of the plasma modes on the PEALD film growth, ZnO and TiO2 films were deposited using both modes and compared to the films deposited using direct plasma. The growth rate, thickness uniformity, elemental composition, and crystallinity of the films were found to correlate with the deposition mode. In re…

010302 applied physicsMaterials scienceAcoustics and UltrasonicsCapacitive sensingAnalytical chemistry02 engineering and technologyPlasma021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesSpectral lineSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsAtomic layer depositionCrystallinity0103 physical sciencesDeposition (phase transition)plasma modesCapacitively coupled plasmaRadio frequency0210 nano-technologyplasma-enhanced atomic layer deposition
researchProduct

High-pressure study of the infrared active modes in wurtzite and rocksalt ZnO

2011

International audience; We present a high-pressure study of ZnO carried out in the mid- to far-infrared frequency domain with the aim of characterizing the optic modes of wurtzite and rocksalt ZnO. We obtained the pressure coefficients of the E1(TO), E1(LO), A1(TO), and A1(LO) modes of the low-pressure wurtzite phase and compare them with previous Raman measurements. The optical modes of the high-pressure rocksalt phase are infrared active, so we were able to determine their wave numbers and pressure dependencies. In the wurtzite phase, high pressure induces a slight decrease in both longitudinal and transverse effective charges. The decrease is more pronounced in the rocksalt phase.

010302 applied physicsMaterials scienceCondensed matter physicsInfraredbusiness.industry02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesElectronic Optical and Magnetic MaterialsTransverse planesymbols.namesakeSemiconductorOpticsFrequency domainPhase (matter)[PHYS.COND.CM-GEN]Physics [physics]/Condensed Matter [cond-mat]/Other [cond-mat.other]0103 physical sciencessymbolsPACS : 78.30.Fs 64.70.kgWavenumber0210 nano-technologyRaman spectroscopybusinessWurtzite crystal structure
researchProduct

Space Charge Measurement under DC and DC Periodic Waveform

2018

In High Voltage systems, Partial Discharges (PDs) monitoring are one of the main diagnostic instrument to evaluate the reliability of the apparatus. Under Alternating Current (AC) stress, PDs detection and recognition techniques are well consolidated. On the contrary, the monitoring of PDs under Direct Current (DC) stress is difficult due to complexities related to the nature of the phenomenon, which cause the beginning of PDs events in proximity of the dielectric breakdown. This problem has been partially overcome by using a continuous Periodic waveform (DCP) with positive average value, as described in a recent published work. Under DC stress, another degradation factor is the Space Charg…

010302 applied physicsMaterials scienceDielectric strengthPEA methodElectronic Optical and Magnetic MaterialDirect currentHigh voltageDC stre01 natural sciencesSpace chargeSpace chargelaw.inventionComputational physicsStress (mechanics)Settore ING-IND/31 - ElettrotecnicaDCP strelawDCP waveform0103 physical sciencesWaveformElectrical and Electronic Engineering010306 general physicsAlternating currentVoltage
researchProduct

Molecular dynamics simulations of nanometric metallic multilayers: Reactivity of the Ni-Al system

2011

The reactivity of a layered Ni-Al-Ni system is studied by means of molecular dynamics simulations, using an embedded-atom method type potential. The system, made of an fcc-Al layer embedded in fcc-Ni, is initially thermalized at the fixed temperature of 600 K. The early interdiffusion of Ni and Al at interfaces is followed by the massive diffusion of Ni in the Al layer and by the spontaneous phase formation of $B2$-NiAl. The solid-state reaction is associated with a rapid system heating, which further enhances the diffusion processes. For longer times, the system may partly lose some its $B2$-NiAl microstructure in favor of the formation of $L{1}_{2}$-${\mathrm{Ni}}_{3}\mathrm{Al}$. This st…

010302 applied physicsMaterials scienceNanotechnology02 engineering and technologyType (model theory)021001 nanoscience & nanotechnologyCondensed Matter PhysicsMicrostructure01 natural sciencesElectronic Optical and Magnetic MaterialsMetalMolecular dynamicsChemical physicsvisual_artPhase (matter)0103 physical sciencesvisual_art.visual_art_medium[PHYS.COND.CM-MS]Physics [physics]/Condensed Matter [cond-mat]/Materials Science [cond-mat.mtrl-sci]Reactivity (chemistry)PACS: 64.70.Nd 02.70.Ns 68.35.bdDiffusion (business)0210 nano-technologyLayer (electronics)
researchProduct

Space Charges and Partial Discharges Simultaneous Measurements under DC Stress

2016

In the field of HVDC, the main causes of insulation aging are due to the space charge and PD phenomena. In particular, the purpose of the present work is to verify a possibility to measure simultaneously the space charge and the PDs under DC stress in order to evaluate the correlation between both phenomena. The space charge was measured by using a modified PEA cell and PDs were measured by using a novel wireless sensor system. The space charge profile and the PD pulses carried out simultaneously have been reported and discussed.

010302 applied physicsMaterials sciencebusiness.industry020209 energyElectrical engineering02 engineering and technologyMechanicsSpace (mathematics)01 natural sciencesspace charge partial discharges DC stress HVDCStress (mechanics)Settore ING-IND/31 - Elettrotecnica0103 physical sciences0202 electrical engineering electronic engineering information engineeringbusiness
researchProduct

Deformation of bubbles in silicon gel insulation under an alternating electric field

2019

The behavior of silicone gel under electrical stress plays a significant role in the reliability and durability of high voltage electronic power devices due to its widespread use for the insulation of IGBT modules and other components. The charges accumulation at the bubble boundaries leads to significant displacements due to the establishment of Coulombic forces and the high deformability of colloidal system. The main purpose of this work is to validate a numerical approach useful to investigate, for a given silicone gel, the non-linear relation between the applied HVDC stress and the electric field over an air bubble within the insulation bulk. The analysis has been carried out by means o…

010302 applied physicsMaterials scienceinsulationreliabilityDeformation (mechanics)020209 energyBubbleHigh voltage02 engineering and technologyDielectric01 natural sciencesSpace chargeIGBTSilicone gelStress (mechanics)chemistry.chemical_compoundpartial dischargeSettore ING-IND/31 - ElettrotecnicaSiliconechemistryElectric field0103 physical sciences0202 electrical engineering electronic engineering information engineeringComposite material
researchProduct

Study of the multipactor phenomenon using a full-wave integral equation technique

2017

Abstract Multipactor effect is a well-known phenomenon of RF breakdown in satellite payloads which degrades components, generates undesirable harmonics, contributes to power dissipation and increases noise in communications. Traditionally, multipactor has been investigated with the aim of obtaining the so-called multipactor threshold voltage, or to present different multipaction detection methods. However, very little attention has been focused on analysing this phenomenon using a multimodal approach. The main goal of this work is to analyse the interaction between a multipactor current and a realistic microwave cavity by means of a rigorous and accurate formulation. For the first time to t…

010302 applied physicsMultipactor effect020206 networking & telecommunications02 engineering and technologyDissipation01 natural sciencesNoise (electronics)Integral equationAdmittance parametersHarmonics0103 physical sciences0202 electrical engineering electronic engineering information engineeringElectronic engineeringElectrical and Electronic EngineeringRepresentation (mathematics)Microwave cavityMathematicsAEU - International Journal of Electronics and Communications
researchProduct