Search results for "pellet"
showing 10 items of 129 documents
Electric Field Effect on the Thermal Decomposition and Co-combustion of Straw with Solid Fuel Pellets
2019
The aim of this study was to provide more effective use of straw for energy production by co-firing wheat straw pellets with solid fuels (wood, peat pellets) under additional electric control of the combustion characteristics at thermo-chemical conversion of fuel mixtures. Effects of the DC electric field on the main combustion characteristics were studied experimentally using a fixed-bed experimental setup with a heat output up to 4 kW. An axisymmetric electric field was applied to the flame base between the positively charged electrode and the grounded wall of the combustion chamber. The experimental study includes local measurements of the composition of the gasification gas, flame tempe…
Catalytic hydrothermal liquefaction of municipal sludge assisted by formic acid for the production of next-generation fuels
2021
Abstract Hydrothermal liquefaction (HTL) of municipal sludge (MS) was studied at 325 °C and 30 min at 10 and 30% w/w concentration of MS using formic acid (FA) as a green liquid hydrogen donor both in the absence and in the presence of heterogeneous catalysts. Pellets of commercial NiMo/Al2O3, CoMo/Al2O3 and felt of activated carbon ACF 1600 were used as catalysts. The addition of FA at high MS loading allowed to increase the yields in BC from 41 to 62% and its H/C ratio from 1.80 to 2.01 leading to energy recovery (ER) higher than 100%.When heterogeneous catalysts were used together with FA, a marked improvement of BC yields and quality was obtained at 10% MS loading. This behavior was not…
Investigation of European shot-hole borer, Xyleborus dispar (Coleoptera, Scolytidae), in apple orchards of Latvia
2015
European shot-hole borer is known to occur on a wide range of deciduous trees and frequently found on fruit trees in most of the Holarctic. During the last years increased activity of this beetle<em> </em>contributed necessity for investigation of it in apple orchards of Latvia. Because of the latent behavior it is difficult to control distribution of <em>Xyleborus dispar</em>. Often insecticides are not effective, especially if not used in an appropriate time and methods of integrated or biological plant protection are needed. In the current study, results of two year monitoring of <em>X. dispar</em> flying activity and effectiveness of two types of stic…
Who eats first? Uptake of pellet bait by target and non-target species
2002
House mice (Mus domesticus) are an important vertebrate pest in Australian agriculture. We studied the uptake of non-toxic placebo bait pellets targeted on house mice from bait stations in the grain-growing region of southeastern Australia. Bait stations allowed access for either ants; ants and mice or ants, mice, and birds. Soy meal bait pellets offered in December were of low preference for both ants and mice, but were eaten by birds in one study plot. In January, there were no differences between bait stations in the amount of wheat bait pellets removed indicating that the pellet bait had been primarily removed by ants. Most pellet bait was removed during the first 12 h after distributio…
ESP for small scale wood combustion
2009
In this paper new ESP technology developed for fine particle processes are presented. The ESP is based on diffusion charging of particles using sonic jet charger. The ESP concept has been tested using a commercial 20kW wood pellet burner. The removal efficiency was measured to be 80% for submicron particles.
The Properties Of Commercial Alumina Base Materials And Their Effect On The Manufacture Of Active Porous Alumina Supports By Means Of Extrusion
1983
The behaviour of 60 commercial base aluminas (macrocrystalline non-porous gibbsites, microcrystalline non-porous and porous boehmites, thermally activated porous boehmites and gibbsites) was studied via paste processing and extrusion in order to produce active porous alumina pellets. The most decisive properties of the base materials with respect to extrusion were: the degree of dehydration, the mean of aggregate size, the shape of aggregate size distribution, the shape of aggregates, the size of primary crystallites and the specific surface area. The relevance of these properties to those of the final pellets, i.e. crushing strength, porosity, pore volume distribution and specific surface …
A study of densified biochar as carbon source in the silicon and ferrosilicon production
2019
Abstract Biochar pellets were investigated as renewable reducing agents in substitution of coal and coke in the silicon and ferrosilicon production, where a high reactivity, good mechanical properties and low feedstock costs are appreciated. The usage of pyrolysis oil as binder was investigated as way to improve the quality of the pellets. Norway spruce biochar produced at 500, 800 and 1100 °C, was pelletized blended with pyrolysis oil and lignosulphonate. A second heat treatment was carried out at the same temperatures to evaluate the interaction between biochar and pyrolysis oil and to imitate the thermal stability of the pellets when used in a furnace. Density, tensile strength and mecha…
Air gasification of wood chips, wood pellets and grass pellets in a bubbling fluidized bed reactor
2021
Abstract Gasification is an attractive method for biomass-to-energy conversion and fluidized bed design is one of the best options for large scale operation. A bubbling fluidized bed reactor was used to analyze the effects of biomass type, equivalence ratio (ER) and temperature for product gas compositions. Wood chips, wood pellets and grass pellets were gasified between 650 °C and 800 °C temperature. The ER was varied between 0.08 and 0.16. Gasification of grass pellets was difficult at 800 °C due to agglomeration and the gas composition was poor compared to wood. The reactor performances improved over the temperature and 650 °C was not sufficient to achieve a reasonable carbon conversion.…
Thermal Decomposition and Combustion of Microwave Pre-Treated Biomass Pellets
2021
The objective of the study was to investigate a more effective use of commercially available biomass pellets (wheat straw, wood, peat) using microwave pretreatment to improve heat production. Pellets were pretreated using the originally designed microwave torrefaction device. The effects of microwave (mw) pretreatment were quantified, providing measurements of the weight loss and elemental composition of pellets and estimating the effect of mw pretreatment on their porosity, surface area and calorific values at pretreatment temperatures of T = 448–553 K. Obtained results show that the highest structural variations and elemental composition during mw pretreatment were obtained for wheat stra…
Barium depletion study on impregnated cathodes and lifetime prediction
2003
In the thermionic cathodes used in cathode ray-tubes (CRTs), barium is the key element for the electronic emission. In the case of the dispenser cathodes made of a porous tungsten pellet impregnated with Ba, Ca aluminates, the evaporation of Ba determines the cathode lifetime with respect to emission performance in the CRT. The Ba evaporation results in progressive depletion of the impregnating material inside the pellet. In the present work, the Ba depletion with time has been extensively characterized over a large range of cathode temperature. Calculations using the depletion data allowed modeling of the depletion as a function of key parameters. The link between measured depletion and em…