Search results for "scanning"
showing 10 items of 1808 documents
'Cold' crystallization in nanostructurized 80GeSe2-20Ga2Se3 glass
2015
International audience; 'Cold' crystallization in 80GeSe 2-20Ga 2 Se 3 chalcogenide glass nanostructurized due to thermal annealing at 380°C for 10, 25, 50, 80, and 100 h are probed with X-ray diffraction, atomic force, and scanning electron microscopy, as well as positron annihilation spectroscopy performed in positron annihilation lifetime and Doppler broadening of annihilation line modes. It is shown that changes in defect-related component in the fit of experimental positron lifetime spectra for nanocrystallized glasses testify in favor of structural fragmentation of larger free-volume entities into smaller ones. Nanocrystallites of Ga 2 Se 3 and/or GeGa 4 Se 8 phases and prevalent GeSe…
Graphene oxide-silica nanohybrids as fillers for PA6 based nanocomposites
2014
Graphene oxide (GO) was prepared by oxidation of graphite flakes by a mixture of H2SO4/H3PO4 and KMnO4 based on Marcano's method. Two different masterbatches containing GO (33.3%) and polyamide-6 (PA6) (66.7%) were prepared both via solvent casting in formic acid and by melt mixing in a mini-extruder (Haake). The two masterbatches were then used to prepare PA6-based nanocomposites with a content of 2% in GO. For comparison, a nanocomposite by direct mixing of PA6 and GO (2%) and PA6/graphite nanocomposites were prepared, too. The oxidation of graphite into GO was assessed by X-ray diffraction (XRD), Micro-Raman spectroscopy, scanning electron microscopy (SEM), X-ray photoelectron spectrosco…
Novel Au NPs/Preyssler acid/TiO 2 nanocomposite for the photocatalytic removal of azo dye
2014
Abstract In this study, we introduced a novel nanocomposite consisting of Au nanoparticles decorated TiO 2 and Preyssler acid as a multifunctional photocatalyst linker molecule, in which gold ions reduced locally on the TiO 2 surface. The obtained nanocomposite has been characterized using Fourier Transform Infrared (FTIR), X-ray Diffraction (XRD), Electron Dispersive X-ray (EDX) Spectroscopy, Transmission Electron Microscopy (TEM) and Scanning Electron Microscope (SEM). Also, their photocatalytic activity has been studied for the degradation of model organic azo dye Malachite Green under UV light irradiation.
<title>Metallic and semiconducting nanowires: properties and architectures</title>
2003
Nanowires are expected to play an important role in future electronic, optical devices and nanoelectromechanical devices. Measuring the electrical and mechanical properties of nanowires is however a difficult task due to their small dimensions. Here we report the use of an in-situ microscopy technique, which combines transmission electron microscopy (TEM) with scanning probe microscopy (SPM), to investigate the electrical and mechanical properties of metallic and semiconductor nanowires. Additionally, in this paper we describe a novel approach for synthesizing mesoporous silicas with tunable pore diameters, wall thickness and pore spacings that can be used as tempates for the assembly of se…
Development of self-assembled bacterial cellulose–starch nanocomposites
2009
Abstract A bioinspired bottom-up process was developed to produce self-assembled nanocomposites of cellulose synthesized by Acetobacter bacteria and native starch. This process takes advantage of the way some bacteria extrude cellulose nanofibres and of the transport process that occurs during the gelatinization of starch. Potato and corn starch were added into the culture medium and partially gelatinized in order to allow the cellulose nanofibrils to grow in the presence of a starch phase. The bacterial cellulose (BC)–starch gels were hot pressed into sheets that had a BC volume fraction higher than 90%. During this step starch was forced to further penetrate the BC network. The self-assem…
Comparative performance of electrospun collagen nanofibers cross-linked by means of different methods.
2009
[EN] Collagen, as the major structural protein of the extracellular matrix in animals, is a versatile biomaterial of great interest in various engineering applications. Electrospun nanofibers of collagen are regarded as very promising materials for tissue engineering applications because they can reproduce the morphology of the natural bone but have as a drawback a poor structural consistency in wet conditions. In this paper, a comparative study between the performance of different cross-linking methods such as a milder enzymatic treatment procedure using transglutaminase, the use of N-[3-(dimethylamino)propyl]-N¿-ethylcarbodiimide hydrochloride/ N-hydroxysuccinimide, and genipin, and the u…
Real-time measurements of sliding friction and elastic properties of ZnO nanowires inside a scanning electron microscope
2011
Abstract A real-time nanomanipulation technique inside a scanning electron microscope (SEM) has been used to investigate the elastic and frictional (tribological) properties of zinc oxide nanowires (NWs). A NW was translated over a surface of an oxidised silicon wafer using a nanomanipulator with a glued atomic-force microscopic tip. The shape of the NW elastically deformed during the translation was used to determine the distributed kinetic friction force. The same NW was then positioned half-suspended on edges of trenches cut by a focused ion beam through a silicon wafer. In order to measure Young’s modulus, the NW was bent by pushing it at the free end with the tip, and the interaction f…
Real-time manipulation of gold nanoparticles inside a scanning electron microscope
2011
Abstract The forces needed to overcome static friction and move 150 nm diameter Au nanoparticles on an oxidized Si substrate were measured in Normal and Shear oscillation modes inside a scanning electron microscope (SEM) in real time. The experimental setup consisted of a quartz tuning fork (QTF) mounted onto a high-precision 3D nanomanipulator used with a glued silicon or tungsten tip as a force sensor. Static friction was found to range from tens of nN to several hundred nN. Large variations in static friction values were related to differences in particle shape. Kinetic friction tended to be close to the detection limit and in most cases did not exceed several nN. The influence of therma…
Morphological evolution of InAs/InP quantum wires through aberration-corrected scanning transmission electron microscopy
2010
Evolution of the size, shape and composition of self-assembled InAs/InP quantum wires through the Stranski–Krastanov transition has been determined by aberration-corrected Z-contrast imaging. High resolution compositional maps of the wires in the initial, intermediate and final formation stages are presented. (001) is the main facet at their very initial stage of formation, which is gradually reduced in favour of {114} or {118}, ending with the formation of mature quantum wires with {114} facets. Significant changes in wire dimensions are measured when varying slightly the amount of InAs deposited. These results are used as input parameters to build three-dimensional models that allow calcu…
Smart High-κ Nanodielectrics Using Solid Supported Polyoxometalate-Rich Nanostructures
2011
Utilizing Langmuir-Blodgett deposition and scanning probe microscopy, we have investigated the extent to which cations alter the self-assembly processes of hybrid polyoxometalates (POMs) on surfaces. The well-defined 2D hexagonal nanostructures obtained were extensively characterized and their properties were studied, and this has revealed fascinating dielectric behavior and reversible capacitive properties. The nanostructures are extremely stable under ambient conditions, and yet exhibit fascinating self-patterning upon heating. These findings present POMs as effective smart nanodielectrics and open up a new field for future POM applications. (c) 2011 American Chemical Society.