Search results for "polymers"
showing 10 items of 3567 documents
Cobalt hexacyanoferrate–poly(methyl methacrylate) composite: Synthesis and characterization
2010
Abstract The preparation of cobalt hexacyanoferrate nanoparticles–poly(methyl methacrylate) (CoHCF–PMMA) composites are described together with their characterization and thermochromic properties. CoHCF nanoparticles – investigated by dynamic light scattering – were prepared by optimizing solvent composition and temperature to obtain nanoparticles with a reduced degree of aggregation. The nanoparticles were embedded in a PMMA matrix to obtain a transparent coloured composite which was studied by transmission electron microscopy. The nanoparticle chromic features, enhanced by their reduced sizes, were investigated by UV–vis and FT-IR spectroscopy.
Miscibility of Blends of Biodegradable Polymers and Copolymers with Different Plasticizers
2008
Miscibility between components of different plasticizer(A)/solvent(B)/biodegradable polymer(C) ternary systems with H-bonding has been compared. Systems were formed by two H-donor phenolic plasticizers, 4-nonylphenol (NP) and 4:4'-dihydroxydiphenylmethane (BPF); an H-acceptor solvent, epichlorohydrin (ECH); and H-acceptor poly(3-hydroxybutyrate) (PHB) or poly[(3-hydroxybutyrate)-co-(3-hydroxyvalerate)] (PHBHV) copolymers. Blend miscibility is the result of the balance of three competitive H-bondings: plasticizer self-association (AA), plasticizer-solvent (AB) and plasticizer-polymer (AC) interassociations. The strength and extent of such specific interactions have been experimentally monito…
Ionic Liquid Composite Polybenzimidazol Membranes for High Temperature PEMFC Applications
2019
A series of proton exchange membranes based on polybenzimidazole (PBI) were prepared using the low cost ionic liquids (ILs) derived from 1-butyl-3-methylimidazolium (BMIM) bearing different anions as conductive fillers in the polymeric matrix with the aim of enhancing the proton conductivity of PBI membranes. The composite membranes prepared by casting method (containing 5 wt. % of IL) exhibited good thermal, dimensional, mechanical, and oxidative stability for fuel cell applications. The effects of anion, temperature on the proton conductivity of phosphoric acid-doped membranes were systematically investigated by electrochemical impedance spectroscopy. The PBI composite membranes containin…
Protection of high-density polyethylene-silicon composites from ultraviolet-visible photodegradation
2017
[EN] The extent of the ultraviolet¿visible (UV¿vis) photoirradiation effect on high-density polyethylene (HDPE) and HDPE¿sili-con (Si) composites is reported in terms of the addition of Si microparticles at contents of 0.1, 1, and 5 wt %. A standard acceleratedUV-vis exposure was applied over 2750 h, corresponding to 22 months in Florida. Thermogravimetry, differential scanning calorimetry,and Fourier transform infrared spectroscopy were used as reliable techniques for monitoring the quality of the HDPE-Si composites. Theincreasing addition of Si microparticles delayed the photodegradation of the HDPE¿Si composites. Because of their strong light-scattering effects, Si microparticles blocked…
Novel silver-based nanoclay as an antimicrobial in polylactic acid food packaging coatings.
2010
This paper presents a comprehensive performance study of polylactic acid (PLA) biocomposites, obtained by solvent casting, containing a novel silver-based antimicrobial layered silicate additive for use in active food packaging applications. The silver-based nanoclay showed strong antimicrobial activity against Gram-negative Salmonella spp. Despite the fact that no exfoliation of the silver-based nanoclay in PLA was observed, as suggested by transmission electron microscopy (TEM) and wide angle X-ray scattering (WAXS) experiments, the additive dispersed nicely throughout the PLA matrix to a nanoscale, yielding nanobiocomposites. The films were highly transparent with enhanced water barrier …
Development of polymeric functionally graded scaffolds: a brief review.
2016
Over recent years, there has been a growing interest in multilayer scaffolds fabrication approaches. In fact, functionally graded scaffolds (FGSs) provide biological and mechanical functions potentially similar to those of native tissues. Based on the final application of the scaffold, there are different properties (physical, mechanical, biochemical, etc.) which need to gradually change in space. Therefore, a number of different technologies have been investigated, and often combined, to customize each region of the scaffolds as much as possible, aiming at achieving the best regenerative performance. In general, FGSs can be categorized as bilayered or multilayered, depending on the number…
Controlling the mode of operation of organic transistors through side chain engineering
2016
Electrolyte-gated organic transistors offer low bias operation facilitated by direct contact of the transistor channel with an electrolyte. Their operation mode is generally defined by the dimensionality of charge transport, where a field-effect transistor allows for electrostatic charge accumulation at the electrolyte/semiconductor interface, whereas an organic electrochemical transistor (OECT) facilitates penetration of ions into the bulk of the channel, considered a slow process, leading to volumetric doping and electronic transport. Conducting polymer OECTs allow for fast switching and high currents through incorporation of excess, hygroscopic ionic phases, but operate in depletion mode…
Durability of biodegradable polymers for the conservation of cultural heritage
2019
The use of polymers for conservation of cultural heritage is related to the possibility to slow down or stop natural deterioration which, in many cases, corresponds to stopping the entrance of liquid water and to favour spontaneous water vapour removal. Unfortunately, hydrophobicity is generally favoured by surface roughness and thus competitive with transparency. It is therefore important to find an optimal balance hydrophobicity, transparency and durability (especially to photooxidation). However, polymers typically used for applications in this field come from non-renewable resources and are not biodegradable. In this work, the mechanical, structural and optical properties of PLA, PBAT a…
Amorphous and crystalline polyetheretherketone: Mechanical properties and tissue reactions during a 3-year follow-up.
2007
The study was aimed to test the mechanical strength, structural stability, and tissue reactions of optically amorphous and crystalline polyetheretherketone (PEEK) plates during a 3-year follow-up in vivo and in vitro. The injection-moulded PEEK plates were implanted to the dorsal subcutis of 12 sheep, which were sacrificed at 6-156 weeks. Thereafter, the plates were subjected to tensile tests, and levels of crystallinity were assessed by differential scanning calorimetry (DSC). Histological evaluation was carried out using the paraffin technique. In vitro properties were examined with the tensile test and DSC at 0-156 weeks. Tissue reactions were mild and fairly similar for the amorphous an…
Microstructure-oxidation resistance relationship in Ti3AlC2 MAX phase
2020
International audience; Spark Plasma Sintering and Hot Isostatic Pressing were used to synthesize coarse-grained and fine-grained Ti3AlC2 specimens. Moreover, Spark Plasma Sintering processing parameters were modified in order to vary the TiC, Al2O3 and TixAly impurity and the porosity contents in the fine-grained samples. The influence of the Ti3AlC2 microstructure on the oxidation resistance was assesed. It is demonstrated that the grain size can drastically modify the oxidation resistance. The higher density of grain boundaries, in fine-grained specimens, increases the number of Al diffusion paths and leads to the formation of a protective alumina scale. In coarse-grained sample, Al diff…