Search results for "scanning electron"
showing 10 items of 667 documents
PLA graphene nanoplatelets nanocomposites: Physical properties and release kinetics of an antimicrobial agent
2017
Abstract Graphene nanoplatelets (GnP) as filler and ciprofloxacin (CFX) as biocide were incorporated via melt-compounding into poly(lactic acid) (PLA) to obtain biopolymer-based nanocomposites with antimicrobial properties. GnP were added with the aim of improving the mechanical properties of the antimicrobial system and tuning the drug release. The obtained systems were mechanically characterized in tensile mode by quasi-static and dynamic mechanical tests. Furthermore, rheological measurements were performed. The morphology of the samples was analyzed through scanning electron microscopy (SEM). Moreover, a mathematical model, i.e. power law model, was used to fit the release data in order…
Effect of Graphene Nanoplatelets on the Physical and Antimicrobial Properties of Biopolymer-Based Nanocomposites
2016
In this work, biopolymer-based nanocomposites with antimicrobial properties were prepared via melt-compounding. In particular, graphene nanoplatelets (GnPs) as fillers and an antibiotic, i.e., ciprofloxacin (CFX), as biocide were incorporated in a commercial biodegradable polymer blend of poly(lactic acid) (PLA) and a copolyester (BioFlex®). The prepared materials were characterized by scanning electron microscopy (SEM), and rheological and mechanical measurements. Moreover, the effect of GnPs on the antimicrobial properties and release kinetics of CFX was evaluated. The results indicated that the incorporation of GnPs increased the stiffness of the biopolymeric matrix and allowed for the t…
Temperature-induced microstructural changes in shells of laboratory-grown Arctica islandica (Bivalvia).
2021
Bivalve shells are increasingly used as archives for high-resolution paleoclimate analyses. However, there is still an urgent need for quantitative temperature proxies that work without knowledge of the water chemistry–as is required for δ18O-based paleothermometry–and can better withstand diagenetic overprint. Recently, microstructural properties have been identified as a potential candidate fulfilling these requirements. So far, only few different microstructure categories (nacreous, prismatic and crossed-lamellar) of some short-lived species have been studied in detail, and in all such studies, the size and/or shape of individual biomineral units was found to increase with water temperat…
Crystalline microstructure of boehmites studied by multi-peak analysis of powder X-ray diffraction patterns
2017
Nanocrystalline boehmite (gamma-aluminium-oxyhydroxide) is a material of industrial importance, the functionality of which follows from its crystalline microstructure. A procedure for preparing boehmite nanoparticles, comprising the formation of a precipitate by the alkalization of an aqueous solution of aluminium nitrate and subsequent hydrothermal aging, was previously elaborated. The application of an additive (maltitol or tartaric acid) to control the sizes and shapes of crystallites in the produced polycrystalline powder of boehmite was developed. The aim of this work is a study of the effect of the hydrothermal treatment time on nanocrystalline characteristics of boehmite, both in abs…
Scanning electron microscopy characterization of ZnSe single crystals grown by solid-phase recrystallization
2000
ZnSe single crystals were grown from n-type microcrystalline boules by a Solid Phase Recrystallization (SPR) method. The recrystallizations were performed under different atmospheres, Ar or Se, and pressures to investigate the influence of growth conditions on the structural features of the resulting crystals. The samples were mechanically and mechano-chemically polished in a bromine methanol solution and, then, etched in HCl for a short time, before characterization. The homogeneity and the nature of defects in the crystals were studied by Cathodoluminescence (CL) in the scanning electron microscope (SEM). CL measurements show the existence of slip bands in the recrystallized samples, like…
Cadmium clusters in CdI2layered crystals: the influence on the optical properties
2007
The influence of overstoichiometric Cd i atoms on the optical properties of cadmium iodide layered crystals has been investigated. The results of optical absorption, luminescence, and luminescence excitation studies of CdI 2 crystals with controlled deviation from stoichiometric composition allow observing correlations between the Cd i concentration and features in absorption and emission spectra up to concentrations of 10 18 cm -3 . At higher concentrations the overstoichiometric cadmium atoms form clusters, which were observed using scanning electron microscopy. The extinction spectra of (CdI i ) n clusters are calculated in the frame of Mie theory and are found to correlate with the opti…
Multianalytical Approach to explain the darkening process of hematite pigment in paintings from ancient Pompeii after accelerated weathering experime…
2013
[EN] In this paper, recently excavated fresco painting fragments from the House of Marcus Lucretius (Pompeii) and not exposed to the atmosphere since the eruption of the Mount Vesuvius were subjected to a controlled SO2 atmosphere and high relative humidity. These experiments were conducted in order to simulate under accelerated conditions the possible deterioration of the hematite pigment and plaster. The mineralogical transformation of the polychromy and plaster was monitored using mainly Raman spectroscopy, a non-destructive technique, but also infrared spectroscopy (FT-IR) and scanning electron microscopy energy-dispersive X-ray spectroscopy (SEM-EDS). After different exposure cycles to…
Crystallized nano-sized alpha-tricalcium phosphate from amorphous calcium phosphate: microstructure, cementation and cell response
2015
New insight on the conversion of amorphous calcium phosphate (ACP) to nano-sized alpha tricalcium phosphate (α-TCP) provides a faster pathway to calcium phosphate bone cements. In this work, synthesized ACP powders were treated with either water or ethanol, dried, crystallized between 700 and 800 °C, and then cooled at different cooling rates. Particle size was measured in a scanning electron microscope, but crystallite size calculated by Rietveld analysis. Phase composition and bonding in the crystallized powder was assessed by x-ray diffraction and Fourier-transform infrared spectroscopy. Results showed that 50 nm sized α-TCP formed after crystallization of lyophilized powders. Water trea…
Galvanic deposition and characterization of brushite/hydroxyapatite coatings on 316L stainless steel
2016
In this work, brushite and brushite/hydroxyapatite (BS, CaHPO4·H2O; HA, Ca10(PO4)6(OH)2) coatings were deposited on 316L stainless steel (316LSS) from a solution containing Ca(NO3)2·4H2O and NH4H2PO4 by a displacement reaction based on a galvanic contact, where zinc acts as sacrificial anode. Driving force for the cementation reaction arises from the difference in the electrochemical standard potentials of two different metallic materials (316LSS and Zn) immersed in an electrolyte, so forming a galvanic contact leading to the deposition of BS/HA on nobler metal. We found that temperature and deposition time affect coating features (morphology, structure, and composition). Deposits were char…
Going beyond histology. Synchrotron micro-computed tomography as a methodology for biological tissue characterization: from tissue morphology to indi…
2009
Current light microscopic methods such as serial sectioning, confocal microscopy or multiphoton microscopy are severely limited in their ability to analyse rather opaque biological structures in three dimensions, while electron optical methods offer either a good three-dimensional topographic visualization (scanning electron microscopy) or high-resolution imaging of very thin samples (transmission electron microscopy). However, sample preparation commonly results in a significant alteration and the destruction of the three-dimensional integrity of the specimen. Depending on the selected photon energy, the interaction between X-rays and biological matter provides semi-transparency of the spe…