Search results for "packaging"
showing 10 items of 256 documents
Consumer perceptions of product packaging
2006
Purpose – This paper seeks to discuss the need to understand consumer perceptions in order to correctly design product packing and to achieve the desired position in the minds of consumers.Design/methodology/approach – Data collection was divided into two phases. The first, (based on designers' opinions), to determine the key graphic variables in the design of packaging. The second, (based on consumers' opinions), to associate each packaging with a positioning strategy. The seven product‐positioning strategies selected were represented from the consumers' standpoint using multidimensional scaling. Four maps were obtained related to: alternative packaging colours; alternative packaging typog…
Physical properties of green composites based on poly-lactic acid or Mater-Bi® filled with Posidonia Oceanica leaves
2018
Abstract This work focuses on the evaluation of Posidonia Oceanica leaves as effective reinforcing agent for ecofriendly, fully biodegradable polymer composites. Posidonia leaves were washed, ground and sieved in order to achieve two different size distributions and aspect ratios. They were then added to either a stiff or a ductile biodegradable polymer matrix, respectively poly-lactic acid (PLA) and MaterBi® (MB), at two different filler contents (10 wt% and 20 wt%). The materials were fully characterized from a spectroscopic, morphological, rheological, and mechanical point of view. In particular, the outcomes of tensile tests were statistically analyzed by using a Full Factorial Design i…
Biodegradable Polymers for the Production of Nets for Agricultural Product Packaging
2021
It is well known that the need for more environmentally friendly materials concerns, among other fields, the food packaging industry. This regards also, for instance, nets used for agricultural product (e.g., citrus fruits, potatoes) packaging. These nets are typically manufactured by film blowing technique, with subsequent slicing of the films and cold drawing of the obtained strips, made from traditional, non-biodegradable polymer systems. In this work, two biodegradable polymer systems were characterized from rheological, processability, and mechanical points of view, in order to evaluate their suitability to replace polyethylene-based polymer systems typically used for agricultural prod…
Modified arabinoxylan-based films. Part B. Grafting of omega-3 fatty acids by oxygen plasma and electron beam irradiation.
2003
Arabinoxylans (AXs) are byproducts of the cereal milling industry. To obtain high-value products, AXs have been used as a film-forming agent. Hence, AX-based films are poor water vapor barriers. The objectives of this study were to graft omega-3 (omega3) fatty acids onto AX polymeric chains by using two new technologies: cold plasma and electron beam (EB) irradiation. Results show that the surface hydrophobicity of the modified films is higher than that of a waxy coating or a low-density polyethylene (LDPE) film. In addition, FTIR spectroscopy analysis reveals vibration bands attributed to new chemical functions. Finally, a decrease in water vapor permeability (WVP) is obtained for the film…
Incorporation of nisin in poly (ethylene-co-vinyl acetate) films by melt processing: a study on the antimicrobial properties
2011
Both industry and academia have shown a growing interest in materials with antimicrobial properties suitable for food packaging applications. In this study, we prepared and characterized thin films of ethylene-co-vinyl acetate (EVA) copolymer with antimicrobial properties. The films were prepared with a film blowing process by incorporating a nisin preparation as an antimicrobial agent in the melt. Two grades of EVA containing 14 and 28% (wt/wt) vinyl acetate (EVA 14 and EVA 28, respectively) and two commercial formulations of nisin with different nominal activities were used. The effect of the nisin concentration also was evaluated. The films with the highest antimicrobial activity were th…
Effective antimicrobial materials based on low-density polyethylene (LDPE) with zinc oxide (ZnO) nanoparticles
2019
[EN] Effective antimicrobial polymeric nanocomposites were prepared with low density polyethylene (LDPE) and zinc oxide nanoparticles by melt compounding. These nanoparticles (~17 nm) obtained by the sol¿gel method, were used both as-synthesized and modified organically with oleic acid (Mod-ZnO). Young¿s modulus increased ~15 and 18% for LDPE/ZnO and LDPE/Mod-ZnO, respectively, compared to neat LDPE. When these composites were irradiated with white light, they showed an increase with nanoparticle incorporation, and the antimicrobial properties against E. coli were ~96¿99%. The release of the Zn cations was related to the antimicrobial properties. These nanocomposites are attractive for use …
Carboxymethylation of alkali extracted xylan for preparation of bio-based packaging films
2012
This study describes the synthesis of carboxymethylxylan (CMX) and investigates its suitability as a film for packaging applications. High-purity polymeric xylan was extracted from commercial bleached birch kraft pulp and converted to CMX with three different degrees of substitution (DSs). The water vapor sorption, mechanical, and barrier properties of the films prepared from CMX were tested. Increasing DS of CMX films resulted in an increase in elongation at break and a decrease in tensile strength and Young's modulus. The DS also affected the barrier properties of the films. CMX films with higher DS showed improved (reduced) oxygen permeability (OP), and the water vapor permeability (WVP)…
Polysaccharides/Halloysite nanotubes for smart bionanocomposite materials.
2020
Biopolymers as alternative to fossils-derived polymers are attracting the interest of researcher in material science. Besides the economic advantages, the sustainability makes polysaccharides ideal candidates to prepare films and formulations. The addition of Halloysite nanotubes as green inorganic fillers was exploited to improve the physico-chemical properties and to introduce smart response abilities to the material. Halloysite is a natural tubular nanomaterial with hollow cavity and large aspect ratio. The effect of polymer charge on the morphology and mesoscopic properties of polysaccharides/halloysite nanocomposites has been highlighted. Different strategies (solvent casting, lyophili…
Combining carvacrol and nisin in biodegradable films for antibacterial packaging applications
2021
Abstract In this work, the feasibility of antibacterial biopolymeric films containing carvacrol (CRV) and a nisin commercial formulation (Nis) for potential food packaging applications was investigated. As polymer matrix, a commercial biodegradable polymer formulation of Mater-Bi (MB) was chosen due to its significant food packaging applications. CRV and Nis were chosen due to their well-established antibacterial properties and their potential synergistic effect. MB/CRV, MB/Nis, and MB/CRV/Nis systems were produced by melt mixing and compression molding. The mechanical properties of the films were evaluated by tensile tests. Differential scanning calorimetry was assessed aiming at investiga…
Novel silver-based nanoclay as an antimicrobial in polylactic acid food packaging coatings.
2010
This paper presents a comprehensive performance study of polylactic acid (PLA) biocomposites, obtained by solvent casting, containing a novel silver-based antimicrobial layered silicate additive for use in active food packaging applications. The silver-based nanoclay showed strong antimicrobial activity against Gram-negative Salmonella spp. Despite the fact that no exfoliation of the silver-based nanoclay in PLA was observed, as suggested by transmission electron microscopy (TEM) and wide angle X-ray scattering (WAXS) experiments, the additive dispersed nicely throughout the PLA matrix to a nanoscale, yielding nanobiocomposites. The films were highly transparent with enhanced water barrier …