Search results for "scanning electron"
showing 10 items of 667 documents
Laser irradiation of carbon–tungsten materials
2014
Carbon–tungsten layers deposited on graphite by thermionic vacuum arc (TVA) were directly irradiated with a femtosecond terawatt laser. The morphological and structural changes produced in the irradiated area by different numbers of pulses were systematically explored, both along the spots and in their depths. Although micro-Raman and Synchrotron-x-ray diffraction investigations have shown no carbide formation, they have shown the unexpected presence of embedded nano-diamonds in the areas irradiated with high fluencies. Scanning electron microscopy images show a cumulative effect of the laser pulses on the morphology through the ablation process. The micro-Raman spatial mapping signalled an…
On the origin of the sigmoid shape in the UO2 oxidation weight gain curves
2009
International audience; Cracking and spalling are known to occur during the oxidation of UO2. However, these phenomena are not considered by the existing kinetic models of the oxidation of UO2 into U3O8. In this study the oxidation of UO2 samples of various sizes from the single crystal to nanopowders, has been followed by isothermal and isobaric thermogravimetry, environmental scanning electron microscopy and in situ X-ray diffraction at temperatures ranging from 250 to 370°C in air. It has been shown that cracking occurs once a critical layer thickness of intermediate oxide has been reached, which corresponds to the beginning of the sigmoid kinetic curve. Cracking contribution to the sigm…
A new route to grow oxide nanostructures based on metal displacement deposition. Lanthanides oxy/hydroxides growth
2012
Abstract A metal displacement reaction has been used in order to cause precipitation of oxide nanostructures within pores of anodic alumina membrane (AAM) templates. Here, we focus on the displacement deposition of LnO/OH (Ln = La, Ce, Sm, Er) nanostructures using Zn as sacrificial anode, employing a specific cell arrangement where a galvanic couple was formed between zinc anode and the Au thin layer covering template pore bottom. Progress of displacement deposition reaction into template channels was monitored measuring the open circuit potential as well as pH changes of the electrolyte. A progressive de-activation of the anode surface was observed for long deposition times, caused by depo…
Anodic oxide films on tungsten—II. The morphology and dissolution of the films
1980
Abstract Scanning electron microscopy was used to investigate the morphology of anodic oxide films on tungsten, obtained in various conditions of anodization. Studies were made of the growth of porous films, whose thickness increases with time and depends upon the current density. Temperature and electrolyte composition influence the film morphology. Gravimetric measurements of film dissolution at 70°C show that after a transient time, the rate of metal dissolution and that of film formation coincide. The porous films thicken because tungsten dissolves as WO 2 2+ and precipitates as WO 3 .H 2 O.
High temperature reactivity of nickel aluminide diffusion coatings
2008
Abstract The high-temperature oxidation behaviour of nickel aluminides has been studied at 900 °C in air under atmospheric pressure. Yttria doped and undoped specimens of nickel were aluminised and then oxidised for 100 h under isothermal and cycling conditions. The results showed that when yttria is added by metal-organic chemical vapour deposition technique prior to the aluminisation process, it increased the oxidation rate of aluminised nickel, but improved the oxide scale adherence under cyclic conditions. The effects of yttria on the scale morphology, oxidation behaviour and scale spallation tendency are discussed based on the experimental results, using X-ray diffraction (XRD), scanni…
Ordering of fluorite-type phases in erbium-doped oxyfluoride glass ceramics
2018
In this study, novel transparent Er3+ doped glass ceramics were prepared from melt-quenched oxyfluoride glasses with general composition of Na2O-NaF-BaF2-YbF3-Al2O3-SiO2. The crystallization of fluorite (BaF2, BaF2-YbF3, NaF-BaF2-YbF3 and Na0.5-xYb0.5+xF2+2x) and distorted fluorite (rhombohedral Ba4Yb3F17 and tetragonal NaF-BaF2-YbF3) phases was analysed in glass ceramics with different BaF2 and YbF3 ratio. The phase composition and microstructure were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Intense red upconversion luminescence (UCL) was detected under near-infrared excitation resulting from three photon upconversion followed by cross-relaxation betw…
Effect of cobalt doping on the mechanical properties of ZnO nanowires
2016
Abstract In this work, we investigate the influence of doping on the mechanical properties of ZnO nanowires (NWs) by comparing the mechanical properties of pure and Co-doped ZnO NWs grown in similar conditions and having the same crystallographic orientation [0001]. The mechanical characterization included three-point bending tests made with atomic force microscopy and cantilever beam bending tests performed inside scanning electron microscopy. It was found that the Young's modulus of ZnO NWs containing 5% of Co was approximately a third lower than that of the pure ZnO NWs. Bending strength values were comparable for both materials and in both cases were close to theoretical strength indica…
Mechanical properties of sol–gel derived SiO2 nanotubes
2014
The mechanical properties of thick-walled SiO2 nanotubes (NTs) prepared by a sol–gel method while using Ag nanowires (NWs) as templates were measured by using different methods. In situ scanning electron microscopy (SEM) cantilever beam bending tests were carried out by using a nanomanipulator equipped with a force sensor in order to investigate plasticity and flexural response of NTs. Nanoindentation and three point bending tests of NTs were performed by atomic force microscopy (AFM) under ambient conditions. Half-suspended and three-point bending tests were processed in the framework of linear elasticity theory. Finite element method simulations were used to extract Young’s modulus values…
Naphthalimide imidazolium-based supramolecular hydrogels as bioimaging and theranostic soft materials
2020
1,8-Naphthalimide-based imidazolium salts differing for the alkyl chain length and the nature of the anion were synthesized and characterized to obtain fluorescent probes for bioimaging applications. First, their self-assembly behavior and gelling ability were investigated in water and water/dimethyl sulfoxide binary mixtures. Only salts having longer alkyl chains were able to give supramolecular hydrogels, whose properties were investigated by using a combined approach of fluorescence, resonance light scattering, and rheology measurements. Morphological information was obtained by scanning electron microscopy. In addition, conductive properties of organic salts in solution and gel state we…
The preparation and thermal evolution of polymeric gels with garnet stoichiometry in the CaOAl2O3SiO2 and CaOCr2O3SiO2 systems
1990
Abstract The synthesis of gels with garnet stoichiometry in the CaOAl 2 O 3 SiO 2 and CaOCr 2 O 3 SiO 2 systems and their evolution in thermal processing have been studied. Dried gels with the stoichiometry 3CaO.Al 2 O 3 .3SiO 2 show a homogeneous aspect without detectable crystalline phase. The thermal evolution of these gels indicates no formation of grossularite at temperatures up to 1000°C after 12 h. In the uvarovite garnet samples, 3CaO.Cr 2 O 3 .3SiO 2 , a small amount of crystalline phase was detected in the dried gels. The homogeneity of the gels was checked by scanning electron microscropy. The infrared study of these polymeric gels confirmed the presence of SiOMe (MeCr 3+ …