Search results for "plastics"
showing 10 items of 2724 documents
Injection molding of syndiotactic polystyrene/clay nanocomposites
2006
This study aims at exploring the effect of a commercial organoclay montmorillonite (MMT) on the final properties of syndiotactic polystyrene (sPS) injection-molded samples. To this goal, injection-molded specimens made from neat sPS and commercial MMT modified with various organic compounds were prepared in different molding conditions. Dispersion of clay was attained via melt blending, directly in the injection chamber of the injection-molding machine. The obtained specimens were analyzed by IR spectroscopy, X-ray diffraction, thermogravimetry, and differential thermal analysis, with the aim of elucidating the effect of clay on the microstructures of the samples. Results clearly show that,…
One-pot synthesis of PbS NP/sulfur-oleylamine copolymer nanocomposites via the copolymerization of elemental sulfur with oleylamine
2014
A novel synthetic and processing strategy for converting elemental sulfur into polymeric and nanocomposite materials is reported. We describe a facile one-pot reaction using elemental sulfur and oleylamine as comonomers to prepare high sulfur content copolymers and lead sulfide nanoparticle (PbS NP) nanocomposites. This process enables the preparation of solution processable copolymers and nanocomposites, where the loading and dispersion of PbS NP inclusions could be precisely controlled. We demonstrate the dual roles of oleylamine with sulfur for both the copolymerization of sulfur copolymers as well as the in situ synthesis of PbS NPs in a one-pot fashion.
Polyamide/carbonaceous particles nanocomposites fibers: Morphology and performances
2015
In this work, the influence of carbonaceous particles with different sizes and shapes on the morphology and mechanical performances of polyamide (PA)-based fibers was investigated. Graphene nanoplatelets (GNP) are compared with spherical and rod-like carbon fillers such as carbon black (CB) and multiwall carbon nanotubes (CNTs). The increments of the complex viscosity as well as elastic and loss moduli, in the melt state, assessed by rheological analysis, are reduced by modifying polyamide (PA) matrix with nanofillers in a following order: CNTs > GNP > CB. All the nanocomposites, however, show viscosity and moduli higher than those of neat PA. The CB loading causes a mere increase of the vi…
Mechanical properties and water vapor permeability of starch/montmorillonite nanocomposites
2009
Results of an investigation into an unmodified-montmorillonite (MMT)-filled nanocomposite based on plasticized starch are reported. Data on the influence of MMT content on the tensile mechanical properties of the material are presented. Particular attention is given to the water vapor permeability of the nanocomposite. It is found that the resistance to water permeation of plasticized starch can be improved considerably by introducing a rather small amount of the filler into it. Data on the influence of MMT content on the coefficients of moisture diffusion, solubility, and permeability are reported. Also, a simple method for determining the effect of irregularly oriented platelike filler pa…
Modeling of creep for multiwall carbon nanotube/epoxy nanocomposite
2013
The effect of multiwall carbon nanotubes (MWCNTs) on creep of epoxy matrix was evaluated on the basis of short-term creep-recovery tests performed at different stresses and temperatures. Six different compositions of MWCNT and bisphenol A epoxy resin (0-3.8 wt % of MWCNTs) were investigated. Slight reduction of creep compliance, strain rate, and residual strain were revealed experimentally for nanocomposite comparing to the neat resin. The development of viscoelastic strain for creep stage was described by the use of time-temperature-strain superposition principle with the parameters obtained from the approximation of recovery stage using modified Schapery model. The model accounted for the…
On the role of multi-functional polyhedral oligomeric silsesquioxane in polystyrene-zinc oxide nanocomposites
2014
Abstract Multi-functional trisilanol phenyl (TSPH) and trisilanol isobutyl (TSIB) polyhedral oligomeric silsesquioxane (POSS) have been used in the formulation of advanced polystyrene (PS)-zinc oxide (ZnO) nanocomposites. The neat matrix and PS/ZnO-based nanocomposites have been characterized through rheological, morphological, mechanical, and dynamic thermo-mechanical analysis. Both TSPH and TSIB are able to improve the dispersion of ZnO into the polystyrene matrix; furthermore, adding TSIB leads to better results because it facilitates better solubility into the PS matrix and interaction/reaction with the ZnO nanopowder. Finally, the optical properties and photo-oxidative resistance of th…
Moisture effect on deformability of epoxy/montmorillonite nanocomposite
2010
In this article the moisture effect on deformability of epoxy/montmorillonite nanocomposite was investigated. The change of fracture character and drop of elastic characteristics due to moisture absorption was observed. The estimation of filler morphological peculiarities (platelet stack constitution) in composite and its effect on nanocomposite elastic properties was undertaken. It is shown that the higher number of filler platelet per stack consistently leads to the decrease of nanocomposite elastic properties. Nevertheless prediction by micromechanical model is rough for moistened nanocomposite because of resin structural changes. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
Intercalation effects in LDPE/o-Montmorillonites nanocomposites
2007
Abstract Typical montmorillonite clays (Cloisite ® Na + , Cloisite ® 30B) were modified by treatment with octadecyl ammonium chloride (ODC) and successive additions of octadecylamine (ODA). XRD analyses of the modified clays indicated an increase of the basal spacing of the (0 0 1) planes depending on the ODC or ODA additions. Nanocomposites were prepared by dispersing the modified clays (3% w/w concentration) in LDPE, using a Brabender mixer. XRD measurements of the obtained products indicated in some cases the achievement of intercalation effects, which were confirmed by TEM analysis. Some thermal, mechanical, dynamic-mechanical and rheological properties were evaluated and correlated to …
Synthesis of Functional Block Copolymers Carrying One Poly(p-phenylenevinylene) and One Nonconjugated Block in a Facile One-Pot Procedure
2016
Block copolymers composed of a MEH–PPV block and a nonconjugated functional block (molecular weights between 5 and 90 kg/mol) were synthesized in a facile one-pot procedure via ROMP. This one-pot procedure permits the synthesis of numerous block copolymers with little effort. Amphiphilic block copolymers were obtained via incorporation of oxanorbornene carrying a PEG side chain as well as via postpolymerization modification of a reactive ester carrying norbornene derivative with methoxypoly(ethylene glycol)amine. These amphiphilic block copolymers can be self-assembled into micelles exhibiting different sizes (60–95 nm), morphologies (micelles or fused, caterpillar-like micelles), and optic…
Water transport in epoxy/MWCNT composites
2013
Moisture and water uptake of epoxy/multi-wall carbon nanotube (MWCNT) composites was studied in a wide range of atmosphere relative humidity and temperatures. Addition of up to 1 wt.% of MWCNTs into the neat epoxy resulted to the twofold decrease of the diffusivity, while the levels of moisture/water uptake remained unchanged. The positive effect on the reduction of the diffusion coefficient diminishes with the increase of temperature. Differences in the water transport properties and plasticization ability of the neat polymer and its nanocomposites are explained by the free volume considerations and the polymer–water interactions, which are verified by the results of thermomechanical analy…