Search results for "solid phase"
showing 10 items of 360 documents
Rapid fluorimetric assay for primary amine groups in water samples
2003
Bond Elut C(18) solid-phase extraction cartridges were used for pre-concentration followed by derivatization with o-phthaldialdehyde-N-acetylcysteine (OPA-NAC) of primary amines in water. Optimal conditions were: conditioning the cartridges with borate buffer pH 10.4, retention of the primary amines, addition of the OPA-NAC(3.7 mmol L(-1)) 1:1 molar ratio and borate buffer pH 8, elution of the isoindol with MeOH-borate buffer (9:1) pH 10.2 and fluorescence measurement. The equations of the calibration graphs for methylamine, ethylamine, propylamine, butylamine, pentylamine, and beta-phenylethylamine at lambda(excitation)=330 nm and lambda(emission)=440 nm, in the optimal conditions are pres…
Maturation of a Key Resource – The Germanium-68/Gallium-68 Generator: Development and New Insights
2011
(68)Ge/(68)Ga radionuclide generators have been investigated for almost fifty years, since the cyclotron-independent availability of positron emitting (68)Ga via the (68)Ge/(68)Ga system had always attracted researches working in basic nuclear chemistry as well as radiopharmaceutical chemistry. However, it took decades and generations of research (and researchers) to finally reach a level of (68)Ge/(68)Ga radionuclide generator designs adequate to the modern requirements of radiometal labelling chemistry. Nevertheless, most of the existing commercial generator systems address aspects of (68)Ge breakthrough and safe synthesis of (68)Ga radiopharmaceuticals by adopting eluate post-processing …
Application of pressurized fluid extraction to determine cadmium and zinc in plants
2006
Abstract A procedure for the determination of Cd and Zn in plants is proposed. The metals are extracted by pressurized fluid extraction (PFE). Operational conditions are: pressure 1500 psi, temperature 75 °C, static time 5 min, flush volume 35%, purge time 60 s, cycles 1 and 1,2-diaminocyclohexane- N , N , N ′, N ′-tetraacetic acid (CDTA) 0.01 M at pH 4.5 as extracting solution. Determination of Zn is carried out by flame atomic absorption spectroscopy and depending on the concentration level, Cd content is determined by flame or electrothermal atomic absorption spectroscopy. Certified samples of Virginia tobacco leaves, tea leaves, spinach leaves, poplar leaves, a commercial spinach sample…
Partition of volatile compounds in pea globulin–maltodextrin aqueous two-phase system
2014
International audience; This study is based on the assumption that the off-flavour of pea proteins might be decreased using the retention of volatile compounds by a mixture with another biopolymer. The partition of volatile compounds in an aqueous system containing pea protein and maltodextrins was followed under thermodynamic incompatibility conditions. Firstly, the phase diagram of the system was established. Then, the partition of aroma compounds between the phase rich in protein and the phase rich in maltodextrin was measured by SPME–GC–MS. There was a transfer of volatile compounds during phase separation. Variations of pH were also used to vary the retention of volatile compounds by p…
Occurrence of pharmaceuticals in municipal wastewater treatment plants and receiving surface waters in Central and Southern Finland
2016
The presence of five selected pharmaceuticals, four anti-inflammatory drugs, diclofenac, ibuprofen, ketoprofen, naproxen, and an antiepileptic drug carbamazepine, was determined at four municipal wastewater treatment plants (WWTPs) and in the receiving waterway near the city of Jyväskylä, in central Finland and also in the River Vantaa. First, an analytical method was developed including a pretreatment and purification followed by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) in the multiple reaction monitoring mode. The studied pharmaceuticals were detected from influents and effluents of four municipal WWTPs and from surface water of eight locations along the water …
A multiresidue analytical method for trace level determination of antibiotics and antiretroviral drugs in wastewater and surface water using SPE-LC-M…
2016
An analytical method for simultaneous determination of seven commonly used antibiotics and three antiretrovirals in surface water and urban wastewater at the ng L−1 level has been developed. The method involves concentration and clean-up by solid phase extraction (SPE) followed by identification and quantification by liquid chromatography tandem mass spectrometry (LC-ESI-MS/MS). The use of matrix-matched calibration curves constructed by spiking surface water was evaluated for quantification and compared with the internal standard method using isotopically labelled compounds. The method gave absolute recoveries of 41–116% with most of the compounds having recoveries >50%. The LOQs ranged fr…
Evaluation of Superparamagnetic Silica Nanoparticles for Extraction of Triazines in Magnetic in-Tube Solid Phase Microextraction Coupled to Capillary…
2014
The use of magnetic nanomaterials for analytical applications has increased in the recent years. In particular, magnetic nanomaterials have shown great potential as adsorbent phase in several extraction procedures due to the significant advantages over the conventional methods. In the present work, the influence of magnetic forces over the extraction efficiency of triazines using superparamagnetic silica nanoparticles (NPs) in magnetic in tube solid phase microextraction (Magnetic-IT-SPME) coupled to CapLC has been evaluated. Atrazine, terbutylazine and simazine has been selected as target analytes. The superparamagnetic silica nanomaterial (SiO2-Fe3O4) deposited onto the surface of a capil…
Preconcentration and speciation analysis of mercury : 3D printed metal scavenger-based solid-phase extraction followed by analysis with inductively c…
2021
A selective method for preconcentration and determination of methylmercury (MeHg) and inorganic mercury (iHg) in natural water samples at the ng L−1 level has been developed. The method involves adsorption of Hg species into a 3D printed metal scavenger and sequential elution with acidic thiourea solutions before ICP-MS determination. Experimental parameters affecting the preconcentration of MeHg and iHg such as the sample matrix, effect of the flow rate on adsorption, eluent composition, and elution mode have been studied in detail. The obtained method detection limits, considering the preconcentration factors of 42 and 93, were found to be 0.05 ng L−1 and 0.08 ng L−1 for MeHg and iHg, res…
Non-Occupational Exposure to Pesticides: Experimental Approaches and Analytical Techniques (from 2019)
2021
© 2021 by the authors.
Assays for detection of fungal hallucinogens such as psilocybin and psilocin
2016
Methods applicable to the detection of hallucinogenic indole compounds, namely psilocybin, psilocin, and related molecules, that have been developed so far for purposes of mycological research, toxicological studies, or forensic investigations are described in this chapter. The most current literature as well as some interesting older publications are cited, providing a historical overview of the subject. Methods of qualitative and quantitative analysis are presented. Additionally, preliminary purification steps and sample treatment before the exact quantitative determination are proposed. The methods described utilized various analytical techniques for the measurement of psilocybin/psiloci…