Search results for "regeneration"
showing 10 items of 889 documents
Influence of polymer content in Ca-deficient hydroxyapatite–polycaprolactone nanocomposites on the formation of microvessel-like structures
2009
Calcium phosphate (CaP) ceramics are widely used in bone tissue engineering due to their good osteoconductivity. The mechanical properties of CaP can be modified by the addition of small volume fractions of biodegradable polymers such as polycaprolactone (PCL). Nevertheless, it is also important to evaluate how the polymer content influences cell-material or cell-cell interactions because of potential consequences for bone regeneration and vascularization. In this study we assessed the general biocompatibilty of Ca-deficient hydroxyapatite (CDHA)-PCL disks containing nominally 11 and 24% polycaprolactone using human umbilical vein endothelial cells and human primary osteoblasts. Confocal mi…
Mesenchymal stem cell proliferation and differentiation on load-bearing trabecular Nitinol scaffolds.
2013
Bone tissue regeneration in load-bearing regions of the body requires high-strength porous scaffolds capable of supporting angiogenesis and osteogenesis. 70% porous Nitinol (NiTi) scaffolds with a regular 3-D architecture resembling trabecular bone were produced from Ni foams using an original reactive vapor infiltration technique. The "trabecular Nitinol" scaffolds possessed a high compressive strength of 79 MPa and high permeability of 6.9×10(-6) cm2. The scaffolds were further modified to produce a near Ni-free surface layer and evaluated in terms of Ni ion release and human mesenchymal stem cell (hMSC) proliferation (AlamarBlue), differentiation (alkaline phosphatase activity, ALP) and …
ePTFE ‐based biomedical devices: An overview of surgical efficiency
2021
International audience; Polytetrafluoroethylene (PTFE) is a ubiquitous material used for implants and medical devices in general because of its high biocompatibility and inertness: blood vessel, heart, table jawbone, nose, eyes, or abdominal wall can benefit from its properties in case of disease or injury. Its expanded version, ePTFE is an improved version of PTFE with better mechanical properties, which extends its medical applications. A material as frequently used as ePTFE with these exceptional properties deserves a review of its main uses, developments, and possibility of improvements. In this systematic review, we examined clinical trials related to ePTFE-based medical devices from t…
Construction and evaluation of sponge scaffolds from hyaluronic acid derivatives for potential cartilage regeneration
2020
A two or one pot synthesis has been used for the reaction of hyaluronic acid (HA) with octadecylamine (C-18) and hydrazine (Hy). In both cases, the chemical derivatization involved primary hydroxyl groups of hyaluronic acid and not its carboxyl groups, whose presence is important for receptor interaction. In this way, Hy-HA-C-18 derivatives have been obtained with appropriate hydrophobic and hydrophilic character. Their ability to form homogeneous physical hydrogels has been evaluated as well as the possibility to obtain porous sponges through salt leaching technology. Sponges showing the highest porosity, potentially compatible with cell entrapment, have been characterized with regard to t…
Preparation of three-layered porous PLA/PEG scaffold: relationship between morphology, mechanical behavior and cell permeability.
2015
Interface tissue engineering (ITE) is used to repair or regenerate interface living tissue such as for instance bone and cartilage. This kind of tissues present natural different properties from a biological and mechanical point of view. With the aim to imitating the natural gradient occurring in the bone-cartilage tissue, several technologies and methods have been proposed over recent years in order to develop polymeric functionally graded scaffolds (FGS). In this study three-layered scaffolds with a pore size gradient were developed by melt mixing polylactic acid (PLA) and two water-soluble porogen agents: sodium chloride (NaCl) and polyethylene glycol (PEG). Pore dimensions were controll…
Characterization and osteogenic activity of a silicatein/biosilica-coated chitosan-graft-polycaprolactone.
2014
Several attempts have been made in the past to fabricate hybrid materials that display the complementary properties of the polyester polycaprolactone (PCL) and the polysaccharide chitosan (CHS) for application in the field of bone regeneration and tissue engineering. However, such composites generally have no osteogenic activity per se. Here we report the synthesis of a chitosan-graft-polycaprolactone (CHS-g-PCL) and its subsequent characterization, including crystallinity, chemical structure and thermal stability. Upon surface-functionalization of CHS-g-PCL with osteogenic biosilica via the surface-immobilized enzyme silicatein, protein adsorption, surface morphology and wettability were a…
Histological and histomorphometrical analysis of a silica matrix embedded nanocrystalline hydroxyapatite bone substitute using the subcutaneous impla…
2010
The clinical suitability of a bone substitute material is determined by the ability to induce a tissue reaction specific to its composition. The aim of this in vivo study was to analyze the tissue reaction to a silica matrix-embedded, nanocrystalline hydroxyapatite bone substitute. The subcutaneous implantation model in Wistar rats was chosen to assess the effect of silica degradation on the vascularization of the biomaterial and its biodegradation within a time period of 6 months. Already at day 10 after implantation, histomorphometrical analysis showed that the vascularization of the implantation bed reached its peak value compared to all other time points. Both vessel density and vascula…
Burner backflow reduction in regeneration furnace
2011
In the present case from the steel industry, waste hydrochloric acid from the pickling process is regenerated using spray roasting. The process is driven by four burners placed symmetrically along the periphery of the cylindrical main section of the reactor. Severe problems with gas backflow and sintering of iron oxide inside the burner chamber have led to a complete shut down of the process 1-2 times every week, which is a frequency which significantly affects the productivity. In this study the influence of a kick-out on the gas flow in the vicinity of the burner chamber is investigated numerically. It is shown that the kick-out geometry creates a vortical low pressure region preventing t…
Effect of hydroxyapatite concentration and size on morpho-mechanical properties of PLA-based randomly oriented and aligned electrospun nanofibrous ma…
2019
The growing demand for nanofibrous biocomposites able to provide peculiar properties requires systematic investigations of processing-structure-property relationships. Understanding the morpho-mechanical properties of an electrospun scaffold as a function of the filler features and mat microstructure can aid in designing these systems. In this work, the reinforcing effect of micrometric and nanometric hydroxyapatite particles in polylactic acid-based electrospun scaffold presenting random and aligned fibers orientation, was evaluated. The particles incorporation was investigated trough Fourier transform infrared spectroscopy in attenuated total reflectance. The morphology of the nanofibers …
Bioengineering of the silica-polymerizing enzyme silicatein-alpha for a targeted application to hydroxyapatite.
2009
Since its discovery, numerous biotechnological approaches have aimed to explore the silica-polymerizing catalytic activity of the enzyme silicatein. In vivo, silicatein catalyzes polymerization of amorphous silica nanospheres from soluble precursors. In vitro, it directs the formation of nanostructured biosilica. This is of interest for various applications that strive to benefit from both the advantages of the biological system (i.e., silica synthesis under physiological conditions) and the cell mineralization-stimulating effect of biosilica. However, so far immobilization of silicatein has been hampered by the complex multistep procedure required. In addition, the chemical surface modific…