Search results for "plastics"
showing 10 items of 2724 documents
Recent Progress in the Development of Composite Membranes Based on Polybenzimidazole for High Temperature Proton Exchange Membrane (PEM) Fuel Cell Ap…
2020
[EN] The rapid increasing of the population in combination with the emergence of new energy-consuming technologies has risen worldwide total energy consumption towards unprecedent values. Furthermore, fossil fuel reserves are running out very quickly and the polluting greenhouse gases emitted during their utilization need to be reduced. In this scenario, a few alternative energy sources have been proposed and, among these, proton exchange membrane (PEM) fuel cells are promising. Recently, polybenzimidazole-based polymers, featuring high chemical and thermal stability, in combination with fillers that can regulate the proton mobility, have attracted tremendous attention for their roles as PE…
Structure and dynamics of polyethylene/clay films
2006
The relationships between structure and rheology of polyethylene/clay hybrid composite blown films were investigated through rheological tests both in shear and elongational flow. Two polymer matrices (low density polyethylene, LDPE and linear low density polyethylene, LLDPE) with different relaxation kinetics were used. Independently from the matrix, morphological analyses (TEM, XRD, and SEM) indicate that the hybrid structures are similarly constituted of delaminated platelets or tactoids having a relevant degree of orientation along the draw direction. This strongly affects the rheological behavior of materials. However, despite the similarities emerged from morphological analyses, both …
Proton conductivity through polybenzimidazole composite membranes containing silica nanofiber mats
2019
The quest for sustainable and more efficient energy-converting devices has been the focus of researchers&prime
Online measurement of floc size, viscosity, and consistency of cellulose microfibril suspensions with optical coherence tomography
2021
AbstractIn this study, cellulose microfibril (CMF) suspensions were imaged during pipe flow at consistencies of 0.4%, 1.0%, and 1.6% with optical coherence tomography (OCT) to obtain images of the structure and the local velocity of the suspension. The viscosities obtained by combining pressure loss measurement with the OCT velocity data showed typical shear thinning behavior and were in excellent agreement with viscosities obtained with ultrasound velocity profiling. The structural OCT images were used to calculate the radial and the axial floc sizes of the suspension. A fit of power law to the geometrical floc size–shear stress data gave the same power law index for all consistencies, sug…
Shear-Thinning in Oligomer Melts—Molecular Origins and Applications
2021
We investigate the molecular origin of shear-thinning in melts of flexible, semiflexible and rigid oligomers with coarse-grained simulations of a sheared melt. Entanglements, alignment, stretching and tumbling modes or suppression of the latter all contribute to understanding how macroscopic flow properties emerge from the molecular level. In particular, we identify the rise and decline of entanglements with increasing chain stiffness as the major cause for the non-monotonic behaviour of the viscosity in equilibrium and at low shear rates, even for rather small oligomeric systems. At higher shear rates, chains align and disentangle, contributing to shear-thinning. By performing simulations …
Influence of a Crosslinker Containing an Azo Group on the Actuation Properties of a Photoactuating LCE System
2016
Photoactuating liquid crystalline elastomers (LCE) are promising candidates for an application as artificial muscles in microdevices. In this work, we demonstrate that by optimizing (1) the illumination conditions and (2) the mixture of azo monomer and azo crosslinker, thick films of an all-azo LCE can be prepared, which show a strong length change without bending during photoactuation. This becomes possible by working with white light (about 440 nm), whose absorption is low, leading to a large penetration depth. By adding an azo crosslinker to a previously prepared system, several improvements of the actuation properties—like a stronger photoactuation at lower operational temperatures—coul…
ePTFE functionalization for medical applications
2021
Abstract Polytetrafluoroethylene (PTFE) is a ubiquitous material used in implants and medical devices in general due to its high biocompatibility and inertness; blood vessels, heart, jawbone, nose, eyes, or abdominal wall can benefit from its properties in the case of disease or injury. Its expanded version, ePTFE, is an improved version of PTFE with better mechanical properties, which extend its medical applications. However, ePTFE implants often lack improvement in properties such as antibacterial, antistenosis, or tissue integration properties. Improvements in these properties by several strategies of functionalization for medical purposes are discussed in this review. Covalent and non-c…
Pillar[5]arene-Diketopyrrolopyrrole Fluorescent Copolymer: A Promising Recognition and Adsorption Material for Adiponitrile by Selective Formation of…
2017
Conjugated pillar[5]arene-diketopyrrolopyrrole copolymer (P1) is synthesized by the copolymerization of a difunctionalized pillar[5]arene and a diketopyrrolopyrrole-based monomer, which shows large extinction coefficients (1.1 × 104 m-1 cm-1 ) at 519 nm and strong emission at 587 nm. P1 exhibits very strong host-guest binding affinity towards adiponitrile but low binding affinity towards 1,4-dihalobutane and 1,4-bis(imidazol-1-yl)butane. Such an enhanced selectivity is first found in the polypseudorotaxane between pillararene and neutral guests in organic solution and is successfully used for the recognition and adsorption of adiponitrile by the formation of a P1-adiponitrile polypseudorota…
Cellulose-inorganic hybrids of strongly reduced thermal conductivity
2022
Abstract The employment of atomic layer deposition and spin coating techniques for preparing inorganic-organic hybrid multilayer structures of alternating ZnO-CNC layers was explored in this study. Helium ion microscopy and X-ray reflectivity showed the superlattice formation for the nanolaminate structures and atomic force microscopy established the efficient control of the CNCs surface coverage on the Al-doped ΖnO by manipulating the concentration of the spin coating solution. Thickness characterization of the hybrid structures was performed via both ellipsometry and X-ray reflectivity and the thermal conductivity was examined by time domain thermoreflectance technique. It appears that ev…
Effect of different matrices and nanofillers on the rheological behavior of polymer-clay nanocomposites
2009
In this work, a comprehensive study of the rheological behavior under shear and isothermal and nonisothermal elongational flow of low density polyethylene (LDPE) and ethylene-vinyl acetate copolymer (EVA) based nanocomposites was reported to evaluate their "filmability", that is, the ability of these material to be processed for film forming applications. The influence of two different kinds of organoclay - namely Cloisite 15A and Cloisite 30B - and their concentration was evaluated. The presence of filler clearly affects the rheological behavior in oscillatory state of polyolefin-based nanocomposites but the increase of complex viscosity and the shear thinning are not dramatic. A larger st…