Search results for "polytetrafluoroethylene"
showing 10 items of 32 documents
Ultrasonic Welding of PBT-GF30 (70% Polybutylene Terephthalate + 30% Fiber Glass) and Expanded Polytetrafluoroethylene (e-PTFE)
2021
The ultrasonic welding of polymeric materials is one of the methods often used in practice. However, each couple of material subjected to ultrasonic welding is characterized by different values of technological parameters. Therefore, the main objective of the research presented in this paper is to optimize the parameters for the ultrasonic welding of two materials, namely PBT-GF30 (70% polybutylene terephthalate + 30% fiber glass) and expanded polytetrafluoroethylene (e-PTFE). In this sense, the research was carried out considering a plate-type part made of PBT-GF30, which had a thickness of 2.1 mm, and a membrane-type part made of e-PTFE, with a thickness of 0.3 mm. The condition imposed o…
Wet Chemistry and Peptide Immobilization on Polytetrafluoroethylene for Improved Cell-adhesion
2016
Endowing materials surface with cell-adhesive properties is a common strategy in biomaterial research and tissue engineering. This is particularly interesting for already approved polymers that have a long standing use in medicine because these materials are well characterized and legal issues associated with the introduction of newly synthesized polymers may be avoided. Polytetrafluoroethylene (PTFE) is one of the most frequently employed materials for the manufacturing of vascular grafts but the polymer lacks cell adhesion promoting features. Endothelialization, i.e., complete coverage of the grafts inner surface with a confluent layer of endothelial cells is regarded key to optimal perfo…
Immediate Implant Placement in Fresh Mandibular Molar Extraction Socket: 8-Year Results. A Case Report
2010
Abstract Recently, successful implant placement in fresh extraction sockets has been reported. In this case report, we present the results of an immediate implant placement in a fresh extraction socket of a mandibular molar with simultaneous bone regeneration using a nonresorbable membrane and no other graft materials. Clinical and radiographic findings acquired 8 years after implant placement demonstrated a stable peri-implant situation and confirmed a satisfactory treatment result.
PTFE mesh in renal allograft compartment syndrome.
2006
We report a case of anuria in a 42-year-old female kidney transplant patient that occurred secondary to extrinsic compression from a large kidney being placed extraperitoneally in a small iliac fossa. Prompt reexploration in the immediate postoperative period resulted in salvage of the graft with restoration of kidney function. The abdominal wall was reconstructed using prosthetic mesh, which decreased the compartment pressure within the iliac fossa sufficiently to allow the renal vein patency and the kidney perfusion. We think that this tension-free surgical technique should be applied in those cases in which the retroperitoneal space is less than the size of the kidney to avoid renal allo…
Alveolar bone preservation in extraction sockets using non-resorbable dPTFE membranes: a retrospective non-randomized study.
2008
Background: The aim of this study was to investigate the clinical regeneration of extraction sockets using high-density polytetrafluoroethylene (dPTFE) membranes without the use of a graft material. Methods: A total of 276 extraction sockets were evaluated in 276 subjects (151 males and 125 females; mean age, 50.2 years; age range: 24 to 73 years). After extraction, flaps were elevated and a dPTFE membrane was placed over the extraction site. The flaps were repositioned and sutured into place. Primary closure was not obtained over the membranes. The cemento-enamel junctions of the adjacent teeth were used as reference points. Measurements were taken postextraction and 12 months after surger…
Mesh or no mesh: a hamletic dilemma to prevent Renal Allograft Compartment Syndrome (RACS)
2014
Tension-free muscle closure is essential in kidney transplantation, both in adult and pediatric patients. Tight muscle closure may lead to renal allograft compartment syndrome either due to compression of the renal parenchyma or due to kinking of the renal vessels. It may also cause kinking of the transplant kidney ureter, wound dehiscence and incisional hernia. Many techniques have been proposed in an attempt to achieve tension-free closure. There is a wrong belief among surgeons that using prosthetic mesh may increase the incidence of infective complications in these immunosuppressed patients. Also, there is fear that one is not able to monitor the renal graft by ultrasound and perform bi…
Calcium sulfate and PTFE nonporous barrier for regeneration of experimental bone defects
2008
Made available in DSpace on 2022-04-28T18:55:46Z (GMT). No. of bitstreams: 0 Previous issue date: 2008-06-01 The aim of the study was to evaluate the possibility to obtain guided bone regeneration with two types of physical barriers (calcium sulfate and PTFE nonporous barrier) in surgical defects created in rat parietal bones. In the right parietal bone the calcium sulfate barrier filled out the whole defect and in the left parietal bone the barrier of PTFE was positioned in the floor and externally to the surgical defect. After 7, 14, 30 and 45 days four animals were sacrificed in each period and the bone containing the defects were submitted to the microscopic analysis. The results of the…
Tailoring Novel PTFE Surface Properties: Promoting Cell Adhesion and Antifouling Properties via a Wet Chemical Approach
2016
Many biomaterials used for tissue engineering applications lack cell-adhesiveness and, in addition, are prone to nonspecific adsorption of proteins. This is especially important for blood-contacting devices such as vascular grafts and valves where appropriate surface properties should inhibit the initial attachment of platelets and promote endothelial cell colonization. As a consequence, the long-term outcome of the implants would be improved and the need for anticoagulation therapy could be reduced or even abolished. Polytetrafluoroethylene (PTFE), a frequently used polymer for various medical applications, was wet-chemically activated and subsequently modified by grafting the endothelial …
Evanescent wave-initiated photopolymerisation as a new way to create monolithic open-tubular capillary columns: use as enzymatic microreactor for on-…
2010
Evanescent wave-initiated photopolymerisation in an optically wave guiding PTFE-coated fused silica capillary using light-emitting diode as a light source, is established here as a way to fabricate monolithic porous layer open-tubular capillary columns with a potential in capillary separation methods; application of the obtained open-tubular columns as enzymatic microreactors for on-line protein digestion is demonstrated.
Indoor and outdoor determination of pesticides in air by ion mobility spectrometry.
2016
Abstract The use of ion mobility spectrometry (IMS) has been evaluated as analytical methodology to detect and evaluate the occupational exposure to pesticides. The developed IMS methodology was used, in positive and negative modes, to determine the presence of pesticides in air and to evaluate possible inhalation exposures of workers and users based on active sampling on Teflon membranes and direct thermal desorption IMS. The negative IMS mode was used to determine bensulfuron, clorpyrifos, diniconazole, diuron, flutolanil and imidacloprid, while the positive mode was employed to evaluate formetanate, metalaxyl, metamitrone, metribuzin, paclobutrazol and pirimicarb. The IMS measurements pr…