Search results for "plastic"

Vinylic polymerization of norbornene by Pd(II)-catalysis in the presence of ethylene

1997

Pd(II) catalysts with nitrilo ligands and BF4− counter ions give the best results in vinylic polymerization of norbornene. Absolute molecular weight determination of polynorbornene (PN) by means of light scattering and the three-dimensional shape of PN were also investigated. By correlation of molecular weights Mw with intrinsic viscosity (Staudinger-index) [η], yield a close to 0.5 exponent for the Mark-Houwink equation with solvents chlorobenzene and cyclohexane at 25°C expected for polymer molecules with confined conformation. The vinylic polymerization of norbornene with [(CH3CN)4Pd][BF4]2 (I) in nitromethane in the presence of ethylene results in PN with narrow molecular weight distrib…

Synthesis of low density poly(ethylene) using nickel iminophosphonamide complexes

2007

Ethylene polymerization using a catalyst derived from the reaction of the phosphorane (Me3Si)2NP(NSiMe3)2 (1) with either Ni(COD)2 or bis(π-allyl)Ni complexes affords branched poly(ethylene) (PE) of variable MW (103−106) depending on conditions. The branched PE of high MW is semicrystalline with Tm < 100 °C. High field 13C NMR spectra reveal the presence of methyl branches (ca. 10−15 per 1000 C atoms), branches longer than six C atoms (15−20 per 1000 C atoms) and trace levels of ethyl, propyl, n-butyl, and sec-butyl branches (total <2 per 1000 C atoms). The branching distribution changes modestly in response to changes in ethylene pressure in a manner consistent with a chain-walking mechani…

Tailoring the anionic function and the side chains of comb-like superplasticizers to improve their adsorption

2015

Nowadays admixtures and especially superplasticizers are unavoidable components of the concrete formulation. The high fluidizing efficiency of the comb-like superplasticizers must not overshadow their high costs. This study aims to determine the PCE structure parameters which influence their adsorption in order to enhance their resistance to sulfate competitive adsorption and thus minimize their dosage. The PCE adsorption has been studied on calcite and ettringite which are both surfaces representative of early hydrating cement. The effect of the POE side chain length and density and also of the PCE anionic function i.e. carboxylate, dicarboxylate or phosphate on the adsorption has been ana…

Correlation between processability and properties of a high density polyethylene by a rheological approach

2002

The thermal-oxidative and thermal-mechanical stability of high density polyethylene (chromium based catalyst technology) was examined at many different temperatures using a rheological approach. The changes in molecular structure, which take place during processing, have been studied using a Clextral co-rotating twin-screw extruder in comparison with dynamic measurements performed with a rotational rheometer under definite conditions of temperature, strain and frequency and in presence of air. In order to evaluate the degradation response, an investigation of elastic modulus G' as a function of frequency ω on the residual sample after ageing has been carried out. The molecular weight increa…

UV-Free Microfluidic Particle Fabrication at Low Temperature Using ARGET-ATRP as the Initiator System

2016

Characterization of a fiber-reinforced new fully aromatic liquid crystalline polymer

1998

A new rigid liquid crystalline polymer that demonstrates good mechanical and thermomechanical properties and acceptable processing temperature has been recently synthesized and characterized. The melting temperature and some thermomechanical properties do not seem, however, suitable for use in some applications at high temperature or in the presence of aggressive fluids. The use of appropriate inorganic fillers can overcome these shortcomings. In this work the new LCP, polymerized in a bench-scale apparatus, and the same sample filled with carbon fibers are characterized. The properties of the carbon fiber filled LCP are compared with those of another filled wholly aromatic commercial LCP,…

Effect of compatibilization on the photo-oxidation behaviour of polyethylene/polyamide 6 blends and their nanocomposites

2015

Abstract Polymer based nanocomposites are increasingly attracting interest from academia and industry, and the use of polymer blends as matrices greatly increase their potential field of application. In order to improve their characteristics, the use of compatibilizers acting on the blend components is mandatory. However, this also leads to rising concerns regarding the behaviour of polymer blend based nanocomposites upon being subjected to photo-oxidative degradation. It is known that morphology can deeply influence the photo-oxidative behaviour, and this can be therefore deeply influenced by the blend components and by the use of compatibilizers. In this work, polymer blend nanocomposites…

Rheological study of gel phenomena during epoxide network formation in the presence of sepiolite

2012

The dynamic behaviour during the crosslinking of an epoxy polymer near the gel point was monitored using rheological multiple frequency experiments. The influence of a needle-shaped inorganic nanofiller, sepiolite, either non-modified or organically surface modified during the cure process in the presence of an aliphatic and an aromatic hardener was investigated. The validity of various criteria for determining the gel point was examined for the crosslinking of these filled thermosets. The Winter–Chambon criterion at the gel point is obeyed by the unfilled and by the non-modified sepiolite-filled epoxy matrix with either of the two hardeners. However, physical gels are formed in the presenc…

Behaviour of modified and unmodified polybutadienes in the semidilute regime

1997

Abstract The association behaviour of polybutadiene modified with 4-phenyl-l,2,4-triazoline-3,5-dione was studied in semidilute solution through static (SLS) and dynamic light scattering (DLS). The results were compared with the unmodified polybutadiene, whose behavior in semidilute solution was also studied as function of the molecular weight. At higher concentrations a small-angle excess scattering in SLS and a slow mode motion in DLS were observed both for modified and unmodified polybutadienes suggesting the presence of large clusters. Increasing the polymer concentration, the mass fraction of the slow motion increases up to values near 1, indicating a proximity to the gel point. For po…

(1-Adamantyl)methyl glycidyl ether: a versatile building block for living polymerization.

2014

(1-Adamantyl)methyl glycidyl ether (AdaGE) is introduced as a versatile monomer for oxyanionic polymerization, enabling controlled incorporation of adamantyl moieties in aliphatic polyethers. Via copolymerization with ethoxyethyl glycidyl ether (EEGE) and subsequent cleavage of the acetal protection groups of EEGE, hydrophilic linear polyglycerols with an adjustable amount of pendant adamantyl moieties are obtained. The adamantyl unit permits control over thermal properties and solubility profile of these polymers (LCST). Additionally, AdaGE is utilized as a termination agent in carbanionic polymerization, affording adamantyl-terminated polymers. Using these structures as macroinitiators fo…