Search results for "scanning"
showing 10 items of 1808 documents
XRMA analysis and X-ray diffraction analysis of dental enamel from human permanent teeth exposed to hydrogen peroxide of varying pH
2019
Background This in vitroinvestigation shows how 3.3% H2O2, at different pH-values affects the enamel. Material and Methods A number of fifteen human premolars were used. The enamel of the coronal half in six of the teeth, were exposed by H2O2. Nine teeth were prepared to enamel powder. The enamel was exposed to 3.3% H2O2, at six different pH-values (pH range 4.5 - 7.0). Analyses of the topography of enamel performed by scanning electron microscope (SEM) and the chemical composition of enamel by X-ray microanalysis (XRMA). X-ray powder diffraction (XRD) analysed the crystallinity in enamel powder. Results The exposure to H2O2 at pH5.5 resulted in a decrease of O in the exposed enamel, and ch…
Growth and characterisation of MnTe crystals
2001
We report on the low temperature growth of MnTe crystals by means of travelling solution methods. Two different processes are considered; a classical THM process using a low temperature presynthesised MnTe ingot, and a modified THM process, in which an increasing length of solvent zone collects the tellurium that was added to the stoichiometric charge to decrease the reaction temperature. Ingots from the two methods are analysed by means of scanning electron microscopy, X-ray diffractometry, resistivity, susceptibility and optical absorption measurements.
Studies on atomic layer deposition of IRMOF-8 thin films
2015
Deposition of IRMOF-8 thin films by atomic layer deposition was studied at 260–320 C. Zinc acetate and 2,6-naphthalenedicarboxylic acid were used as the precursors. The as-deposited amorphous films were crystallized in 70% relative humidity at room temperature resulting in an unknown phase with a large unit cell. An autoclave with dimethylformamide as the solvent was used to recrystallize the films into IRMOF-8 as confirmed by grazing incidence x-ray diffraction. The films were further characterized by high temperature x-ray diffraction (HTXRD), field emission scanning electron microscopy, Fourier transform infrared spectroscopy (FTIR), time-of-flight elastic recoil detection analysis (TOF-…
Optical and structural studies of GaN 3D structures selectively grown by MOCVD
2004
Abstract This paper presents preliminary results on the selective growth of three-dimensional (3D) micrometric metallic structures by the MOCVD technique. The 3D structure growth occurs by simply feeding the reactor gas phase with a conventional flow of metal-organic (MO), trimethyl-gallium (TMGa) molecules. Selectivity occurs at the substrate surface in which MO species travel tens of micrometers in order to build up the 3D structure. After the growth, these structures are nitrided in order to give GaN-related optical visible emission. Optical emission results are presented and discussed in this paper. Both 3D structures deposition and annealing experiments can be extended to other III–V m…
A new approach to the crystal growth of Hg1−xMnxTe by the cold travelling heater method (CTHM)
2001
Abstract In order to obtain crystals with a homogeneous composition and to reduce the Hg high pressure related to the temperature synthesis reaction between the components in elemental form, Hg 1− x Mn x Te bulk crystals were produced by the cold travelling heater method (CTHM). Following the technique initially proposed for the growth of CdHgTe by the Triboulet group, the feed material was a split ingot of two segments, one of HgTe and the other of MnTe, with cross-sectional areas chosen to establish the desired final composition. The growth was carried out at a temperature of 600°C and a rate of 2 mm/h. The Hg 1− x Mn x Te crystals have been characterised by scanning electron microscopy, …
Rod-like ferrites obtained through thermal degradation of a molecular ferrimagnet
2010
This paper presents the characteristics of iron oxides obtained through thermal degradation of a molecular ferrimagnet, {N(n-C4H9)4[Fe II
Microstructural modifications resulting from the dehydration of gypsum
2001
Various faces of dehydrated gypsum-cleaved blocks and single crystals have been investigated using optical microscopy, SEM, and TEM. The orientation of the cracks with respect to the initial gypsum structure and the Miller indices of all possible crack planes have been determined. These crack planes have been found to be few and to correspond to planes of high atomic density in the initial and final structures, therefore characterised by a low surface tension. These observations allow us to propose cracking criteria based on general concepts of crystal growth. The cracks' dimensions measured on different faces of the pseudomorph are distributed over several orders of magnitude and seems to …
Laser-Casein phosphopeptide effect on remineralization of early enamel lesions in primary teeth
2014
Background: The aim of this study was to assess the effect of Nd:YAG laser irradiation following casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) application on calcium and phosphate concentration and surface microhardness (SMH) of enamel surface in artificial white spot lesions of primary teeth. Material and Methods: Eighty teeth with artificial white spot lesions were randomly divided into four groups: (A) distilled and deionized water, (B) Nd:YAG laser, (C) CPP-ACP crème, & (D) CPP-ACP plus laser. SMH was measured using Vickers diamond indenter in Vickers Hardness Number (VHN). Two samples of each group were analyzed using scanning electron microscope (SEM). The results were a…
A comparative study for the removal of methylene blue dye by N and S modified TiO2 adsorbents
2015
Successful removal of methylene blue (MB) dye from aqueous solutions using nitrogen and sulfur modified TiO2(P25) nanoparticles has been demonstrated in this study. The modified adsorbents were characterized using various analytical methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The adsorption potential of S-TiO2, N-TiO2 and TiO2(P25) type adsorbents was tested for the removal of MB dye. The kinetic studies indicated that the adsorption of MB dye followed the pseudo-first order model, while desorption processes followed the second order model. The adsorption capacity of the adsorbent proved to be increasing as a f…
Identification of Chinese fresh-water pearls using MN2+ activated cathodoluminescence
2000
Fresh-water tissue graft-cultured pearls from China were investigated using hot cathode and cold cathode cathodoluminescence microscopes. Supplementary investigations were done using X-radiography, a Scanning Electron Microscope, an optical microscope, and an Atomic Force Microscope (AFM). The results were compared with those of natural fresh-water pearls from the Mississippi river. Thin sections of fresh-water natural pearls from the Mississippi river could be distinguished from those of fresh-water tissue graft cultured pearls from China using a hot cathode cathodoluminescence microscope according to the distribution of Mn2+ as follows: (1) Fresh-water tissue graft cultured pearls from Ch…