Search results for "silicon"
showing 10 items of 1391 documents
Flow-through pore characteristics of monolithic silicas and their impact on column performance in high-performance liquid chromatography
2008
Abstract In order to elucidate the role of the flow-through characteristics with regard to the column performance in high-performance liquid chromatography (HPLC) native and n -octadecyl bonded monolithic silica rods and columns, respectively of 100 mm length and 4.6 mm ID with mesopores in the range between 10 and 25 nm and macropores in the range between 0.7 and 6.0 μm were examined by mercury intrusion/extrusion, scanning electron microscopy, image analysis and permeability. The obtained data of the flow-through pore sizes and porosity values as well as surface-to-volume ratio of the stationary phase skeleton enabled to predict their influence to the chromatographic separation efficiency…
Comprehensive pore structure characterization of silica monoliths with controlled mesopore size and macropore size by nitrogen sorption, mercury poro…
2005
The porosity of monolithic silica columns is measured by using different analytical methods. Two sets of monoliths were prepared with a given mesopore diameter of 10 and 25 nm, respectively and with gradated macropore diameters between 1.8 and 7.5 microm. After preparing the two sets of monolithic silica columns with different macro- and mesopores the internal, external and total porosity of these columns are determined by inverse size-exclusion chromatography (ISEC) using polystyrene samples of narrow molecular size distribution and known average molecular weight. The ISEC data from the 4.6 mm analytical monolithic silica columns are used to determine the structural properties of monolithi…
Pore structural characterization of monolithic silica columns by inverse size-exclusion chromatography
2007
In this work, a parallel pore model (PPM) and a pore network model (PNM) are developed to provide a state-of-art method for the calculation of several characteristic pore structural parameters from inverse size-exclusion chromatography (ISEC) experiments. The proposed PPM and PNM could be applicable to both monoliths and columns packed with porous particles. The PPM and PNM proposed in this work are able to predict the existence of the second inflection point in the experimental exclusion curve that has been observed for monolithic materials by accounting for volume partitioning of the polymer standards in the macropores of the column. The appearance and prominence of the second inflection …
Textural characterization of native and n-alky-bonded silica monoliths by mercury intrusion/extrusion, inverse size exclusion chromatography and nitr…
2008
Native and n-alkyl-bonded (n-octadecyl) monolithic silica rods with mesopores in the range between 10 and 25 nm and macropores in the range between 1.8 and 6.0 microm were examined by mercury intrusion/extrusion, inverse size exclusion chromatography (ISEC) and nitrogen sorption. Our results reveal very good agreement for the mesopore size distribution obtained from nitrogen adsorption (in combination with an advanced NLDFT analysis) and ISEC. Our studies highlight the importance of mercury porosimetry for the assessment of the macropore size distribution and show that mercury porosimetry is the only method which allows obtaining a combined and comprehensive structural characterization of m…
Micro‐tomographic characterization of composite recycled glass‐silicone foams for applications in civil engineering
2019
Noninvasive X‐ray micro‐computed tomography was applied for a complete quantitative and qualitative analysis of the cellular structure of composite foams constituted by a silicone matrix and a glass production waste filler. Composite foams with different glass filler weight content in the range 0–80% were synthesized and characterized. The tomographic analysis was employed in order to assess the structural heterogeneities, void fraction values, and bubble size distribution for all composite foams. The 3D micro‐CT images analysis, performed at different cross‐sections, highlighted heterogeneous cell growth or more elongated cells in the case of low and high filler content foams, respectively…
Antiviral efficacy of cerium oxide nanoparticles.
2022
The authors gratefully acknowledge the financial support by the Estonian Research Council Grants (COVSG2, PRG629, PRG1496), Estonian Centre of Excellence in Research project “Advanced materials and high-technology devices for sustainable energetics, sensorics and nanoelectronics” TK141 (2014-2020.4.01.15-0011) and University of Tartu Development Fund (PLTFYARENG53). The research was partly conducted using the NAMUR+ core facility funded by projects “Center of nanomaterials technologies and research” (2014-2020.4.01.16-0123) and TT13.
Aluminum-27 double-rotation NMR investigations of SAPO-5 with variable silicon content
1995
Summary Double-rotation NMR (DOR) studies of 27 Al species in SAPO-5, a silicon aluminophosphate molecular sieve with a one dimensional channel system, have revealed a minimum of three aluminum sites resulting from the synthesis. The DOR technique was used specifically to increase the spectral resolution by removing the broadening influences from second-order quadrupolar interactions associated with the spin 5/2 27 Al nuclei. The DOR investigations of SAPO-5 crystals with variable Si/Al ratios resulted in the identification of three aluminum species, two consistent with the reported isotropic shift values for AlPO 4 -5; however, these two resonances are only observable when small quantities…
Memory cell structure integrated on semiconductor
2004
This invention relates to a memory cell Which comprises a capacitor having a ?rst electrode and a second electrode separated by a dielectric layer. Such dielectric layer com prises a layer of a semi-insulating material Which is fully enveloped by an insulating material and in Which an electric charge is permanently present or trapped therein. Such electric charge accumulated close to the ?rst or to the second electrode, depending on the electric ?eld betWeen the electrodes,therebyde?ningdifferentlogiclevels.
A Novel Plasmonic Nanoantenna for High Efficiency Energy Harvesting Applications
2020
In this paper, the results of a geometric investigation of plasmonic nanoantennas for energy harvesting applications in terms of field enhancement and available power are presented. Optimum performances are obtained by a particular arrow-shaped bowtie nanoantennas geometry. The novel nanoantenna geometry is here presented. The simulations of the novel nanoantennas made of aluminium, on a three-layers substrate, composed by silicon, silicon oxide, and aluminium, carried out with CST 2018 tool, are reported and compared with the classical bowtie nanoantennas ones. This study can guide both the engineering and the fabrication of plasmonic nanoantennas.
Memory effects in MOS devices based on Si quantum dots
2003
Silicon quantum dots have been deposited on top of a 3-nm tunnel oxide by Low Pressure Chemical Vapour Deposition (LPCVD) and coated with a 7-nm Chemical Vapour Deposited (CVD) oxide. This stack was then incorporated in Metal-Oxide-Semiconductor structure and used as floating gate of a memory cell. The presence of 3 nm of tunnel oxides allows the injection of the charge by direct tunnel (DT) using low voltages for both program and erase operations. The charge stored in the quantum dots is able to produce a well-detectable flat band shift in the capacitors or, equivalently, a threshold voltage shift in the transistors. Furthermore, due to the presence of SiO 2 between the grains, the lateral…