Search results for "plastics"
showing 10 items of 2724 documents
Effect of random copolymer additives on the interfacial tension between incompatible polymers
1998
Interfacial tensions γ were measured for mixtures of poly(methylphenylsiloxane) (4 kg/mol) and poly(dimethylsiloxane) (24 kg/mol) in the absence and in the presence of small amounts of the random copolymer poly(dimethylsiloxane-ran-methylphenylsiloxane) (89 mol-% of dimethylsiloxane units, 28 kg/mol) from 25 to 110°C. Approximately 1 wt.-% of the copolymer additive suffices to reduce γ from ca. 2.2 to 1.6 mN/m. The time dependence of the apparent γ value in the course of the attainment of equilibria also indicates surface acivity. The hypothesis is formulated that the efficiency of the random copolymer for a reduction of γ is bound to the condition that it is only sparingly soluble in both …
Solution Properties of Polysarcosine: From Absolute and Relative Molar Mass Determinations to Complement Activation
2018
Polysarcosine (pSar) was one of the first polymers synthesized in a controlled living manner, but it was only recently when it was reconsidered as a promising alternative for poly(ethylene glycol) (PEG) in biomedical applications. Despite receiving more and more attention, very little is known about the solution properties of pSar, such as coil dimensions and thermodynamic interactions. In this article, we report on these properties of pSar with degrees of polymerization 50 < X-n < 400 that were prepared by controlled living ring-opening polymerization. The polymers are characterized by gel permeation chromatography (GPC), MALDI-TOF mass spectrometry, dynamic and static light scattering (SL…
Tunable dynamic hydrophobic attachment of guest molecules in amphiphilic core–shell polymers
2016
In this study, synthesis and dynamic properties of amphiphilic core–shell polymers are reported as monitored through their interaction with small amphiphilic molecules. Brush-like structures are formed with a hydrophobic core surrounded by a hydrophilic shell utilizing controlled radical addition–fragmentation chain transfer (RAFT) polymerization of macromonomers consisting of linear polyglycerol chains attached to alkylene methacrylate. Continuous wave electron paramagnetic resonance (CW EPR) spectroscopy is employed to study how the amphiphilic, paramagnetic spin probe 16-DSA (16-doxyl stearic acid) interacts with polymers of different alkylene chain lengths in their hydrophobic cores and…
The role of additives in the recycling of polymers
1998
The main problems in post-consumer plastics recycling are due to the degradation undergone by the polymers during processing steps and by the products during their lifetime and, for heterogeneous recycling, to the incompatibility of different polymers. To reduce the negative effects of the recycling steps, two main ways can be adopted for homogeneous materials: restabilization during the recycling to avoid or at least to slow the degradation and addition of fillers and modifiers capable of improving the performance of thermoplastic polymers without increasing the final cost of the secondary material. In the case of mixed plastics, compatibilization is the necessary step to obtain secondary …
Living Polymer Chains with Predictable Molecular Weight and Dispersity via Carbanionic Polymerization in Continuous Flow: Mixing Rate as a Key Parame…
2016
Aiming at systematic variation of the parameter dispersity, Đ (or “polydispersity”), living polymers with predictable dispersity (Đ = 1.15–2.20) and controlled molecular weights (Mn = 3200–18 500 g mol–1) were prepared via carbanionic polymerization. The approach relies on a continuous flow reactor equipped with a tangential four-way jet micromixing device. By varying the total flow rate, the mixing efficiency of the initiator (sec-BuLi) and the corresponding vinyl monomers is controlled, resulting in polymers with predefined dispersity, while the number-average molecular weight, Mn, is kept constant. In this manner living polystyrene (PS), poly(p-methylstyrene) (PpMeS), and poly(2-vinylpyr…
Polydispersity and Molecular Weight Distribution of Hyperbranched Graft Copolymers via “Hypergrafting” of ABm Monomers from Polydisperse Macroinitiat…
2013
The hypergrafting strategy designates the synthesis of hyperbranched graft copolymers (HGCs) in a grafting-from approach, using ABm monomers, from multifunctional, polydisperse macroinitiator cores by slow monomer addition. Hypergrafting leads to complex polymer topologies with defined molecular weight, degree of branching (DB), and polydispersity (PD). By a generating function formalism, a generally applicable equation for the PD of HGCs (PD = PDf + (m – 1)/f) is derived, where PDf is the polydispersity of the core and f its average functionality. In addition, the complete molecular weight distribution function has been calculated for varied m and f as well as for a given distribution of i…
Nanoscale Blends between Immiscible Polymers via Simultaneous Non-Interfering Polymerisation
2005
An important topic in polymer science seeks to improve the performances of polymer blends using nanoscale phase segregation. Here, blends between polystyrene and polycaprolactone are realised by a chemical route. The non-interfering character of the radical polymerisation of styrene and the lanthanide halide initiated ring-opening polymerisation of caprolactone is assessed. The molecular weights range from 2 000 to 3 500 for polycaprolactone and up to 140 000 for polystyrene, with reasonable polydispersity indexes. From calorimetry measurements, it is shown that polystyrene and low molecular weight polycaprolactone are immiscible. The morphology of the blends between the two immiscible poly…
Block Copolymers Build-up of Electron and Hole Transport Materials
2004
In this article we describe the synthesis of various monomers modified with triphenyl-1,3,5-triazine side groups as electron transport moieties. By nitroxide-mediated polymerization with a TEMPO unimer it was possible to obtain polymers with a narrow polydispersity. Furthermore, by living radical polymerization block copolymers were obtained from these monomers. Therefore, microphase separated structures are accessible which possess hole conducting moieties in one phase and electron conducting moieties in the other phase.
Functional Diblock Copolymers for the Integration of Triboluminescent Materials into Polymer Matrices
2008
This work describes the synthesis and use of new diblock copolymers to integrate functional inorganic particles into a polymer matrix. These diblock copolymers were synthesized by nitroxide-mediated polymerization (NMP) from styrene and two styrene-like monomers with protected functional groups for the later connection to the functional inorganic material. It was possible to keep the polydispersity of the block copolymers around or below 1.2 and to preset the length of the functional block to about 20 monomers or 10 mol-% of monomers. The groups for the surface functionalization (amino groups or chelating ligands) were obtained in their free form by polymer analogous reactions. As an exampl…
Correlation between polymer architecture, mesoscale structure and photovoltaic performance in side-chain-modified poly(p-arylene-ethynylene)-alt-poly…
2011
Abstract Recent investigations have shown that an anthracene containing poly( p -arylene-ethynylene)-alt-poly( p -arylene-vinylene) statistical copolymer consisting of a well defined conjugated backbone, along which linear and branched alkoxy side chains are attached in a random manner, yields, compared to its counterparts with regular side chain substitution, an improved performance in polymer [6,6]:-phenyl-C 61 -butyric acid methyl ester (PCBM) bulk-heterojunction solar cells. The microscopic origin for the improved power conversion efficiency ( η ≈ 3.8%) of the statistical copolymer – which is the best in its material class – has not been resolved. We conducted grazing incidence wide-an…