Search results for "paper industry"

showing 10 items of 413 documents

Thermophilic anaerobic digestion of pulp and paper mill primary sludge and co-digestion of primary and secondary sludge

2012

Anaerobic digestion of pulp and paper mill primary sludge and co-digestion of primary and secondary sludge were studied for the first time in semi-continuously fed continuously stirred tank reactors (CSTR) in thermophilic conditions. Additionally, in batch experiments, methane potentials of 210 and 230 m³CH₄/t volatile solids (VS)(added) were obtained for primary, and 50 and 100 m³CH₄/tVS(added) for secondary sludge at 35 °C and 55 °C, respectively. Anaerobic digestion of primary sludge was shown to be feasible with organic loading rates (OLR) of 1-1.4 kgVS/m³d and hydraulic retention times (HRT) of 16-32 d resulting in methane yields of 190-240 m³CH₄/tVS(fed). Also the highest tested OLR o…

PaperEnvironmental Engineeringta1172Industrial Wasteengineering.materialMethanechemistry.chemical_compoundHemicelluloseAnaerobiosisCelluloseWaste Management and DisposalKjeldahl methodta218Water Science and TechnologyCivil and Structural EngineeringSewageWaste managementbusiness.industryEcological ModelingPulp (paper)Paper millPulp and paper industryPollutionAnaerobic digestionchemistryWastewaterengineeringbusinessWater Research
researchProduct

Test procedures for obtaining representative extracts suitable for reliable in vitro toxicity assessment of paper and board intended for food contact.

2009

International audience; This paper describes the use of a suite of extraction procedures applicable to the assessment of the in vitro toxicity of paper/board samples intended for food-contact applications. The sample is extracted with ethanol, water, or exposed to modified polyphenylene oxide (Tenax) for fatty, non-fatty and dry food applications, respectively. The water extracts are directly suitable for safety assessment using in vitro bioassays. The ethanol extracts of the paper/board and of the exposed Tenax require pre-concentration to give acceptable sensitivity. This is because the in vitro bioassays can tolerate only a small percentage of added organic solvent before the solvent its…

PaperFood contact materialsHealth Toxicology and MutagenesisSample (material)[ SDV.TOX ] Life Sciences [q-bio]/ToxicologyTenax[SDV.TOX.TCA]Life Sciences [q-bio]/Toxicology/Toxicology and food chainIn Vitro TechniquesToxicologyPaper and boardMESH : Gas Chromatography-Mass Spectrometry01 natural sciencesMESH : Food PackagingGas Chromatography-Mass SpectrometryMESH : Toxicity Tests0404 agricultural biotechnologyToxicity TestsBioassayPaperboardMESH : WoodFood contactbusiness.industryTest procedures010401 analytical chemistryExtraction (chemistry)Food PackagingPublic Health Environmental and Occupational HealthLife Sciences04 agricultural and veterinary sciencesGeneral ChemistryGeneral MedicinePulp and paper industryToxicity assessmentWood040401 food science0104 chemical sciencesBiotechnologyMESH : PaperIn vitro testingExtraction proceduresFood contact materialsvisual_artvisual_art.visual_art_mediumEnvironmental sciencebusinessFood Science
researchProduct

Vertical distribution of AhR-activating compounds in sediments contaminated by modernized pulp and paper industry

2013

Increased ethoxyresorufin-O-deethylase (EROD) activity is a sensitive biomarker of exposure to the chemicals which activate the aryl hydrocarbon receptor (AhR) and induce the cytochrome P450 system, such as many polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs). Pulp bleaching was one of the main sources of PCDDs and PCDFs until elemental chlorine free (ECF) and total chlorine free bleaching processes since 1990s have remarkably decreased but not completely eliminate discharges of these chemicals. In addition, historically contaminated sediments may act as a source of these persistent contaminants. In this study, the contam…

PaperGeologic SedimentsEnvironmental EngineeringPolychlorinated Dibenzodioxinsta1172Elemental chlorine freeIndustrial Wastechemistry.chemical_compoundLimit of DetectionCytochrome P-450 CYP1A1AnimalsSoil PollutantsWaste Management and DisposalFinlandWater Science and TechnologyCivil and Structural EngineeringBenzofuransReteneGeographyEcological Modelingfood and beveragesPolychlorinated biphenylSedimentContaminationDibenzofurans PolychlorinatedPulp and paper industryPollutionPolychlorinated BiphenylsKraft processchemistryLiverReceptors Aryl HydrocarbonCesium RadioisotopesEnvironmental chemistryOncorhynchus mykissSewage treatmentPolychlorinated dibenzofuransWater Research
researchProduct

PDMS membranes for feasible recovery of dissolved methane from AnMBR effluents

2020

[EN] This study aimed to evaluate the feasibility of degassing membrane (DM) technology for recovering dissolved methane from AnMBR effluents. For that purpose, a PDMS membrane module was operated for treating the effluent from an AnMBR prototype-plant, which treated urban wastewater (UWW) at ambient temperature. Different transmembrane pressures and liquid flow rates were applied for evaluating methane recovery efficiency. Maximum methane recoveries were achieved when increasing the vacuum pressure and reducing the liquid flow rate, reaching a maximum methane recovery efficiency of around 80% at a transmembrane pressure (TMP) of 0.8 bars and a treatment flow rate (Q(L)) of 50 L h(-1). The …

Payback periodFiltration and Separation02 engineering and technology010402 general chemistry01 natural sciencesBiochemistryMethanechemistry.chemical_compoundGeneral Materials SciencePhysical and Theoretical ChemistryEffluentTECNOLOGIA DEL MEDIO AMBIENTEPDMS degassing MembraneTreated waterAnaerobic membrane bioreactor (AnMBR)Urban wastewaterMethane recovery021001 nanoscience & nanotechnologyPulp and paper industry0104 chemical sciencesVolumetric flow rateGreenhouse gas (GHG)MembranechemistryWastewaterGreenhouse gasEnvironmental science0210 nano-technology
researchProduct

Development of Peat Processing Methods for Production of Innovative Products

2020

Synthesis or humification of humic substances (HSs) is the second widely applied organic compound transformation process after photosynthesis. Peat decomposition process results in a production of a HSs which has a high demand in agriculture, forestry, and gardening areas. Addition of the KOH is good option for environmental protection and K+ belongs to the nitrogen, potassium and phosphorous (NKP) mineral component. A homogenization process in a customize for commerce, where peat treatment technology was improved with the help of the cavitation effect. This effect was provided with the help of the high-speed mixer-disperser (HSMD) developed at Riga Technical University. Mechanical cavitati…

PeatChemistry020209 energyMechanical EngineeringFulvic acid02 engineering and technology021001 nanoscience & nanotechnologyPulp and paper industryFluorescence spectraProcessing methodsMechanics of Materials0202 electrical engineering electronic engineering information engineeringProduction (economics)General Materials Science0210 nano-technologyKey Engineering Materials
researchProduct

Shedding light on biogas: Phototrophic biofilms in anaerobic digesters hold potential for improved biogas production

2019

Conventional anaerobic digesters intended for the production of biogas usually operate in complete darkness. Therefore, little is known about the effect of light on their microbial communities. In the present work, 16S rRNA gene amplicon Nanopore sequencing and shotgun metagenomic sequencing were used to study the taxonomic and functional structure of the microbial community forming a biofilm on the inner wall of a laboratory-scale transparent anaerobic biodigester illuminated with natural sunlight. The biofilm was composed of microorganisms involved in the four metabolic processes needed for biogas production, and it was surprisingly rich in Rhodopseudomonas faecalis, a versatile bacterium…

Phototrophic biofilmsBiology7. Clean energyApplied Microbiology and BiotechnologyMicrobiology03 medical and health sciencesBioreactorsBiogasRNA Ribosomal 16SBioreactorAnaerobiosisEcology Evolution Behavior and SystematicsRhodopseudomonas faecalis030304 developmental biology0303 health sciencesBacteriaSewagePhototroph030306 microbiologyMicrobiotaBiofilmSequence Analysis DNAPulp and paper industryArchaeaPhototrophic ProcessesAnaerobic digestion13. Climate actionBiofilmsBiofuelsMetagenomeSewage treatment
researchProduct

Sustainable production of bioactive compounds from sponges: primmorphs as bioreactors

2003

Sponges [phylum Porifera] are a rich source for the isolation of biologically active and pharmacologically valuable compounds with a high potential to become effective drugs for therapeutic use. However, until now, only one compound has been introduced into clinics because of the limited amounts of starting material available for extraction. To overcome this serious problem in line with the rules for a sustainable use of marine resources, the following routes can be pursued; first, chemical synthesis, second, cultivation of sponges in the sea (mariculture), third, growth of sponge specimens in a bioreactor, and fourth, cultivation of sponge cells in vitro in a bioreactor.

Phylum PoriferabiologyPulp and paper industrybiology.organism_classificationBioactive compoundMicrobiologyDNA metabolismSpongechemistry.chemical_compoundSequence homologychemistryBioreactorMaricultureSustainable production
researchProduct

Influence of activated carbon on performance and microbial communities in the treatment of solvent pollutant mixtures in a continuous stirred tank re…

2020

The influence of the addition of granular activated carbon (GAC) on the anaerobic treatment of wastewater with a mixture of ethanol and 1-ethoxy-2-propanol (E2P), which are typical pollutants from the flexographic/printing industry, was evaluated. For this purpose, the reactor performance and microbial community in two continuous stirred tank reactors (CSTRs), i.e. control and GAC supplemented, were assessed. Both reactors, seeded with anaerobic granular biomass, showed similar global performance (RE > 93%), except after organic load shocks and after E2P addition. GAC supplementation substantially enhanced the response of the biological system to organic load shocks and reduced the acclimat…

Pollutant0303 health sciencesEnvironmental Engineeringbiology030306 microbiologyChemistryContinuous stirred-tank reactorBiomassPulp and paper industrybiology.organism_classification03 medical and health scienceschemistry.chemical_compoundMicrobial population biologyWastewatermedicineAcetone030304 developmental biologyWater Science and TechnologyActivated carbonmedicine.drugGeobacterEnvironmental Science: Water Research & Technology
researchProduct

Evaluation of a combined activated carbon prefilter and biotrickling filter system treating variable ethanol and ethyl acetate gaseous emissions

2009

The removal of a 1:1 by weight mixture of ethanol and ethyl acetate was studied in a gas phase biotrickling filter running under conditions that simulated industrial emissions from the flexographic sector, i.e. discontinuous loading (twelve hours per day and five days per week) and oscillating concentration of the inlet stream. Three sets of experimental conditions were tested in which empty-bed residence time varied from 60 to 25s (inlet loads from 50 to 90g Cm -3 h -1 ). The biotrickling filter reached a maximum elimination capacity of 48.5g Cm -3 h -1 (removal efficiency = 68.9%) for an empty-bed residence time of 40 s. A decrease in the residence time from 40 to 25 s adversely affected …

PollutantEnvironmental EngineeringChromatographyEthyl acetateBioengineeringPulp and paper industryResidence time (fluid dynamics)Filter (aquarium)chemistry.chemical_compoundVolume (thermodynamics)chemistryBiofilterBioreactormedicineBiotechnologyActivated carbonmedicine.drugEngineering in Life Sciences
researchProduct

Leaf Biosorbents for the Removal of Heavy Metals

2018

The presence of heavy metals in waters is a global concern. Among various remediation technologies, biosorption is an attractive and promising process since in many cases, it is fast, selective, and highly efficient. Other advantages, such as applicability for various types of pollutants, simplicity, low cost, ease of operation, and the potential reusability of the adsorbents, make it beneficial. Nowadays, more and more green materials, raw or modified, are inclined to be explored instead of conventional adsorbents, within concept of Green Chemistry. This review focuses on the use of leaves-based biosorbents in raw or modified forms to sequestrate heavy metals from waters and wastewaters.

PollutantGreen chemistryEnvironmental remediation0208 environmental biotechnologyBiosorptionHeavy metals02 engineering and technology010501 environmental sciencesPulp and paper industry01 natural sciences020801 environmental engineeringGreen materialsEnvironmental science0105 earth and related environmental sciencesReusability
researchProduct