Search results for "persulfate"
showing 9 items of 9 documents
Comparative assessment of a foam-based method for ISCO of coal tar contaminated unsaturated soils
2019
Abstract In situ delivery of liquid reagents in vadose zone is limited by gravity and soil anisotropy. A new foam-based delivery method of persulfate (PS) solutions in unsaturated soils was previously shown to overcome these limitations. The goal of this paper is to demonstrate the efficiency of this method regarding contaminant removal. Hence, the comparative oxidation of 200 mg.kg−1 coal tar artificially contaminated soils with thermally activated PS was carried out after PS-delivery using foam, surfactant solution and pure water. The foam-based method was compared in unfavorable conditions to the reference methods. Especially, in the latter, soil and oxidant solutions were thoroughly mix…
Novel water-swellable beads based on an acryloylated polyaspartamide
2001
Spherical polymeric microparticles have been prepared by a reverse-phase suspension polymerization technique. The starting polymer was α,β-poly (N-2-hydroxyethyl)-dl-aspartamide (PHEA) partially functionalised with glycidylmethacrylate (GMA) in order to introduce reactive vinyl groups in the side chain. The PHEA–GMA copolymer obtained (PHG) was cross-linked in a mixture of water/hexane–carbon tetrachloride in the presence of sorbitan trioleate (Span 85) as surfactant and ammonium persulfate/N,N,N′,N′-tetramethylethylenediamine as initiator system. The reaction was also carried out in the presence of N,N′-dimethylacrylamide as comonomer or N,N′-ethylenebisacrylamide as a cross-linking agent.…
Comparative assessment of a foam-based oxidative treatment of hydrocarbon-contaminated unsaturated and anisotropic soils.
2019
Abstract In situ delivery of liquid reagents in vadose zone is limited by soil anisotropy and gravity. The enhanced delivery of persulfate (PS) as oxidant, using a new foam-based method (F-PS) was compared at bench-scale to traditional water-based (W-PS) and surfactant solution-based (S-PS) deliveries. The goal was to distribute PS uniformly in coal tar-contaminated unsaturated and anisotropic soils, both in terms of permeability and contamination. Water was the less efficiently delivered fluid because of the hydrophobicity of the contaminated soils. Surfactant enhanced PS-distribution into contaminated zones by reducing interfacial tension and inverting soil wettability. Regardless of coal…
Compatibility of surfactants with activated-persulfate for the selective oxidation of PAH in groundwater remediation
2017
Abstract Surfactants foam technology can improve the in situ remediation of hydrophobic organic contaminants by enhancing their solubility and the delivery of remediation chemicals. However, the presence of surfactants may impair the effectiveness of the selective oxidation of those contaminants. To tackle the issue, kinetics and selectivity of phenanthrene (PHE) oxidation in aqueous suspensions and its affecting factors including surfactant concentration (CS) and nature, temperature and persulfate (PS) concentration were studied. Significant differences in selectivity were observed between surfactants, reflecting Coulomb interactions with the anionic oxidizers. Lauryl Betaine (LB) stood ou…
Comparison of cellulose nanocrystals obtained by sulfuric acid hydrolysis and ammonium persulfate, to be used as coating on flexible food-packaging m…
2016
Cellulose nanocrystals (CNCs), extracted from trees, plants, or similar cellulose-containing materials, can be used in combination with other materials to improve their performance or introduce new applications. The main purpose of this study was to compare and understand the potentialities, as coatings for Poly(ethylene terephthalate) films, of CNCs obtained starting from the same cotton linters by two different processes: sulfuric acid hydrolysis and a less common treatment with ammonium persulfate (APS), able to provide also a cellulose oxidation. The results showed that CNCs produced through the APS treatment showed higher charge densities, due to the carboxylic groups formed during the…
Cellulose Nanocrystals from Lignocellulosic Raw Materials
2017
Cellulose nanocrystals (CNCs) are unique, renewable top-down nano particles from which coatings with improved gas barrier properties and new functionalities can be prepared. In this paper, the potential for obtaining such high performing nanocrystals from low-cost lignocellulosic by-products or raw materials is proved by a comparison study on CNCs obtained both from cotton linters and kraft pulp, by means of the ammonium persulfate (APS) process. Morphological and chemical characterization of the nanocrystals obtained, as well as the main functional properties of the poly(ethylene terephthalate) coated films, showed quite similar characteristics and performances of CNCs obtained from pure c…
Synthesis of Nanofibrillated Cellulose by Combined Ammonium Persulphate Treatment with Ultrasound and Mechanical Processing
2018
Ammonium persulfate has been known as an agent for obtaining nanocellulose in recent years, however most research has focused on producing cellulose nanocrystals. A lack of research about combined ammonium persulfate oxidation and common mechanical treatment in order to obtain cellulose nanofibrils has been identified. The objective of this research was to obtain and investigate carboxylated cellulose nanofibrils produced by ammonium persulfate oxidation combined with ultrasonic and mechanical treatment. Light microscopy, atomic force microscopy (AFM), powder X-Ray diffraction (PXRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and Zeta potential measure…
Cellulose Nanocrystals from Lignocellulosic Raw Materials, for Oxygen Barrier Coatings on Food Packaging Films
2017
Cellulose nanocrystals (CNCs) are unique, renewable top-down nano particles from which coatings with improved gas barrier properties and new functionalities can be prepared. In this paper, the potential for obtaining such high performing nanocrystals from low-cost lignocellulosic by-products or raw materials is proved by a comparison study on CNCs obtained both from cotton linters and kraft pulp, by means of the ammonium persulfate (APS) process. Morphological and chemical characterization of the nanocrystals obtained, as well as the main functional properties of the poly(ethylene terephthalate) coated films, showed quite similar characteristics and performances of CNCs obtained from pure c…
Degradation of Antibiotic Vancomycin by UV Photolysis and Pulsed Corona Discharge Combined with Extrinsic Oxidants
2023
Antibiotics are the most frequently detected pharmaceuticals in the environment creating conditions for the development of resistant genes in bacteria. Degradation and mineralization of glycopeptide antibiotic vancomycin (VMN) were examined by UV photolysis, pulsed corona discharge (PCD), and their combinations with extrinsic oxidants, hydrogen peroxide (HP), peroxydisulfate (PDS), and peroxymonosulfate (PMS). Both combinations were effective in VMN degradation and faster at pH 11 than in acidic or neutral media. Combined with the UV photolysis, HP showed a higher oxidation rate than other oxidants, whereas PMS and PDS proved to be more efficient in combinations with PCD. In contrast to low…