Search results for "plasmon"
showing 10 items of 614 documents
Bend- and splitting loss of dielectric-loaded surface plasmon-polariton waveguides.
2008
International audience; The design, fabrication, characterization, and modeling of basic building blocks of plasmonic circuitry based on dielectric- loaded surface polariton waveguides, such as bends, splitters, and Mach- Zehnder interferometers are presented. The plasmonic components are realized by depositing subwavelength dielectric ridges on a smooth gold film using mass-production- compatible UV-photolithography. The near-field characterization at telecommunication wavelengths shows the strong mode confinement and low radiation and bend losses. The performance of the devices is found in good agreement with results obtained by full vectorial three-dimensional finite element simulations.…
Surface plasmon routing along right angle bent metal strips
2005
International audience; An efficient routing of surface plasmon polaritons (SPP) is of fundamental importance in the development of SPP-based photonics. This paper reports that microgratings acting as Bragg mirrors can guide SPP along metal stripes waveguides featuring 90 degrees bents. The measurement of the mirrors efficiency, performed by means of photon scanning tunneling microscopy, shows that bent losses as low as 1.9 dB can be achieved. Finally, we demonstrate operating SPP beamsplitters obtained by an appropriate design of the Bragg mirrors constituting elements. (c) 2005 American Institute of Physics.
Near-field observation of surface plasmon polariton propagation on thin metal stripes
2001
International audience; We use a photon scanning tunneling microscope to probe the field of surface plasmon polariton modes excited on finite-width thin metal films (metal stripes). We first investigate the coupling between surface plasmons launched by a focused beam on a homogeneous thin film and the modes sustained by metal stripes of different widths. We show that. if the width of the metal stripe is about a few micrometers, a strong coupling with the stripe modes can be achieved at visible frequencies. A sharp transverse confinement of the field associated with the surface plasmon modes propagating on the metal stripe is unambiguously observed on the constant height photon scanning tunn…
Local detection of the optical magnetic field in the near zone of dielectric samples
2000
International audience; We present a study of the influence of the probe composition on the formation of constant-height photon scanning tunneling microscope images when observing a dielectric sample. Dramatic effects due to the metallization of the tip are presented and discussed in detail. We show how the recorded images can look quite different when the probe is dielectric or coated with gold. Comparison with numerical calculations indicate that the experimental signals are of electric or magnetic nature depending on the composition of the tip. For well-defined conditions, gold-coated tips provide images of the distribution of the magnetic field intensity associated with the optical near…
Dielectric-loaded surface plasmon-polariton waveguides at telecommunication wavelengths: Excitation and characterization
2008
International audience; The excitation and propagation of strongly confined surface plasmon-polariton (SPP) waveguide modes, supported by 500-nm-wide and 550-nm-high dielectric ridges fabricated on smooth gold films, are investigated at telecommunication wavelengths using a scanning near-field optical microscope. Different tapering structures for coupling of SPPs, excited at bare gold surfaces, into dielectric-loaded SPP waveguide (DLSPPW) modes are considered. The DLSPPW mode confinement and propagation loss are characterized. The DLSPPW mode propagation along an S bend having the smallest curvature radius of 2.48 mu m is shown, demonstrating the potential of DLSPPW technology for the real…
Spatially resolved transmission through metal films by plasmon excitation
2007
International audience
Fabrication and optical characterization of long-range plasmonic waveguide interconnects for Tb/s datacom links
2019
Since the 1980s, researchers have been trying to design so-called "optical" computers, in which electrical signals would be replaced by photonic signals. For this, it is necessary to look at interconnection problems between components. This thesis deals with the problem of optical interconnection between electronic components. In order to propose a solution to this problem, we will study two types of plasmonic structures, a first structure of a single solid block where the information wave is reflected on an air prism, this structure is composed of a guide of metal wave covered with a layer of photoresist and it is named "ultra-long-distance plasmonic guide" (ULR-SPP). The second structure …
Analysis of the Bloch mode spectra of surface polaritonic crystals in the weak and strong coupling regimes: grating-enhanced transmission at oblique …
2004
The Bloch mode spectrum of surface plasmon polaritons (SPPs) on a finite thickness metal film has been analyzed in the regimes of weak and strong coupling between SPP modes on the opposite film interfaces. The SPP mode dispersion and associated field distributions have been studied. The results have been applied to the description of the light transmission through thick and thin periodically structured metal films at oblique incidence. In contrast to normal incidence, all SPP Bloch modes on a grating structure participate in the resonant photon tunnelling leading to the transmission enhancement. However, at the angle of incidence corresponding to the crossing of different symmetry film SPP …
Excitation and characterization of dielectric-loaded surface plasmon-polariton waveguides at telecommunication wavelengths - art. no. 69880T
2008
International audience; The excitation of surface plasmon-polariton (SPP) waveguide modes in 500-nm-wide and 550-nm-high dielectric ridges deposited on a thin gold film is characterized at telecommunication wavelengths, by application of a scanning near-field optical microscope (SNOM), and by utilizing the finite element method (FEM). Different tapering structures for coupling in SPPs, excited at the bare gold-air interface, are investigated with a SNOM, and the dependence of in coupling efficiency on tapering length is characterized by means of FEM calculations. The performance of this in coupling method is compared to an alternative excitation scheme, where the effective index of SPPs in …
Étude et manipulation de modes résonants en champ proche optique
2010
Within the quick nano-fabrication techniques evolution and the increasing needs in low space and energy opto-electronic functions on-chip integration, studies and control of electromagnetic resonances of sub-micrometric objects are crucial issues. One aim of this work was then to improve our knowledge of the light-matter interaction. To this end, optical near-field experiments and complementary numerical development of models have been performed to study electromagnetic resonances due to light-matter interaction in sub-micrometric resonators. As an introduction, the first part of the manuscript presents the main phenomena involved in near-field optical microscopy and the used SNOM operation…