Search results for "solution"
showing 10 items of 5638 documents
Fourier transform infrared determination of Fluometuron in pesticide formulations
2003
Abstract A single method has been developed for Fourier transform infrared (FTIR) determination of Fluometuron in pesticide formulations. Samples were ultrasonically shaken with CHCl3 for 5 min and the FTIR spectra of sample extracts and standards were obtained at a nominal resolution of 4 cm−1 from 4000 to 900 cm−1 accumulating 25 scans. Fluometuron determination is based on the measure of peak area from 1342 to 1321 cm−1 corrected using a baseline defined from 1352 to 1294 cm−1. This procedure provided a limit of detection of 6.5 μg g−1, a sensitivity of 0.852 a.u. g mg−1 for a pathlength of 0.11 mm, a relative standard deviation of 1.6% for three analysis of a sample containing 50.4% (w/…
In situ derivatization for double confirmation of 2C–C in oral fluids by ion mobility spectrometry
2017
Ion mobility spectrometry (IMS) is a powerful tool to carry out quick and sensitive detection of illicit activities and has been employed for the determination of the psychedelic drug 2,5-dimethoxy-4 chlorophenethylamine (2C–C) in oral fluid samples. Saliva samples were extracted with chloroform and analysed by IMS reaching a limit of detection (LOD) of 14 μg L−1. Nevertheless, IMS has a scarce resolution and selectivity of the method can be often compromised by the presence of potential interferents with similar molecular weights and drift times. Thus, a rapid and in situ derivatization with acetone, to form the corresponding imine, has been proposed in the present study to confirm the pre…
Improved detection limit for ammonium/ammonia achieved by Berthelot's reaction by use of solid-phase extraction coupled to diffuse reflectance spectr…
2005
Abstract The proposed procedure is based on the extraction of the indothylmol blue into C 18 solid-phase extraction (SPE) membranes and direct quantification on the membrane surface by diffuse reflectance spectroscopy. The analytical performance of the proposed method has been evaluated for standard solutions of ammonium using reflectance values, R , as well as the Kubelka–Munk function, F ( R ). The results have been compared with those obtained by the conventional method, which uses UV–vis absorption spectroscopy with a sensor-based method. The described methodology provided satisfactory linearity and reproducibility within the ammonium concentration intervals 25–250 μg L −1 and 25–500 μg…
Direct injection of edible oils as microemulsions in a micellar mobile phase applied to the liquid chromatographic determination of synthetic antioxi…
1999
Abstract A simple and quick procedure for analysis of hydrophobic samples by direct injection in a liquid chromatograph, without previous extraction, has been developed. The sample is solved in a water/sodium dodecyl sulphate/n-pentanol microemulsion without destroying the microemulsion structure, and injected. A micellar mobile phase containing 0.1 M SDS, 2.5% n-propanol and 10 mM phosphate of pH 3 is used. The procedure is applied to the determination of synthetic antioxidants (propyl gallate, tert-butylhydroquinone, 2,4,5-trihydroxybutyrophenone, nordihydroguaiaretic acid, octyl gallate, 3-tert-butyl-4-hydroxyanisole and dodecyl gallate) in sunflower, corn and olive oils. Linear calibrat…
Identification of Leguminosae gums and evaluation of carob-guar mixtures by capillary zone electrophoresis of protein extracts.
2002
A procedure for the extraction and capillary zone electrophoresis (CZE) separation of proteins from carob, guar and tara gums in a background electrolyte (BGE) of pH 9 containing 0.1% polyvinyl alcohol is described. The CZE protein profiles exhibit characteristic peaks for each one of the Leguminosae gums, which can be used to construct models capable of identifying samples of carob, guar and tara gums, and predicting the guar content in binary carob-guar mixtures of different geographical origin and harvested in different years. The classification and prediction models are constructed by using linear discriminant analysis (LDA) and multiple linear regression (MLR), respectively. An excelle…
Novel approach for the determination of azithromycin in pharmaceutical formulations by Fourier transform infrared spectroscopy in film-through transm…
2013
Abstract This work reports the development of a new method for the determination of azithromycin in pharmaceutical formulations employing Fourier transform infrared (FTIR) technique. The measurements were performed using a novel approach based on a film-through transmission mode. Several variables that could influence the analytical performance of the method were evaluated (solvent, nominal resolution, number of scans, mode of measurement and spectral region selected for measurement). Acetonitrile was the best solvent for the determination of azithromycin, employing the absorption band of the C O group at 1729 cm− 1. The extraction of azithromycin from the formulations was made by mechanica…
Uptake and translocation monitoring of imidacloprid to chili and tomato plants by molecularly imprinting extraction - ion mobility spectrometry
2019
Abstract The degradation of imidacloprid in soil and its uptake and translocation to chili and tomato plants was evaluated, as a proof of concept, of the possibilities of the combination of molecularly imprinted polymers (MIPs) and ion mobility spectrometry (IMS) for a fast and sensitive bioprocesses monitoring tool. To do it, a method based on the selective extraction of imidacloprid from soil and plant materials was developed. In the selected conditions, the MIP-IMS procedure provided a recovery of imidacloprid in soil and plant samples from 102 to 114%, for spiked concentration levels from 0.2 to 2.0 μg g−1. Precision of the methodology, expressed as the relative standard deviation (RSD)…
Fourier transform infrared determination of imidacloprid in pesticide formulations
2004
A simple method has been developed for Fourier Transform Infrared (FTIR) determination of Imidacloprid in pesticide formulations. Samples were diluted with CHCl3 and the FTIR spectra of samples and standards were obtained at a nominal resolution of 4 cm-1 from 4000 to 900 cm-1 accumulating 25 scans. Imidacloprid determination was based on the measure of either peak area from 1577 to 1567 cm-1 or peak height at 1572 cm-1, both corrected using a horizontal baseline defined at 1900 cm-1. The limits of detection achieved, of the order of 9 µg g-1, were appropriate for the determination of Imidacloprid in commercially available formulations. FTIR results were statistically comparable to those fo…
Development of a simple and low cost device for vapour phase Fourier Transform Infrared spectrometry determination of ethanol in mouthwashes
2006
Abstract A new vapour phase manifold coupled with Fourier Transform Infrared (FTIR) spectroscopy was developed for ethanol determination in mouthwashes. Two microliters of samples were injected, without any previous pre-treatment into a reactor heated at 70 °C, and the vapour phase generated transported to the FTIR spectrometer using a carrier nitrogen flow of 6 ml min−1. FTIR spectra were continuously recorded, as a function of time, by accumulating two scans and employing 8 cm−1 nominal resolution. Analytical measurements for ethanol were made in the range from 1130 to 992 cm−1 with a baseline defined between 1158 and 957 cm−1. After ethanol measurement the carrier flow was increased to 3…
FT–Raman spectrometry determination of Malathion in pesticide formulations
2003
Abstract A fast and environmentally friendly method has been developed for Fourier transform–Raman (FT–Raman) spectrometry determination of Malathion in pesticide emulsifiable concentrate formulations. The method is based on the measurement of intensity peak height values at 1737 cm −1 Raman shift corrected using a baseline defined at 1900 cm −1 . Samples were diluted with CHCl 3 and the FT–Raman spectra collected in back-scattering mode over 3.3 min at a nominal resolution of 4 cm −1 accumulating 50 scans per spectra and using a laser power of 1250 mW. The developed procedure provided a limit of detection of 1.8% w/w in the original sample. Results found by FT–Raman spectrometry were stati…