Search results for "propagating"

In-situ time resolved X-ray diffraction study of the formation of the nanocrystalline NbAl3 phase by mechanically activated self-propagating high-tem…

1999

The mechanically activated self-propagating high-temperature synthesis (MASHS) technique was used to produce a NbAl3 intermetallic compound. This process results from the combination of two steps: a mechanical activation of the Nb 3Al powder mixture which is followed by a self-propagating high-temperature synthesis (SHS) reaction, induced by the exothermal character of the reaction Nb3Al. An original experiment was designed to study in-situ the formation of the NbAl3 phase in the combustion front: time-resolved X-ray diffraction coupled with an infrared imaging technique and a thermocouple measurement were performed to monitor the structural and thermal evolution during the SHS reaction. Ow…

Mechanically Activated Self-Propagating High Temperature Synthesis (MASHS) Applied to the MoSi<sub>2</sub> and FeSi<sub>2</sub&g…

1999

Synthesis of niobium aluminides using mechanically activated self-propagating high-temperature synthesis and mechanically activated annealing process

1999

The mechanically activated self-propagating high-temperature synthesis (MASHS) technique and the mechanically activated annealing process (M2AP) were used to produce NbAl3 intermetallic compound. The MASHS process results from the combination of two steps: first, a mechanical activation of the Nb 3Al powders mixture; second, a self-propagating high-temperature synthesis (SHS). The M2AP process also results from the combination of two steps: the first is the same; the second consists of the annealing of as-milled powders. Based on X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and X-ray energy dispersive spectroscopy (EDXS), the as-milled powders, MASHS, and M2AP end-pr…

Spark plasma synthesis from mechanically activated powders: a versatile route for producing dense nanostructured iron aluminides

2004

Abstract The possibility of mechanically activated spark plasma sintering (MASPS) to perform simultaneously within a very short period of time the synthesis and the consolidation of nanophase iron aluminide from mechanically activated powders of Fe and Al in two different ratio (Fe53 at.% and Fe60 at.%) were confirmed in this work.

Polarization modulation instability in a Manakov fiber system

2015

International audience; The Manakov model is the simplest multicomponent model of nonlinear wave theory: It describes elementary stable soliton propagation and multisoliton solutions, and it applies to nonlinear optics, hydrodynamics, and Bose-Einstein condensates. It is also of fundamental interest as an asymptotic model in the context of the widely used wavelength-division-multiplexed optical fiber transmission systems. However, although its physical relevance was confirmed by the experimental observation of Manakov (vector) solitons in a planar waveguide in 1996, there have in fact been no quantitative experiments confirming its validity for nonlinear dynamics other than soliton formatio…

Crack dynamics and crack surfaces in elastic beam lattices

1998

The dynamics of propagating cracks is analyzed in elastic two-dimensional lattices of beams. At early times, inertia effects and static stress enhancement combine so that the crack-tip velocity is found to behave as t1/7. At late times a minimal crack-tip model reproduces the numerical simulation results. With no disorder and for fast loading, a “mirror-mist-mirror” crack-surface pattern emerges. Introduction of disorder leads, however, to the formation of the “mirror-mist-hackle”–type interface typical in many experimental situations. Peer reviewed

Roughening of a propagating planar crack front

2000

A numerical model of the front of a planar crack propagating between two connected elastic plates is investigated. The plates are modeled as square lattices of elastic beams. The plates are connected by similar but breakable beams with a randomly varying stiffness. The crack is driven by pulling both plates at one end in Mode I at a constant rate. We find $\ensuremath{\zeta}=1/3, z=4/3,$ and $\ensuremath{\beta}=1/4$ for the roughness, dynamical, and growth exponents, respectively, that describe the front behavior. This is similar to continuum limit analyses based on a perturbative stress-intensity treatment of the front [H. Gao and J. R. Rice, J. Appl. Mech. 56, 828 (1989)]. We discuss the …

Counter-propagating difference frequency mixing in diamond with terahertz waves

2013

We investigate four-wave mixing between terahertz and optical pulses in diamond. We observe the occurrence of sum and difference frequency generation, with the latter being phase-matched for terahertz pulses counter-propagating to the optical field.

Assisted self-sustaining combustion reaction in the Fe–Si system: Mechanical and chemical activation

2007

Abstract This work presents original investigations carried out to improve the activated self-propagating high-temperature synthesis (SHS) process in the Fe–Si system: different ignition modes are tested (volume heating as opposed to a local ignition source), and the use of additive is considered in order to enhance the SHS type reactivity in the Fe–Si system. When 20 wt.% of KNO 3 is added to the reactive mixture, the fast (>20 mm s −1 ), stable and self-sustaining combustion reaction produces a very fine FeSi + α-FeSi 2 structure. Infrared thermography (IR) as well as post-mortem analysis (SEM, EDXS, XRD) was used to understand the mechanism behind the chemical activation process when KNO…

Microstructural study of titanium carbonitride elaborated by combustion synthesis

2007

Abstract The self-propagating high-temperature synthesis (S.H.S.) process, which is promising for the fabrication of ceramic materials, was chosen to elaborate titanium carbonitride materials. The influence of parameters such as nitrogen gas pressure and carbon ratio on the microstructure was studied. A single phase product of Ti(C,N) is obtained for a carbon ratio under 15 at.% and a nitrogen pressure of 36 MPa. The increase of the carbon ratio corresponds to a decrease of the maximum temperature reached during the synthesis. Time resolved X-ray diffraction measurements (TRXRD) with the synchrotron radiation were used to determine the reaction mechanisms. We could observe that the synthesi…