Search results for "polyether"
showing 10 items of 22 documents
From an epoxide monomer toolkit to functional PEG copolymers with adjustable LCST behavior.
2011
The lower critical solution temperature (LCST) behavior of novel poly(ethylene glycol) (PEG)-based copolymers bearing multiple functional groups, obtained by anionic ring-opening (co)polymerization (AROP), has been investigated. Variable comonomer ratios of ethylene oxide (EO) and the corresponding oxiranes isopropylidene glyceryl glycidyl ether (IGG), ethoxyl vinyl glycidyl ether (EVGE), allyl glycidyl ether (AGE), or N,N-dibenzyl amino glycidyl (DBAG), particularly designed to implement functional groups at the PEG backbone, were found to influence the LCST behavior. Sharp transitions from translucent to opaque solutions, comparable to other well-established stimuli-responsive polymers, w…
Preparation and determination of the structure of high-performance polymer blends by small-angle neutron scattering
1995
Amorphous blends from a deuterated polyaryletherketone and a polyetherimide have been prepared and investigated by neutron scattering. The used components differ remarkably in their structure antheir solution properties. The blends on the other hand are combinatorial mixtures : the scattering quantity Φ 1 Φ 2 /S(q) is independent of the composition of the blends if the polymer chains have the same length
Synthesis, Structural Analysis, Fiber Formation and Preliminary Anticancer Characterization of the Organotin Polyether from Dibutyltin Dichloride and…
2012
The organotin polyether derived from reaction of dibutyltin dichloride and 2,5-dimethyl-3-hexyne-2,5-diol was rapidly synthesized employing classical interfacial polymerization in 65% yield and a chain length of 360 units. IR results are consistent with the polyether structure. Bands characteristic of the formation of the Sn-O are present and bands characteristic of the Sn-Cl are absent. F MALDI MS results in the low mass range gives ion fragment clusters to five units. Isotopic abundance matches for tin are consistent with its presence in these ion fragment clusters. In the high mass range ion fragment clusters to greater than 300 units are found. The products offer outstanding inhibition …
High performance composites containing perfluoropolyethers-functionalized carbon-based nanoparticles: Rheological behavior and wettability
2016
Abstract Ultra High Molecular Weight Polyethylene (UHMWPE) based composites filled with carbon nanotubes (CNTs) and carbon black (CB) modified by perfluoropolyethers (PFPE) have been formulated. All composites show a segregated morphology with nanofillers selectively localized at the polymer particle–particle interface. The composites rheological properties have been deeply investigated: the PFPE functionalities linked on CNTs facilitate the semi-3D nanofillers network formation in the composites that show a solid-like behaviour even at lower investigated filler contents, reaching the rheological percolation threshold at lower nanofiller content than bare CNTs filled composites. For composi…
Modelling IR Spectra of Sulfonated Polyether Ether Ketone (SPEEK) Membranes for Fuel Cells
2020
Authors acknowledge support from LSC project No 2014/666 ERDF and students ( ) support from project 2DP/2.1.1.1.0/14/APIA/VIAA/009.
Proton Conducting Electrospun Sulfonated Polyether Ether Ketone-Graphene Oxide Composite Membranes
2017
[EN] A series of novel composite membranes, based on sulfonated poly(ether ketone) (SPEEK) with a graphene oxide (GO) layer, were prepared. One contained a GO layer sandwiched between the SPEEK-polyvinyl alcohol (PVA) matrix (SPEEK/PVA@GO), and another deposited thin layers of GO on the nanofibers of SPEEK-polyvinyl butyral (PVB), with both sandwiched in the phase matrix of SPEEK-PVA (SPEEK/PVA@GO-NF). Various nanofiber thicknesses were studied by varying the electrospinning time. The prepared composite membranes with different nanofiber thicknesses were characterized by scanning electron microscopy, water uptake, ionic exchange capacity, thermogravimetric analysis, mechanical properties an…
The structure of high-performance polymer blends by small-angle neutron scattering
1997
Abstract Amorphous blends from a deuterated polyaryletherketone and a polyetherimide have been prepared and investigated by small-angle neutron scattering (SANS). The blends are combinatorial mixtures: the scattering quantity Φ1Φ2/S(q) is independant of the composition of the blends.
Laser densification of organic coating: Effects of laser wavelength, operating parameters and substrate properties
2012
International audience; Mechanical bonding and interface behaviour play a key role for any materials deposited on different substrates. Usually, a post-spray heat treatment is required to improve the coating morphology and to enhance mechanical properties of thermal-sprayed polymeric coating. The effects of YAG, CO2 and diode laser radiations on as-sprayed PEEK coating deposited on stainless steel and aluminum substrates were investigated. The results revealed a good coating densification and interface behavior. A correlation between coating and substrate absorption coefficients, their thermophysical properties and laser operating parameters was shown. Besides, the finite element modeling b…
New Electroactive Polymers with Electronically Isolated 4,7-Diarylfluorene Chromophores as Positive Charge Transporting Layer Materials for OLEDs
2021
The OLED materials were developed in the frame of project funded by the Research Council of Lithuania (grant No. S-LLT-19-2). B.Z. is thankful to the National Natural Science Foundation of China (No. 51773195), and the Research & Development Projects in Key Areas of Guangdong Province, China (No. 2019B010933001). We are also obliged to D. Volyniuk for measurements of the ionization potentials.
The effect of immersion disinfection procedures on dimensional stability of two elastomeric impression materials
2008
The aim of this study was to determine the effect of immersion disinfection procedures on the dimensional stability of two elastomeric impression materials. Impressions of a stainless steel die were made with polyether (PE) and with additionpolymerized silicone rubber (PVS). The test specimens underwent disinfection treatment by immersion in two commercially available solutions containing quaternary ammonium compounds (Sterigum Powder, SP) and glutaraldehyde plus an amino derivative (MD520, MD), respectively. The impressions were measured at 4 different time points: before any disinfection treatment (T0); after the first disinfection (T1); 6 hours after the first disinfection (T2); after th…