Search results for "solu"
showing 10 items of 7577 documents
Determination of the Boron/Lead Ratio in Ceramic Materials Based on Electrochemical Quartz Crystal Microbalance
2004
A method for quantitatively determining the relationship boron/lead in ceramic materials is presented. It is based on the attachment of microsamples of ceramic frits to an electrochemical quartz crystal microbalance (EQCM). After a reductive deposition step in the � 0.25 to � 0.85 V (vs. AgCl/Ag) potential range, well-defined stripping peaks are recorded in 0.10 M NaCl plus 0.10 M mannitol. The deposition of boron and lead from suspensions of solid materials, and its subsequent oxidative dissolution can be monitorized at the EQCM. The quotient between the maximum mass gain and the corresponding charge passed enables for a direct quantitation of the boron/lead molar ratio in ceramic material…
Preparation of polyelectrolyte-modified membranes for heavy metal ions removal
2017
ABSTRACTPolyethersulfone membranes were modified by polyelectrolyte (PE) multilayers, made of poly(allylamine hydrochloride) with poly(styrene sulfonate), to remove Cu2+, Zn2+ and Ni2+ heavy metal cations from aqueous solutions in a wide range of metal concentration (50–1200 ppm). After characterization of the modified membranes, the efficiency of the process was estimated for single heavy metal ions solution leading to high rejection rates (>90% for 50 ppm) and good adsorption capacities (7.0–8.5 mg cm−2) whatever the metal ion tested. The stability in time of the modified membranes was proved by repeating successive filtrations with the same membrane. The filtration process was also used …
Laboratory measurements and astronomical search for the HSO radical
2016
[Context] Despite the fact that many sulfur-bearing molecules, ranging from simple diatomic species up to astronomical complex molecules, have been detected in the interstellar medium, the sulfur chemistry in space is largely unknown and a depletion in the abundance of S-containing species has been observed in the cold, dense interstellar medium. The chemical form of the missing sulfur has yet to be identified.
Prolin-benzylester als chirale Hilfsgruppen in asymmetrischen 1,3-dipolaren Cycloadditionen mit Nitriloxiden
1990
Proline Benzyl Esters as Chiral Auxiliaries in Asymmetric 1,3-Dipolar Cycloadditions N-Acryloylproline benzyl ester (1b) reacts with nitrile oxides at temperatures from −78 to 0°C to give isoxazolines 4/5 with diastereomeric ratios of ca. 3:1 and with the (5S) isomer as the predominating. The corresponding N-methacryloylproline benzyl ester (1c) gives inferior results. The diastereoselectivity is not influenced by the temperature and the substituents of the nitrile oxides. To prove the absolute configuration of the predominating stereoisomer, a reaction sequence is developed which makes use of an enantioselective hydrolysis with pig liver esterase as the key step to generate an optically ac…
Identifying Iron-Bearing Nanoparticle Precursor for Thermal Transformation into the Highly Active Hematite Photo-Fenton Catalyst
2020
Funding: This reseach was funded by the European Regional Development Fund within the Activity 1.1.1.2 “Post-doctoral Research Aid” of the Specific Aid Objective 1.1.1 “To increase the research and innovative capacity of scientific institutions of Latvia and the ability to attract external financing, investing in human resources and infrastructure” of the Operational Programme “Growth and Employment” (No. 1.1.1.2/VIAA/1/16/157).
FeOOH-modified clay sorbents for arsenic removal from aqueous solutions
2019
The presence of arsenic (As) in natural and anthropogenic soils causes severe pollution of groundwater due to its harmful carcinogenic effects. The present work describes the research activities for searching of appropriate innovative sorbents based on clay material for As sorption using iron oxy-hydroxide modification. Natural and manufactured clay was chosen for comparison of modification efficiency in order to obtain best sorption results for As(V). The results of pilot testing were obtained and the sorption was studied as a function of initial arsenic concentration. Obtained results indicate that modification of clay with Fe compounds significantly improves the sorption capacity of a ne…
Inorganic nanomaterials in the aquatic environment: behavior, toxicity, and interaction with environmental elements
2016
AbstractThe aim of this paper is to present characteristics, toxicity and environmental behavior of nanoparticles (NPs) (silver, copper, gold, zinc oxide, titanium dioxide, iron oxide) that most frequently occur in consumer products. In addition, NPs are addressed as the new aquatic environmental pollutant of the 21stcentury. NPs are adsorbed onto particles in the aquatic systems (clay minerals, fulvic and humic acids), or they can adsorb environmental pollutants (heavy metal ions, organic compounds). Nanosilver (nAg) is released from consumer products into the aquatic environment. It can threaten aquatic organisms with high toxicity. Interestingly, copper nanoparticles (Cu-NPs) demonstrate…
The measurement of impurities in silicon for solar cell production
2012
The power conversion efficiency of solar cells is largely dependent on impurity levels in silicon. In the current investigations two sample preparation methods of silicon had been used before analysis - acid dissolution at atmospheric pressure and pressured microwave assisted technique. Quantification of impurities in solar silicon was done by inductively coupled plasma mass spectrometry and electrothermal atomic spectrometry. Microwave assisted dissolution of solar silicon was more effective compared to the traditional dissolution method on the hot plate, but complete dissolution of impurities and silicon matrix was achieved with a nitric and hydrofluoric acid mixture. The mass of solar si…
Gelation of semiflexible polyelectrolytes by multivalent counterions
2012
Filamentous polyelectrolytes in aqueous solution aggregate into bundles by interactions with multivalent counterions. These effects are well documented by experiment and theory. Theories also predict a gel phase in isotropic rodlike polyelectrolyte solutions caused by multivalent counterion concentrations much lower than those required for filament bundling. We report here the gelation of Pf1 virus, a model semiflexible polyelectrolyte, by the counterions Mg(2+), Mn(2+) and spermine(4+). Gelation can occur at 0.04% Pf1 volume fraction, which is far below the isotropic-nematic transition of 0.7% for Pf1 in monovalent salt. Unlike strongly crosslinked gels of semiflexible polymers, which stif…
A kinetic study of the basic hydrolysis of 2-phenylethyl nitrite in the presence of borate buffer and β-cyclodextrin
2002
The kinetics of the hydrolysis of 2-phenylethyl nitrite have been studied in basic aqueous solutions (borate buffer) in the absence and presence of β-cyclodextrin. The observed kinetic trends show that the hydrolysis reaction consists of at least three subsequent processes. The first is a fast acid-base reaction between the boron atom of boric acid and oxygen atom of the alkyl nitrite. The second one should be the nucleophilic attack of hydroxyl ion on the alkyl nitrite. The last process could be referred to as a combination of transfer of hydrogen acid to a water molecule followed by ruptures of nitrogen-oxygen and boron-oxygen bonds. The effect of β- cyclodextrin on each process is also d…