Search results for "plastic"

Corrigendum to “The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA” [Polym Degrad S…

2012

Novel silicon microparticles to improve sunlight stability of raw polypropylene

2015

Oxidation of polyolefins by ultraviolet/visible irradiation is a significant limitation for their use in several technological applications. The use of high-tech additives such as silicon microparticles becomes a compositing strategy that can improve the performance of these materials at long-term service conditions. Silicon particles were added to non-additivated raw polypropylene (PP) prepared by hot melt extrusion and subjected to accelerated sunlight irradiation tests. The stability of thermal properties, mechanical performance and thermal decomposition behaviour of composites was evaluated by differential scanning calorimetry, dynamic mechanical thermal analysis and thermogravimetry. T…

Changes in surface stress, morphology and chemical composition of silica and silicon nitride surfaces during the etching by gaseous HF acid

2007

Abstract HF acid attack of SiO2 and Si3N4 substrates is analyzed to improve the sensitivity of a sensor based on microcantilever. Ex situ analysis of the etching using XPS, SIMS and AFM show significant changes in the anisotropy and the rate of the etching of the oxides on SiO2 and Si3N4 surface. Those differences influence the kinetic evolution of the plastic bending deflection of the cantilever coated with SiO2 and Si3N4 layer, respectively. The linear dependence between the HF concentration and the Si3N4 cantilever bending corresponds to a deep attack of the layer whereas the non-linear behavior observed for SiO2 layer can be explained by a combination of deep and lateral etching. The ca…

New method of bone reconstruction designed for skull base surgery

2008

The direct endonasal or transoral transclival approaches to the skull base permit effective, minimally invasive surgery along the clivus. Developing long-term, effective techniques to prevent cerebrospinal fluid (CSF) leaks and their consequences (infection and delayed healing) remains a major challenge. In this study we describe a method of bone reconstruction newly developed by us, which uses a custom designed silicone plug for bone replacement after minimally invasive skull base surgery with a low incidence of postoperative CSF leaks. German Landrace pigs were used to test the efficiency of the new technique. Twelve craniotomies were performed in six pigs using a subtemporal approach and…

Reactivity of antitumor coinage metal-based N-heterocyclic carbene complexes with cysteine and selenocysteine protein sites

2021

Abstract The reaction of the antitumor M(I)-bis-N-heterocyclic carbene (M(I)-NHC) complexes, M = Cu, Ag, and Au, with their potential protein binding sites, i.e. cysteine and selenocysteine, was investigated by means of density functional theory approaches. Capped cysteine and selenocysteine were employed to better model the corresponding residues environment within peptide structures. By assuming the neutral or deprotonated form of the side chains of these amino acids and by considering the possible assistance of an external proton donor such as an adjacent acidic residue or the acidic component of the surrounding buffer environment, we devised five possible routes leading to the binding o…

Development and Characterization of Silver-Based Antimicrobial Ethylene–Vinyl Alcohol Copolymer (EVOH) Films for Food-Packaging Applications

2012

The use of silver as an antimicrobial in the food area has raised wide interest in recent years. In the present work, 0.001-10 wt % silver ions was satisfactorily incorporated into an ethylene-vinyl alcohol (EVOH) copolymer matrix by a solvent casting technique. The antibacterial efficacy of the composite was evaluated under laboratory conditions and in contact with some foods. The ionic compound did not affect the crystallinity or the water-induced plasticization of the materials and was homogeneously distributed across the surface and thickness of the films. When immersed in water, sorption-induced release of 50-100% of the silver ions took place in30 min. In the bacterial minimal growth …

Cooperative Catechol-Functionalized Polypept(o)ide Brushes and Ag Nanoparticles for Combination of Protein Resistance and Antimicrobial Activity on M…

2018

Prevention of biofouling and microbial contamination of implanted biomedical devices is essential to maintain their functionality and biocompatibility. For this purpose, polypept(o)ide block copolymers have been developed, in which a protein-resistant polysarcosine (pSar) block is combined with a dopamine-modified poly(glutamic acid) block for surface coating and silver nanoparticles (Ag NPs) formation. In the development of a novel, versatile, and biocompatible antibacterial surface coating, block lengths pSar were varied to derive structure-property relationships. Notably, the catechol moiety performs two important tasks in parallel; primarily it acts as an efficient anchoring group to me…

Numerical Calibration of a Simplified Model for FRP Confinement of Columns

2018

This paper presents the calibration of a simplified analytical model for concrete columns confined by fiber reinforced polymer (FRP) jackets. The model allows evaluating the increase of strength, ductility and dissipated energy without defining the lateral confinement pressure and it can be easily extended for the assessment of FRP confinement in design applications. This model was obtained by a simplified procedure based on the best fit of experimental data available in the literature and the coefficient of determination (R2) was evaluated in order to estimate the accuracy of the regression analysis. A numerical database resulting from finite element (FE) analyses was compiled and reported…

Simplified analytical models for compressed concrete columns confined by FRP and FRCM system

2017

In order to consider the response of concrete columns confined by FRP and FRCM system, proper models have to be formulated. In this context the present paper shows a generalized criterion for the determination of the increase in strength, in ductility and in dissipated energy for varying corner radius ratio of the cross section and fiber volumetric ratio. The procedure is based on the best fitting of several experimental data and unlike the usual empirical approaches available in the literature, the proposed technique relates the confinement effectiveness to a single parameter representative of the relative stiffness between the original concrete core and the reinforcement system. Furthermo…

The joint adverse effects of aged nanoscale plastic debris and their co-occurring benzo[α]pyrene in freshwater mussel (Anodonta anatina)

2021

Although the presence of small-scale plastics, including nanoscale plastic debris (NPD, size1 μm), is expected in the environment, our understanding of their potential uptake and biodistribution in organisms is still limited. This mostly is because of the limitations in analytical techniques to characterize NPD in organisms' bodies. Moreover, it is still debatable whether aged NPD can sorb and transfer chemicals into organisms. Here, we apply iron oxide-doped polystyrene nanoparticles (Fe-PS NPs) of 270 nm size to quantify the uptake and biodistribution of NPD in freshwater mussels (Anodonta anatina). The Fe-PS NPs were, first, oxidized using heat-activated potassium persulfate treatments t…