Search results for "plastic"
showing 10 items of 7296 documents
EVA copolymer based nanocomposites: rheological behavior under shear and isothermal and non-isothermal elongational flow
2006
Abstract Nanocomposites are a very promising new class of polymer composites that exhibit an interesting combination of chemical, physical and mechanical properties. Only small amounts of nanofiller are sufficient to generate great variation of many properties. This work focuses on the rheological properties of poly[ethylene- co -(vinyl acetate)] (EVA copolymer) based nanocomposites in shear and in isothermal and non-isothermal elongational flow. The nanocomposites, at two different filler contents, were prepared in two different extruders and intercalates were obtained for all the samples. The twin-screw compounder is more efficient. The change of rheological properties, both in shear and …
Recycling and Thermomechanical Degradation of LDPE/Modified Clay Nanocomposites
2013
The special features of polymer nanocomposites are continually gaining interest both in academia and in industry. The latter is especially experiencing an increase in interest towards this class of polymer composites, and this is leading to the first concerns about their reprocessing and reciclability. Here, a systematic study on the behavior of LDPE/Cloisite 15A systems upon reprocessing in a single-screw extruder is described, focusing on rheological, mechanical, and morphological properties changes. The investigated systems show a very complex thermomechanical degradation behavior, with the degradation of the clay modifier and different degradation paths involving the polymer matrix; all…
Modeling and stress-strain characteristics of the mechanical properties of carbon-nanotube-reinforced poly(vinyl acetate) nanocomposites
2011
Polymer/carbon nanotube (CNT) composites are one of the most perspective advanced materials developed in recent years. The properties of CNT-reinforced polymer composites, however, strongly depend on structural aspects of the nanostructured filler and on its dispersion quality in a polymer matrix. Consequently, this research was devoted to the investigation of multiwalled-CNT-modified poly(vinyl acetate) (PVAc) composites with respect to the mechanical property dependence on some structural characteristics of CNTs. PVAc/CNT nanocomposites were obtained with a solution casting technique. The amount of CNTs was changed from 0.01 up to 2 wt %. The stress–strain characteristics of PVAc/CNT nano…
On the interlayer spacing collapse of Cloisite (R) 30B organoclay
2011
Abstract When used as a nanofiller for the preparation of polymer/clay nanocomposites (PCNs), Cloisite® 30B (30B) often undergoes a d-spacing collapse, as demonstrated by a shift to wider angles of the XRD basal reflection. Such collapse has been variously attributed to organoclay contamination or, more often, to thermal degradation of the organic modifier with expulsion of the volatile products from the galleries. In this work, several PCNs loaded with 30B have been prepared by melt compounding, using different polymer matrices, and have subsequently been subjected to dissolution in appropriate solvents followed by precipitation in excess non-solvent and room temperature drying. An XRD ana…
Effect of an organoclay on the photochemical transformations of a PBAT/PLA blend and morpho-chemical features of crosslinked networks
2021
Abstract In this work, we report the effect of an organoclay on the photochemical weathering of nanocomposites based on a poly(butylene adipate-co-terephthalate) (PBAT)/poly(lactic acid) (PLA) blend. The evolution of physicochemical properties was monitored by integrating spectroscopic, mechanical, and morphological analyses. A robust relationship was found between the molecular transformations of the polymer macromolecules and the morpho-mechanical properties of irradiated films. Moreover, the analysis of insoluble fractions extracted from nanocomposites pointed out that free-standing, porous structures, displaying an unprecedented thickness as great as 100 µm, were formed, thus unambiguou…
Compatibilization of polyethylene/polyamide 6 blend nanocomposite films
2015
Polymer blends of incompatible components need to undergo compatibilization, in order to give rise to a blend with good physical properties. At the same way, polymer/clay nanocomposites show this problem because of different chemical nature of the polymer matrix and of the clay. Compatibilization is therefore more necessary if an incompatible polymer blend is filled with an organomodified clay in order to give a final material with good properties. In this work, a polyethylene/polyamide 6 blend filled with an organomodified clay has been compatibilized with a maleic anhydride grafted SEBS (styrene-ethylene-butylene-styrene) copolymer and a glicidylmethacrylate-ethylene copolymer. The result…
Functional Opals from Reactive Polymers: Complex Structures, Sensors, and Modified Photoluminescence
2007
This paper describes the synthesis and properties of functional opal structures, so-called colloidal photonic crystals (CPCs), from a variety of reactive polymers. Photoprocessable opals are presented as well as opals with incorporated smart defect layers that can be actively addressed by external stimuli. In addition, opals with functional bio-macromolecular defects have been developed. They present a new class of materials for optical biomonitoring through shifts of the induced photonic defect mode. Strong modification of photoluminescence according to the photonic bandstructure is observed from opals with embedded exclusively luminescent defect layer.
Methylcellulose-Based Edible Films and Coatings: 2. Mechanical and Thermal Properties as a Function of Plasticizer Content
1997
Several edible films based on methylcellulose and polyethylene glycol 400 (PEG400) were prepared and stored until equilibration at different relative humidities. Tensile stress−strain curves show very different behaviors as a function of PEG400 and relative humidity. Tensile strength strongly depends on relative humidity and then on water content, more than on PEG400 content. On the contrary, elongation is dependent both on water and PEG400. These differences correspond to the glass transition of the polymer, which affects the elongation more than the tensile strength. However, from DSC measurements, it appears that the PEG400 has no or a very low compatibility with the methylcellulose matr…
Microbiological and ageing performance of polyhydroxyalkanoate-based multilayer structures of interest in food packaging
2014
Polyhydroxyalkanoates undergo crystallization during film processing and storage. In this paper, the physico–chemical ageing properties of multilayer structures based on a commercial polyhydroxybutyrate (PHB) and a polyhydroxybutyrate-co-valerate copolymer with 3% valerate content (PHBV3), containing a nanostructured zein interlayer, were analysed. The microbiological safety of the films was also evaluated by monitoring the growth of an inoculum of Listeria monocytogenes over time. Polyethyleneglycol (PEG) was added to PHBV3 films to facilitate handling as the PHBV3 mutlilayer systems (without plasticizer) cracked during film-formation. Crystallinity, thermal, mechanical, barrier and optica…
Cooperative self-assembling in statistical copolymers: a new approach to high-temperature thermoplastic elastomers
1994
Based on previous work, where it was shown that 4-urazoylbenzoic acid (U4A) groups, which are attached statistically to polybutadiene, form ordered supramolecular arrays in the unpolar polymer matrix, the present work describes the synthesis of a new molecular building block capable of self-assembling in the unpolar polymer matrix. 5-Urazoylisophthalic acid (U35A) groups attached to 1,4-polybutadiene chains cause the formation of a thermoplastic elastomer of improved properties. The clusters of functional groups show an endothermic transition. The melting temperature increases for low levels of modification from 130°C up to 190°C. The mechanical properties (stress–strain and dynamic mechani…