Search results for "phthalate"

Liquid Crystalline Copolyester Made from Recycled Polyethylene Terephthalate and p-Acetoxybenzoic Acid: Synthesis, Characterization and Blending with…

2013

Manufacturing, structure and properties of recycled polyethylene terephthalate /liquid crystal polymer/montmorillonite clay nanocomposites

2013

Polyethylene terephthalate (PET)/liquid crystal polymer (LCP)/monthmorillonite clay (MMT) compositions were obtained by melt mixing. Their mechanical, structural, rheological and thermal properties were investigated.

Morphology and properties of compatibilized PP/PET melt spun fibers

2017

This work provides a study on the influence of a rubbery compatibilizer on the morphology and on the physical properties of polypropylene (PP)/polyethylenetherephthalate(PET) melt spun fibers at different hot draw ratios. In particular, a sample of SEBS copolymer grafted with maleic anhydride was used as compatibilizer. Both the uncompatibilized PP/PET blend and the compatibilized one were prepared by melt compounding in a counter-rotating twin-screw extruder. The materials have been characterized from a rheological, morphological and mechanical point of view. The addition of the compatibilizer increased the viscosity in shear flow of the uncompatibilized blend, and significantly improved t…

Removal of bis (2-ethylhexyl) phthalate from reject water in a nitrogen-removing sequencing batch reactor.

2003

Reject water from sewage sludge processing may contain high concentrations of nutrients and organic pollutants and cause internal pollution load at a sewage treatment plant (STP) if circulated to the headworks of an STP. In the present study removal of nitrogen and bis (2-ethylhexyl) phthalate (DEHP) from reject water was studied in two sequencing batch reactors (SBRs) with different aerobic/anoxic periods during a 6-h total cycle period. Ammonia-nitrogen (NH(4)-N) was almost totally removed in both reactors, apparently by nitrification throughout the run, while denitrification declined with decreasing SCOD in the influent resulting in an increase in the effluent nitrate-nitrogen (NO(3)-N) …

Occurrence and removal of organic pollutants in sewages and landfill leachates

2002

Sewages of different composition and the effluents of four sewage treatment plants (STPs), plus sewage sludges were analysed for semivolatile organic priority pollutants. Furthermore, 11 landfill leachates were analysed to evaluate their contribution to sewage pollutants when co-treated. Bis(2-ethylhexyl) phthalate (DEHP) was the pollutant occurring at highest concentrations (up to 122 microg/l) and it was present in all sewages and leachates; concentrations of other phthalates were usually below 17 microg/l. Some polycyclic aromatic hydrocarbons (PAH) (<1 microg/l) and 2,6-dinitrotoluene (< or =5.9 microg/l) were also present in many of the sewages and leachates. Phthalates were present in…

Removal of bis(2-ethylhexyl) phthalate at a sewage treatment plant

2003

Bis(2-ethylhexyl) phthalate (DEHP) concentrations were measured at different stages in a full-scale sewage treatment plant (STP) and mass balances were calculated. The DEHP load to treatment process coming from the sewer system and the internal load comprising returned supernatants and filtrate from sludge treatment and excess secondary sludge were at the same level. The DEHP removal efficiency from the water phase at the STP was on average 94% of sewage DEHP, the main removal process being sorption to primary and secondary sludges. On average 29% of DEHP was calculated to be removed in the biological nitrifying-denitrifying activated sludge process, which was much less than expected from l…

Plasticizer extraction of Taxol infusion solution from various infusion devices.

1996

Taxol solution extracts the plasticizer DEHP (di(2-ethylhexyl)phthalate) from polyvinyl chloride (PVC) materials. In order to minimize patient exposure to DEHP, Taxol solutions should be prepared and administered in PVC-free materials. Particulate matter may form in Taxol infusion solution over time, so that in-line filtration with microporous membranes not greater than 0.22 microns is advisable. The purpose of this study was to evaluate the suitability of various administration- and in-line filter-sets for Taxol application. The extent of leached DEHP was determined using a Reversed Phase HPLC assay specific for DEHP. The four tested administration-sets, labeled as PVC-free, were all found…

Biomimetic strategy towards gelatin coatings on PET. Effect of protocol on coating stability and cell-interactive properties

2019

Gelatin-modified poly(ethylene terephthalate) (PET) surfaces have been previously realized via an intermediate dopamine coating procedure that resulted in surfaces with superior haemocompatibility compared to unfunctionalized PET. The present study addresses the biocompatibility assessment of these coated PET surfaces. In this context, the stability of the gelatin coating upon exposure to physiological conditions and its cell-interactive properties were investigated. The proposed gelatin–dopamine-PET surfaces showed an increased protein coating stability up to 24 days and promoted the attachment and spreading of both endothelial cells (ECs) and smooth muscle cells (SMCs). In parallel, physi…

Humidity-enhanced sub-ppm sensitivity to ammonia of covalently functionalized single-wall carbon nanotube bundle layers

2017

International audience; A low-cost method for carbon nanotubes (CNTs) network production from solutions on flexible polyethylene naphthalate substrates has been adopted to prepare high quality and well characterized SWCNT bundle layers to be used as the active layer in chemiresistor gas sensors. Two types of SWCNTs have been tested: pristine SWCNTs, deposited from a surfactant solution, and covalently functionalized SWCNTs, deposited from a dimethyl-acetamide solution. The humidity effects on the sensitivity of the SWCNTs network to NH3 have been investigated. The results show that relative humidity favors the response to NH3, confirming recent theoretical predictions. The COOH-functionaliz…

Assessment of microplastics and other contaminants in marine vertebrates from the Western Mediterranean Sea

2023

Mediterranean marine biodiversity is under threat by pollution. For this reason, the main objective of this thesis was to analyse the presence of pollutants of concern in Mediterranean marine species. These studies are located in the Valencian Community (Spain), where we find loggerhead turtles, striped dolphins, and jewel lanternfish. Hence, we: 1. Analysed pesticides, heavy metals and phthalates in tissues of loggerhead turtles. 2. Studied microdebris present in beaches that are sporadically used as nesting grounds by loggerhead turtles. 3. Analysed striped dolphins# exposure to microplastics. 4. Quantified jewel lanternfish exposure to microplastics and tested their role as bioindicators…