Search results for "photocatalysi"

Study on a photocatalytic membrane reactor for water purification

2000

Abstract Some results obtained in a photocatalytic membrane reactor, to be used for degradation of toxic organic species dissolved in water, are reported. The catalyst, TiO 2 P25 Degussa, was immobilised by means of a flat sheet polymeric membrane and 4-Nitrophenol (4-NP) was used as a model molecule to evaluate the reactor performance. A preliminary investigation of the stability, under UV irradiation, of some eligible polymeric membranes was carried out by using scanning electron microscopy (SEM), optical microscopy (OM), determinations of water permeation flux (WPF) and total organic carbon (TOC). These tests showed that commercial membranes made of fluoride + PP (FS 50 PP-Dow), polysulp…

CO2 conversion in a photocatalytic continuous membrane reactor

2016

The reduction of CO2 with water by using photocatalysts is one of the most promising new methods for achieving CO2 conversion to valuable hydrocarbons such as methanol (MeOH). In this work, prepared TiO2-Nafion (TM)-based membranes were used in a photocatalytic membrane reactor, operated in continuous mode, for converting CO2 to methanol. By using the membrane with the best TiO2 distribution, a MeOH flow rate/TiO2 weight of 45 mu mol (g(catalyst) h)(-1) was measured when operating at 2 bar of feed pressure. This value is higher than those reported in most of the literature data to date. Moreover, methanol production is considered as a relevant advance over the existing literature results wh…

Microwave-assisted chemical modification of g-C3N4 for photoinduced processes: organic degradation, hydrogen production and selective oxidation of al…

2023

g-C3N4 powders were treated by means of the microwave technique in three different aqueous and organic media (HNO3, NaOH and N,N-dimethylformamide). All powders were analyzed by XRD reveling that g-C3N4 maintains its structure. The morphology of the samples was analyzed with scanning electron microscopy, where the micrographs reveals that the modifcation occurs on the surface of the g-C3N4. The photocatalytic activity of the samples was evaluated in the degradation of ciprofoxacin, hydrogen production and for the selective partial oxidation of 4-methoxybenzylalcohol (4-MBA) to its aldehyde. The sample treated with HNO3 (C3N4-HNO3) shows the best photocatalytic performance in the degradation…

Genotoxicity of citrus wastewater in prokaryotic and eukaryotic cells and efficiency of heterogeneous photocatalysis by TiO(2).

2012

Abstract The presence of (±)α-pinene, (+)β-pinene, (+)3-carene, and R-(+)limonene terpenes in wastewater of a citrus transformation factory was detected and analyzed, in a previous study, by using Solid Phase Micro-extraction (SPME) followed by GC analyses. Purpose of that research was to compare the genotoxic responses of mixtures of terpenes with the genotoxicity of the individual compounds, and the biological effects of actual wastewater. Genotoxicity was evaluated in the Salmonella reversion assay (Ames test) and in V79 cells by Comet assay. Ames tests indicated that the four single terpenes did not induce an increase of revertants frequency. On the contrary, the mixtures of terpenes ca…

Photocatalytic coalescence of functionalized gold nanoparticles.

2009

A novel strategy for the synthesis of chromophore-functionalized AuNPs with a narrow size distribution is reported. It consists of increasing the size of preprepared NPs by means of a fast (second scale) and clean (light and an organic photocatalyst) method. The results agree with thiolate ligand liberation from the NP surface promoted by photogenerated radicals. This lets gold cores come together and finally coalesce.

A simple method to fabricate high-performance nanostructured WO3 photocatalysts with adjusted morphology in the presence of complexing agents

2017

[EN] The rich and complex chemistry of tungsten was employed to synthesize innovative WO3 nanoplatelets/nanosheets by simple anodization in acidic electrolytes containing different concentrations of complexing agents or ligands, namely F- and H2O2. The morphological and photoelectrochemical properties of these nanostructures were characterized. The best of these nanostructures generated stable photocurrent densities of ca. 1.8 mA cm(-2) at relatively low bias potentials (for WO3) of 0.7 V-Ag/AgCl under simulated solar irradiation, which can be attributed to a very high active surface area. This work demonstrates that the morphology and dimensions of these nanostructures, as well as their ph…

Preparation, characterization and photocatalytic activity of Phtalocyanine-doped TiO2/ORMOSIL thin films

2008

Recent Advances in Photocatalytic Functionalization of Quinoxalin‐2‐ones

2020

Quinoxalin‐2(1H)‐one is an important class of nitrogen heterocycle in medicinal and pharmaceutical industry, which became a synthetic target in organic chemistry in recent years. This review covers the recent advances in the functionalization of this particular nitrogen heterocycle through photocatalysis.

Two-Dimensional Modeling of a Flat-Plate Photocatalytic Reactor for Oxidation of Indoor Air Pollutants

2007

In this paper we present a two-dimensional (2-D) analysis of a narrow-slit, flat-plate, single-pass, flow-through photocatalytic reactor for air purification. The continuity equation for convection and diffusion in two dimensions, under un-steady-state conditions, was coupled with radiation field modeling and photocatalytic reaction kinetics to model the transient and steady-state behavior of the reactor. The model was applied to the photocatalytic oxidation of trichloroethylene (TCE) in humidified air streams under different experimental conditions. The kinetic parameters determined by a three-dimensional (3-D) computational fluid dynamics model of the reactor were used in the 2-D model si…

Structural and surface characterization of the polycrystalline system CrxOy · TiO2 employed for photoreduction of dinitrogen and photodegradation of …

1992

The polycrystalline system CrxOy-TiO2, used as a catalyst for photoreactions, was studied by X-ray diffractometric method, visible-ultraviolet diffuse reflectance and infrared spectroscopic methods, surface area determination, and porosimetry to characterize its structural and surface features. Two series of catalysts were prepared by two different methods, namely by coprecipitation and by impregnation. The first series was tested as photocatalysts for the dinitrogen photoreduction in a gas-solid regime and for the phenol photodegradation in a liquid-solid regime. The results indicate that the interaction of chromium ions with OH groups modifies the surface properties of the supports and co…