Search results for "sewage"
showing 10 items of 480 documents
Minimizing membrane bioreactor environmental footprint by multiple objective optimization.
2020
This paper presents a modelling study aimed at minimizing the environmental foot print of a membrane bioreactor (MBR) for wastewater treatment. Specifically, an integrated model for MBR was employed in view of the management optimization of an MBR biological nutrient removal (BNR) pilot plant in terms of operational costs and direct greenhouse gases emissions. The influence of the operational parameters (OPs) on performance indicators (PIs) was investigated by adopting the Extended-FAST sensitivity analysis method. Further, a multi-objective analysis was performed by applying the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). The results show-up that the sludge …
Sensitivity and uncertainty analysis of an integrated ASM2d MBR model for wastewater treatment
2018
Abstract An integrated membrane bioreactor (MBR) model was previously proposed and tested. The model provides a comprehensive and detailed description of the nitrogen biological removal processes with respect to up-to-date literature. This paper presents a sensitivity and uncertainty analysis aimed at identifying the key factors affecting the variability of the model predictions. The Standardized Regression Coefficients (SRC) method was adopted for the sensitivity analysis. The uncertainty analysis was employed by running Monte Carlo simulations by varying only the value of the key factors affecting the model outputs. The sensitivity analysis combined with the uncertainty analysis applied h…
Simultaneous sludge minimization, biological phosphorous removal and membrane fouling mitigation in a novel plant layout for MBR.
2020
Abstract The integration of one anaerobic reactor in the mainstream (AMSR) of a pre-denitritication-MBR was evaluated with the aim to achieve simultaneous sludge minimization and phosphorous removal. The excess sludge production was reduced by 64% when the AMSR was operated under 8 h of hydraulic retention time (HRT). The highest nutrients removal performances referred to organic carbon (98%), nitrogen (90%) and phosphorous (97%) were obtained under 8 h of HRT. In contrast, prolonged anaerobic-endogenous conditions were found to be detrimental for all nutrients removal performances. Similarly, the lowest membrane fouling tendency (FR = 0.65∙1011 m−1 d−1) was achieved under 8 h of HRT, where…
Biological minimization of excess sludge in a membrane bioreactor: Effect of plant configuration on sludge production, nutrient removal efficiency an…
2018
Abstract Excess sludge minimization was studied in a MBR with pre-denitrification scheme. Sludge minimization, nitrogen removal performance and membrane fouling tendency were investigated in two configurations, characterized by a different position of the sludge retention reactor (SRR). In particular, the SRR was placed: i) in the return activated sludge line (Anaerobic Side-Stream Reactor – ASSR configuration) and ii) in the mainstream between the anoxic and aerobic reactor (Anaerobic Main-Stream Reactor – AMSR configuration). The achieved results demonstrated that the ASSR enabled a higher excess sludge reduction (74% vs 32%), while achieving lower biological nitrogen removal (BNR) (TN = …
Integrated fixed-film activated sludge membrane bioreactors versus membrane bioreactors for nutrient removal: A comprehensive comparison
2018
Abstract This research elucidates the pollutants (nutrients and carbon) removal performance and nitrous oxide (N2O) emissions of two pilot plants. Specifically, a University of Cape Town (UCT) Membrane Bioreactor (MBR) plant and an Integrated Fixed Film Activated Sludge (IFAS)-UCT-MBR plant were investigated. The plants were fed with real wastewater augmented with acetate and glycerol in order to control the influent carbon nitrogen ratio (C/N). The short-term effect of the inlet C/N ratio variation (C/N = 5 mgCOD/mgN and C/N = 10 mgCOD/mgN) on the behaviour of both plants was investigated. The results showed that the IFAS-UCT-MBR configuration provided the best performance in terms of poll…
A comprehensive integrated membrane bioreactor model for greenhouse gas emissions
2018
Abstract A comprehensive integrated membrane bioreactor (MBR) model for wastewater treatment is here proposed. The model quantifies the main biological and physical processes. The model describes the biological removal of organic matter, nitrogen and phosphorus including greenhouse gases (carbon dioxide, CO 2 and nitrous oxide, N 2 O). The model takes into account the following main innovative aspects jointly: i. Two-step nitrification process; ii. N 2 O formation due to ammonia-oxidizing bacteria as a product of the hydroxylamine oxidation (NH 2 OH) and of the nitrite (NO 2 − ) reduction; iii. Soluble microbial product (SMP) formation/degradation due to microbial growth and endogenous resp…
Performance of a MBR pilot plant treating high strength wastewater subject to salinity increase: Analysis of biomass activity and fouling behaviour
2013
Membrane bioreactors produce high quality effluents that could be suitable for reuse. However, when treating high strength wastewater subject to a salinity increase, a modification of biomass characteristics may occur. This circumstance is of importance, since it can have a significant impact in terms of biokinetic as well as fouling behaviour. The aim of the study was to evaluate the performance of a pilot plant MBR, in terms of biomass activity and membrane fouling, fed with high strength synthetic wastewater, when subject to a salinity increase. With normal salinity, the pilot plant showed high removal efficiencies and high biomass respiratory activity. On the other hand, the salinity in…
ChemInform Abstract: Membranes for Photocatalysis in Water and Wastewater Treatment
2012
Abstract: The chapter reports the basic principles of heterogeneous photocatalysis together with a brief presentation of the types of membranes and membrane operations most widely used in this type of application. Coupling the two technologies with the aim of obtaining synergistic effects for conversion in liquid–solid systems is discussed and the relevant papers together with some case studies in pollutants abatement and reaction of synthesis are highlighted.
Eubacteria and archaea communities in seven mesophile anaerobic digester plants in Germany
2015
Background Only a fraction of the microbial species used for anaerobic digestion in biogas production plants are methanogenic archaea. We have analyzed the taxonomic profiles of eubacteria and archaea, a set of chemical key parameters, and biogas production in samples from nine production plants in seven facilities in Thuringia, Germany, including co-digesters, leach-bed, and sewage sludge treatment plants. Reactors were sampled twice, at a 1-week interval, and three biological replicates were taken in each case. Results A complex taxonomic composition was found for both eubacteria and archaea, both of which strongly correlated with digester type. Plant-degrading Firmicutes as well as Bacte…
Influence of the initial sludge characteristics and acclimation on the longterm performance of double-compartment acetate-fed microbial fuel cells
2018
Abstract In this work, three double-compartment MFCs (DC-MFC) were operated for 1 month in order to compare their performances in terms of wastewater treatment capacity and electricity production and to get information about how this performance is influenced by the start-up procedure. To do this, they underwent different start-up procedures. One of them (aerobic-starved MFC) was inoculated with 100% fresh aerobic sludge, another (anaerobic-starved MFC) using 100% fresh anaerobic sludge, and finally a third one (aerobic-fed MFC) was inoculated using a mixture 10% fresh aerobic sludge and 90% synthetic wastewater (based on acetate). Then, from this start-up, the cells were operated exactly u…