Search results for "photodegradation"
showing 10 items of 153 documents
Influence of some aromatic and aliphatic compounds on the rate of photodegradation of phenol in aqueous suspensions of TiO2
1995
Abstract The influence of 3-nitrophenol, 4-nitrophenol, pentachlorophenol, ethanol, 2-propanol, ethanoic acid and ethanedioic acid on the photodegradation rate of phenol in an aqueous suspension of TiO2 (anatase) irradiated in the near-UV region was investigated. Binary mixtures of organic compound and phenol in molar ratios of 1:1 and 10:1 were used for the photoreactivity experiments performed in a batch reactor. The mineralization rate of all the mixtures was also monitored by measuring the total organic carbon (TOC) concentration. The reactivity results indicate that the photodegradation rate of phenol is mainly determined by the total amount of aromatic substrates present in the reacti…
Adducts of free-base meso-tetraarylporphyrins with trihaloacetic acids: Structure and photostability
2020
Abstract Four diverse meso-tetraarylporphyrins in the form of diprotonated adducts with trifluoro-, trichloro-, tribromoacetic acids and acetic acid were investigated in benzene solution. Despite similar structural distortion of the chromophore system due to protonation, the respective adducts demonstrated different photostability when exposed to UV irradiation. The trifluoro- and trichloroacetic adducts, and the acetic acid one, showed some common features both molecular and in the mechanism of photodegradation. However, the tribromo-derivative decayed according to a different kinetic scheme, revealing a considerable impact of the bromine atoms upon the pyrrole units of the porphyrin macro…
Influence of operational variables on the photodegradation kinetics of Monuron in aqueous titanium dioxide dispersions
1994
The degradation of Monuron [N′—(4-chlorophenyl)—N, N dimethyl urea] in aqueous TiO 2 dispersions irradiated in the near-UV region has been investigated using a Pyrex batch photoreactor. The influence on the degradation kinetics of pH, initial Monuron concentration and catalyst concentration has been studied. The mineralization of the pollutant was also investigated. Measurements of photon absorbed flows allowed to determine the quantum yield values; they were found to increase by increasing the initial pH of the dispersion.
Heterostructured metal oxides-ZnO nanorods films prepared by SPPS route for photodegradation applications
2019
Abstract This work presents the first preparation using the Solution Precursor Plasma Spray process of heterostructured films associating ZnO nanorods (NRs) and various metal oxides (CuO, Fe2O3 and Co3O4) by Solution Precursor Plasma Spray process. These CuO/ZnO, Fe2O3/ZnO and Co3O4/ZnO films exhibit hierarchically chocolate sticks-like, dandelion-like or chrysanthemum-like surface morphologies. These heterostructures were confirmed by SEM, XRD, EDS and Raman analyses. The bandgaps of heterostructured films are narrower than that of pure ZnO. The CuO/ZnO film exhibits the highest photocatalytic activity both under UV and visible light irradiation for the degradation of the Orange II dye due…
Preparation and photoactivity of nanocrystalline TiO2 powders obtained by thermohydrolysis of TiOSO4
2013
Nanocrystalline TiO2 photocatalysts were synthesized in mild conditions by thermohydrolysis of TiOSO4 in water at 100 °C and post-calcination treatment at various temperatures. The TiO2 powders were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, specific surface area determinations, scanning electron microscopy and electron paramagnetic resonance measurements. The photoactivity of the samples was tested employing the photodegradation of 4-nitrophenol in liquid–solid regimen and the photooxidation of gaseous 2-propanol. The best results were obtained with the powder calcined at 600 °C for 10 h. Surprisingly, the not calcined sample was the most active for the abatement…
Magnetic hybrid nanomaterials for the photodegradation of microcontaminats in aqueous environment
2018
Bio-based substances (BBS) isolated from urban biowaste have been employed to prepare hybrid magnetic nanomaterials with iron oxides. Such materials have been tested, in the presence of hydrogen peroxide, for the light induced photodegradation of four microcontaminants (MCs) in aqueous environment: Carbamazepine (C, an anticonvulsant and analgesic drug), Flumequine (F, an antibiotic), Ibuprofen (I, a non-steroidal anti-inflammatory drug), and Sulfamethoxazole (S, an antibiotic). Preliminary photodegradation experiments were carried out at lab-scale in a solar simulator, whereas optimized experiments were carried out in a pilot plant under natural solar radiation. The MCs complete abatement …
Coupled Semiconductor Systems for Photocatalysis. Preparation and Characterization of Polycrystalline Mixed WO3/WS2 Powders
1999
Mixed WO3/WS2 powders were prepared by oxidation of WS2. The physical properties of the samples were characterized by X-ray diffraction, diffuse reflectance spectroscopy, and scanning electron microscopy; they were strongly dependent upon the time and temperature of oxidation. The chemical state and the elemental distribution of the sample surface were investigated by X-ray photoelectron spectroscopy. The photocatalytic results have showed that the aqueous suspensions of the mixed WO3/WS2 systems have significantly higher activities than pure WS2 and WO3 for the photodegradation of phenol. The enhanced performance can be related to the presence of heterojunctions WO3/WS2 on the single parti…
Sol-gel derived anatase TiO2: morphology and photoactivity
1994
Abstract High-surface area TiO 2 (anatase) was prepared by the sol-gel method and characterized by various instrumental and analytical methods, including X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, porosimetry, specific surface area measurements, scanning electron microscopy, and titration of surface hydroxyl groups. The specimen was tested for photodegradation of phenol and nitrophenols carried out in aqueous suspension at pH = 3; photoactivity was compared with that of commercially available anatase TiO 2 . Results are discussed in terms of porosity, surface area, and availability and population of surface OH groups, consequent upon the particular method used for…
ZnO nanorods covered with a TiO2 layer: simple sol–gel preparation, and optical, photocatalytic and photoelectrochemical properties
2015
In this work, composite core–shell ZnO/TiO2 materials were fabricated by deposition of TiO2 layers via a sol–gel method onto ZnO nanorods hydrothermally grown on an ITO electrode. Two approaches to the sol–gel procedure resulted in strongly different morphologies and thicknesses of the deposited TiO2 layer, as shown in electron microscopy studies. The decrease of the optical band gap energies of the ZnO/TiO2 composites by about 0.2–0.3 eV with respect to the TiO2 nanoparticles and ZnO nanorods was determined from UV-Vis diffuse reflectance spectra. The photocatalytic activities of the systems were determined by investigation of the decolorization of Methylene Blue (MB) in aqueous solution, …
Photocatalytic oxidation of toluene on irradiated TiO2: comparison of degradation performance in humidified air, in water and in water containing a z…
2003
Photocatalytic degradation of toluene was carried out both in gas–solid and in liquid–solid regime by using polycrystalline samples of TiO2 Merck and TiO2 Degussa P25. For the gas–solid regime two types of continuous photoreactor were used, a fixed bed one of cylindrical shape and a Carberry type photoreactor, both irradiated by near-UV light. The inlet reacting mixture consisted of air containing toluene and water vapours. The influence of the gas flow rate and the presence of water vapour on the photocatalytic process was investigated. CO2 and benzaldehyde were the toluene degradation products detected in the gas phase by using TiO2 Merck. In the presence of water vapour this catalyst exh…