Search results for "rfa"

showing 10 items of 11106 documents

The effects of microwave radiation generated by mobile phones on the tear film

2021

Abstract Electromagnetic radiation (ER) emitted by mobile phones and other modern devices has potentially harmful effects on ocular tissue. Their effects on the eye surface and tear film are little known so far. The aim of this paper was to investigate the effects of ER emitted by the phone mobile on the tear film. For this study, we selected a total of 50 subjects, young, healthy, without chronic treatment, who are not contact lens wearers and who have no history of ophthalmic surgery. Schirmer I test, tear pH and tear ferning test (TFT) were performed on all subjects before (“-pre”) being exposed to ER emitted by the mobile phone and after (“-post”) exposure for 5 minutes, the pH and TFT …

ocular surfacebusiness.industryRelectromagnetic radiationdry eye diseaseeye diseases03 medical and health sciences0302 clinical medicine030220 oncology & carcinogenesis030221 ophthalmology & optometryMedicineOptoelectronicsMedicinesense organsbusinessMicrowavetear filmtRevista Romana de Medicina de Laborator
researchProduct

Increasing Yield and Antioxidative Performance of Litchi Pericarp Procyanidins in Baked Food by Ultrasound-Assisted Extraction Coupled with Enzymatic…

2018

Extraction with organic solvents is a traditional method to isolate bioactive compounds, which is energy-wasting and time-consuming. Therefore, enzyme and ultrasound treatments were combined to assist the extraction of oligomeric procyanidins from litchi pericarp (LPOPC), as an innovative approach to replace conventional extraction methods. Under optimum conditions (enzyme concentration 0.12 mg/mL, ultrasonic power 300 W, ultrasonic time 80 min, and liquid/solid ratio 10 mL/g), the yield of LPOPC could be improved up to 13.5%. HPLC analysis indicated that the oligomeric procyanidins (OPC) content of LPOPC from proposed extraction was up to 89.6%, mainly including (&minus

oligomeric procyanidinsPharmaceutical Sciencelitchi pericarpChemical FractionationHigh-performance liquid chromatographyPeroxideAntioxidantsArticleAnalytical Chemistrylcsh:QD241-441Lipid peroxidationchemistry.chemical_compound0404 agricultural biotechnologylcsh:Organic chemistryLitchiDrug DiscoveryRSM (Response Surface Methodology)Physical and Theoretical ChemistryChromatography High Pressure LiquidAnalysis of VarianceChromatographyMolecular StructurePlant ExtractsOrganic ChemistryExtraction (chemistry)04 agricultural and veterinary sciences040401 food sciencebaked foodMonomerProanthocyanidinchemistryUltrasonic WavesChemistry (miscellaneous)Yield (chemistry)Molecular MedicineHPLCProcyanidin A1Molecules
researchProduct

Critical issues and future prospects of the secondary substation in smart grid context

2014

This paper is focused on the new role of the secondary substation in the smart grids context. This innovative view has been proposed and developed in the framework of two Research Projects: NewCabELARC Project and Reipersei Project. The latter provides a concrete and comprehensive low cost solutions for the smart grid monitoring and control, allowing the real diffusion and integration of Distributed Generation and the full exploitation of Renewable Energy Sources. In this field, this paper shows how the secondary substation (SS) takes the role of smart transducer node where innovative devices can be located, collecting the measurement data coming from the field devices (power and energy met…

optic fiberEngineeringbusiness.industryNode (networking)Interface (computing)Electrical engineeringContext (language use)Smart gridSettore ING-IND/32 - Convertitori Macchine E Azionamenti ElettriciSmart transducerGridlaw.inventionSmart griddistribution networkslawDistributed generationpower line communication (PLC)Smart grids; secondary substation; power line communication (PLC); optic fiber; distribution networksSystems engineeringsecondary substationbusinessSettore ING-INF/07 - Misure Elettriche E ElettronicheRemote control2014 AEIT Annual Conference - From Research to Industry: The Need for a More Effective Technology Transfer (AEIT)
researchProduct

Optical Absorption of Excimer Laser‐Induced Dichlorine Monoxide in Silica Glass and Excitation of Singlet Oxygen Luminescence by Energy Transfer from…

2021

An optical absorption (OA) band of interstitial dichlorine monoxide molecules with peak at 4.7 eV and halfwidth 0.94 eV is identified in F2 laser - irradiated (photon energy=7.9 eV) synthetic silica glass bearing both interstitial O2 and Cl2 molecules. Alongside with intrinsic defects, this OA band can contribute to solarization of silica glasses produced from SiCl4. While the formation of ClClO is confirmed by its Raman signature, its structural isomer ClOCl may also contribute to this induced OA band. Thermal destruction of this band between 300C and 400C almost completely restores the pre-irradiation concentration of interstitial Cl2. An additional weak OA band at 3.5 eV is tentatively a…

optical absorptionMaterials scienceInfraredinterstitial chlorinemedicine.medical_treatmentFOS: Physical sciencesPhoton energyPhotochemistrysinglet oxygenchemistry.chemical_compoundsymbols.namesakesilica glassMaterials ChemistrymedicineElectrical and Electronic Engineering[PHYS]Physics [physics]Condensed Matter - Materials ScienceExcimer laserSinglet oxygenMaterials Science (cond-mat.mtrl-sci)Surfaces and InterfacesCondensed Matter PhysicsSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsDichlorine monoxidechemistryglass nanovoidssymbolschlorine oxidesluminescenceactivationAbsorption (chemistry)Raman spectroscopyLuminescence
researchProduct

Photoluminescence time decay of surface oxygen deficient centers in un‐doped and Ge‐doped silica

2005

We report a study of the emission decay from the singlet excited state of two fold coordinated Si and Ge centers stabilized on the surface of silica and Ge-doped silica. The PL lifetimes are of the order of nanoseconds and increase on decreasing the temperature. The results suggest that, for the surface centers, the phonon assisted intersystem-crossing process linking the excited states affects the decay rates, is effective down to low temperatures and is distributed because of the inhomogeneity of the defects. (© 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

optical fiberSurface oxygenPhotoluminescenceradiation effectChemistryPhononDopingTime decayAnalytical chemistryNanosecondExcited stateradiation-induced attenuationSinglet stateAtomic physicsphysica status solidi (c)
researchProduct

Near‐IR Radiation‐Induced Attenuation of Aluminosilicate Optical Fibers

2021

The X-ray radiation-induced attenuation (RIA) growth kinetics are studied online in different single-mode aluminosilicate optical fibers in the near-IR (NIR) domain to evaluate their potential in terms of dosimetry. The optical fibers differ by Al contents, core sizes, drawing parameters, and also by a preform deposition process. The data show no dependence of the RIA on all these parameters, a positive result for the design of point or distributed radiation detectors exploiting RIA to monitor the dose. The RIA growth rate is unchanged for dose rates changing from 0.073 to 6.25 Gy(SiO2) s−1, and the RIA linearly increases with the dose up to 2 kGy(SiO2). Small but noticeable RIA changes are…

optical fibersMaterials scienceOptical fiberRadiation induced02 engineering and technology01 natural scienceslaw.inventionX-ray irradiations[SPI]Engineering Sciences [physics]020210 optoelectronics & photonicsAluminosilicatelaw0103 physical sciences0202 electrical engineering electronic engineering information engineeringMaterials Chemistryradiation-induced attenuationElectrical and Electronic EngineeringComposite materialComputingMilieux_MISCELLANEOUS010308 nuclear & particles physicsAttenuationSurfaces and InterfacesCondensed Matter PhysicsSurfaces Coatings and FilmsElectronic Optical and Magnetic Materialsaluminosilicate glassesradiation effectsphysica status solidi (a)
researchProduct

Silver Sulfide Nanoclusters and the Superatom Model

2015

The superatom model of electron-shell closings has been widely used to explain the stability of noble-metal nanoclusters of few nanometers, including thiolate-protected Au and Ag nanoclusters. The presence of core sulfur atoms in silver sulfide (Ag–S) nanoclusters renders them a class of clusters with distinctive properties as compared to typical noble-metal clusters. Here, it is natural to ask whether the superatom model is still applicable for the Ag–S nanoclusters with mixed metal and nonmetal core atoms. To address this question, we applied density functional simulations to analyze a series of Ag–S nanoclusters: Ag14S(SPh)12(PPh3)8, Ag14(SC6H3F2)12(PPh3)8, Ag70S16(SPh)34(PhCO2)4(triphos…

optical propertiesElectron densitySilver sulfideInorganic chemistryNanoclusterschemistry.chemical_compoundAtomic orbitalNonmetalCluster (physics)Physical and Theoretical Chemistryta116electromagnetic wave absorptionconduction bandsatomsta114ChemistrySuperatomprecious metalsmolecular orbitalsTriphosSurfaces Coatings and FilmsElectronic Optical and Magnetic Materialsenergy gapCrystallographyGeneral Energysulfurlight absorptionThe Journal of Physical Chemistry C
researchProduct

Mechanical and optical properties of as-grown and thermally annealed titanium dioxide from titanium tetrachloride and water by atomic layer deposition

2021

Funding Information: This work was carried out within the MECHALD project funded by Business Finland (Tekes) and is linked to the Finnish Centers of Excellence in Atomic Layer Deposition (ref. 251220) and Nuclear and Accelerator Based Physics (refs. 213503 and 251353) of the Academy of Finland. Funding Information: This work was carried out within the MECHALD project funded by Business Finland (Tekes) and is linked to the Finnish Centers of Excellence in Atomic Layer Deposition (ref. 251220 ) and Nuclear and Accelerator Based Physics (refs. 213503 and 251353 ) of the Academy of Finland. Publisher Copyright: © 2021 The use of thin-films made by atomic layer deposition (ALD) is increasing in …

optical propertiesMaterials scienceAnnealing (metallurgy)elastic modulusresidual stress02 engineering and technologyoptiset ominaisuudet01 natural sciencesStress (mechanics)Atomic layer depositionResidual stressTiO0103 physical sciencesMaterials ChemistryTiO2Composite materialThin filmElastic modulus010302 applied physicsMetals and AlloysSurfaces and Interfacesatomikerroskasvatus021001 nanoscience & nanotechnologyhardnessSurfaces Coatings and FilmsElectronic Optical and Magnetic Materialsfysikaaliset ominaisuudetAtomic Layer DepositionALDatomic layer depositionohutkalvot0210 nano-technologytitaanidioksidiRefractive indexLayer (electronics)
researchProduct

Synergistic photo-release of drugs by non-linear excitation

2014

ABSTRACTNanomaterials engineered in novel multi-modular systems in which every component works in a synergistic way with others could potentially lead to a completely new type of tools for nanomedicine. The development of nanostructures able to release drugs directly within the target after a stimulus can drastically improve the therapeutics efficiency by reducing side effects. Gold nanoparticles offer one of the most suitable platforms for the development of modular nano-devices. On the one hand, their surface properties enable effective coating by peptides containing at least one cysteine, thus yielding stable and non-cytotoxic systems. On the other, their intriguing photophysics, charact…

optical propertiesMaterials sciencenanostructureConjugated systemengineering.materialNanomaterialsCoatingColloidal goldCovalent bondmedicineBiophysicsengineeringAuNanomedicineAu; nanostructure; optical propertiesDoxorubicinSurface plasmon resonancemedicine.drug
researchProduct

Atomic layer deposition of AlN from AlCl3 using NH3 and Ar/NH3 plasma

2018

The atomic layer deposition (ALD) of AlN from AlCl3 was investigated using a thermal process with NH3 and a plasma-enhanced (PE)ALD process with Ar/NH3 plasma. The growth was limited in the thermal process by the low reactivity of NH3, and impractically long pulses were required to reach saturation. Despite the plasma activation, the growth per cycle in the PEALD process was lower than that in the thermal process (0.4A ° vs 0.7A ° ). However, the plasma process resulted in a lower concentration of impurities in the films compared to the thermal process. Both the thermal and plasma processes yielded crystalline films; however, the degree of crystallinity was higher in the plasma process. The…

optical propertiescrystal structureMaterials scienceSiliconta221Analytical chemistrychemistry.chemical_element02 engineering and technologyoptiset ominaisuudet01 natural sciencespiezoelectric filmsAtomic layer depositionCrystallinityImpurity0103 physical sciencesWaferta216010302 applied physicsta114Plasma activationWide-bandgap semiconductorSurfaces and InterfacesPlasmaatomikerroskasvatus021001 nanoscience & nanotechnologyCondensed Matter PhysicsSurfaces Coatings and Filmsdermatologychemistryatomic layer deposition0210 nano-technologyJournal of Vacuum Science and Technology A
researchProduct