Search results for "silicon"
showing 10 items of 1391 documents
Biotrickling filter modeling for styrene abatement. Part 2: Simulating a two-phase partitioning bioreactor.
2017
Abstract A dynamic model describing styrene abatement was developed for a two-phase partitioning bioreactor operated as a biotrickling filter (TPPB-BTF). The model was built as a coupled set of two different systems of partial differential equations depending on whether an irrigation or a non-irrigation period was simulated. The maximum growth rate was previously calibrated from a conventional BTF treating styrene (Part 1). The model was extended to simulate the TPPB-BTF based on the hypothesis that the main change associated with the non-aqueous phase is the modification of the pollutant properties in the liquid phase. The three phases considered were gas, a water–silicone liquid mixture, …
New silica based adsorbent material from rice straw and its in-flow application to nitrate reduction in waters: Process sustainability and scale-up p…
2021
Abstract This paper shows a particular example to move to a sustainable circular economical process from valorization of rice straw ashes by developing a green synthesis for obtaining a useful sub-product. This strategy can palliate negative effects of the agriculture waste practices on the environment and also the obtained silica reduced nitrate content in waters. It is demonstrated that the silica synthesis developed at lab was scalable more than a hundred times with good results. Adsorption studies of nitrate in standards and real well waters at lab scale and scaling-up provided similar results. Adsorption values near to 15 mg/g for nitrate standards and 8.5 mg/g for well water were obta…
Photocatalytic activity of TiO2/SiO2 systems
2009
Silica-supported TiO(2) powders were synthesized by a wet method under mild conditions. The aim of the work was the preparation of TiO(2)/SiO(2) additives for photocatalytic cements. Three types of commercial SiO(2) were used as supports: Cabot, Axim and Fly Ash. Cabot silica was ultra-pure whereas the other two silica contained different percentages of various oxides. The TiO(2)/SiO(2) samples, denoted TiO(2)/Cabot, TiO(2)/Axim and TiO(2)/Fly Ash, were prepared by boiling suspensions obtained by addition of silica to a solution of TiCl(4) in water (volume ratio 1:10). The photocatalytic activity was evaluated in a gas-solid system both in batch and in continuous reactors using 2-propanol a…
Design, characterization and comparison of materials based on β and γ cyclodextrin covalently connected to microporous silica for environmental analy…
2018
Abstract Determination of organic pollutants in environmental samples presents great difficulties due to the lack of sensitivity and selectivity in many of the existing analytical methods. In this work, the efficiency of materials based on silica structures containing bounded γ-cyclodextrin has been evaluated to determinate phenolic compounds and polycyclic aromatic hydrocarbons in air and water samples, respectively, in comparison with materials made of β-cyclodextrin. According to the results obtained for the material characterization, the new γ-cyclodextrin solid phase does not apparently present any porosity when used in air samples, but it has been shown to work efficiently for the pre…
Self-healing, an intrinsic property of biomineralization processes
2013
The sponge siliceous spicules are formed enzymatically via silicatein, in contrast to other siliceous biominerals. Originally, silicatein had been described as a major structural protein of the spicules that has the property to allow a specific deposition of silica onto their surface. More recently, it had been unequivocally demonstrated that silicatein displays a genuine enzyme activity, initiating and maintaining silica biopolycondensation at low precursor concentrations (<2 mM). Even more, as silicatein becomes embedded into the biosilica polymer, formed by the enzyme, it retains its functionality to enable a controlled biosilica deposition. The protection of silicatein through the biosi…
Reactions at Interfaces: Oxygenation of n-Butyl Ligands Anchored on Silica Surfaces with Methyl(trifluoromethyl)dioxirane
2011
The oxygenation of n-butyl and n-butoxy chains bonded to silica with methyl(trifluoromethyl)dioxirane (1) revealed the ability of the silica matrix to release electron density toward the reacting C(2)-H σ-bond through the Si-C(1) and Si-O(1) σ-bonds connecting the alkyl chain to the surface (silicon β-effect). The silica surface impedes neither the alkyl chain adopting the conformation required for the silicon β-effect nor dioxirane 1 approaching the reactive C(2) methylene group. Reaction regioselectivity is insensitive to changes in the solvation of the reacting system, the location of organic ligands on the silica surface, and the H-bonding character of the silica surface. Reaction rates…
Ethylene and phenylene bridged polysilsesquioxanes functionalized by amine and thiol groups as adsorbents of volatile organic compounds
2007
Abstract Ethylene and phenylene bridged polysilsesquioxane xerogels having amine and thiol groups attached to the surface have been obtained by the sol–gel method from 1,2-bis(triethoxysilyl)ethane or 1,4-bis(triethoxysilyl)benzene and functionalized silanes in the presence of an ammonium fluoride catalyst in an ethanol solution. The synthesized samples have a porous structure (700–850 m2/g) and a high content of functional groups (1.4–1.9 mmol/g). The obtained porous bridged polysilsesquioxanes exhibit a considerable affinity for adsorbing several organic compounds (n-hexane, n-heptane, benzene, cyclohexane, acetonitrile and triethylamine) from the gas phase. The sample with an ethylene br…
Evanescent wave-initiated photopolymerisation as a new way to create monolithic open-tubular capillary columns: use as enzymatic microreactor for on-…
2010
Evanescent wave-initiated photopolymerisation in an optically wave guiding PTFE-coated fused silica capillary using light-emitting diode as a light source, is established here as a way to fabricate monolithic porous layer open-tubular capillary columns with a potential in capillary separation methods; application of the obtained open-tubular columns as enzymatic microreactors for on-line protein digestion is demonstrated.
The Large Observatory for X-ray Timing (LOFT)
2012
High-time-resolution X-ray observations of compact objects provide direct access to strong-field gravity, to the equation of state of ultra-dense matter and to black hole masses and spins. A 10 m^2-class instrument in combination with good spectral resolution is required to exploit the relevant diagnostics and answer two of the fundamental questions of the European Space Agency (ESA) Cosmic Vision Theme "Matter under extreme conditions", namely: does matter orbiting close to the event horizon follow the predictions of general relativity? What is the equation of state of matter in neutron stars? The Large Observatory For X-ray Timing (LOFT), selected by ESA as one of the four Cosmic Vision M…
Combustion synthesis of MoSi2 and MoSi2–Mo5Si3 composites: Multilayer modeling and control of the microstructure
2010
International audience; In this work, we present a multilayer modeling for the formation of molybdenum silicides in the exothermic reaction between Mo and Si under the influence of a temperature pulse. The heating rate can either be a well-controlled ramp or be generated spontaneously by the propagation of a combustion synthesis front. The model addresses the specific situation above the melting point of silicon and describes the solid–liquid reaction taking place in a single representative particle of molybdenum surrounded by the melt of silicon. We obtain a set of kinetic equations for the propagation of the interfaces between the different layers (Mo/Mo5Si3 and Mo5Si3/MoSi2) in the solid…