Search results for "sorbents"
showing 9 items of 19 documents
Untreated Opuntia ficus indica for the Efficient Adsorption of Ni(II), Pb(II), Cu(II) and Cd(II) Ions from Water
2023
The raw cladode of Opuntia ficus indica (OFI) was evaluated as a sustainable biosorbent for the removal of heavy metals (Ni, Pb, Cu, and Cd) from aqueous solutions. The functional groups of OFI were identified by employing DRIFT-FTIR and CP-MAS-NMR techniques before and after contact with the ions in an aqueous media, showing a rearrangement of the biomass structure due to the complexation between the metal and the functional groups. The adsorption process was studied in both single- and multi-component systems under batch conditions at different pHs (4.0, 5.0, and 6.0), different metal concentrations, and different biomass amounts. The results show that the raw OFI had a removal capacity a…
Trace analysis by ion mobility spectrometry: From conventional to smart sample preconcentration methods. A review.
2018
Ion mobility spectrometry (IMS) is a rapid and high sensitive technique widely used in security and forensic areas. However, a lack of selectivity is usually observed in the analysis of complex samples due to the scarce resolution of the technique. The literature concerning the use of conventional and novel smart materials in the pretreatment and preconcentration of samples previous to IMS determinations has been critically reviewed. The most relevant strategies to enhance selectivity and sensitivity of IMS determinations have been widely discussed, based in the use of smart materials, as immunosorbents, aptamers, molecularly imprinted polymers (MIPs), ionic liquids (ILs) and nanomaterial. …
Selection of sampling adsorbents and optimisation and validation of a GC-MS/MS method for airborne pesticides
2017
ABSTRACTA methodology for the sampling and determination of airborne pesticides has been developed. The trapping efficiency of three adsorbents, namely XAD-2,XAD-4 and a sandwich sorbent (PUF-XAD2-PUF), was tested for 34 pesticides and the latter was selected because it presented the highest retention capacity without breakthrough. Pesticides were determined by gas chromatography coupled to an ion trap mass spectrometer in tandem. The method showed recoveries ranging from 70% to 120% with limits of quantification in the range of 16.1–322.6 pg m−3 when 155 m3 were sampled. This analytical strategy was applied to 10 indoor air samples collected in dwellings from the Valencian Region. Six pest…
Sewage Sludge Derived Materials for CO2 Adsorption
2021
The study tried to contribute to solving two serious environmental issues: CO2 reducing and sewage sludge disposal. Thus, sewage-sludge-derived materials were obtained in order to be evaluated for CO2 adsorption capacity. Therefore, the char resulted after the sewage sludge pyrolysis was subjected to oxidation and chemical activation processes by using different quantities of alkaline hydroxide. One of the obtained materials, activated with a lower quantity of alkaline hydroxide, was also treated with acid chloride. Further, the materials were structural and texturally characterized, and material treated with acid chloride was used for CO2 adsorption tests, due to high surface area and pore…
Modern trends in solid phase extraction: New sorbent media
2016
Abstract Based on the recently published literature, this review provides an update of the most important features and application of formats and devices employed in solid phase extraction (SPE). Special attention was paid on new trapping media proposed in SPE prior the chromatography analysis, based on the use of nanostructured materials, including carbon nanomaterials, electrospun nanofibers, dendrimes and magnetic nanoparticles, molecular recognition sorbents, as aptamers, immunosorbents, molecular imprinted polymers, ion imprinting polymers, metal-organic frameworks and restricted access materials. Discussions on the present limitations as well as expected future trends of the new trapp…
Computational modeling of molecularly imprinted polymers as a green approach to the development of novel analytical sorbents
2018
Abstract The development of novel molecularly imprinted polymers (MIP) sorbents for specific chemical compounds require a lot of tedious and time-consuming laboratory work. Significant quantities of solvents and reagents are consumed in the course of the verification of appropriate configurations of polymerization reagents. Implementation of molecular modeling in the MIP sorbent development process appears to provide a solution to this problem. Appropriate simulations and computations facilitate the determination of the nature of interaction between the reagents and thus the selection of the best configuration of chemicals for the preparation of the sorbent. The article presents literature …
Sorbenty i membrany polimerowe w analizie środowiskowej
2003
Zwiększające się zanieczyszczenie środowiska wynikające z działalności człowieka, powoduje konieczność stałego jego monitorowania, a tym samym poszukiwania efektywnych i czułych metod analizy. Istotnym elementem wszystkich procedur analitycznych, a szczególnie w analizie substancji występujących w wieloskładnikowych skomplikowanych mieszaninach, jest wstępne wydzielenie, oczyszczenie i zatężenie próbki. Do tego celu, w ostatnim czasie, coraz częściej używa się sorbentów polimerowych lub układów membranowych. W niniejszym przeglądzie przedstawiono najważniejsze metody przygotowania próbek środowiskowych do analizy: ekstrakcję na fazie stałej (SPE) oraz procesy membranowe.
Sorption of V and VI group metalloids (As, Sb, Te) on modified peat sorbents
2016
AbstractThe present work investigates arsenic, antimony and tellurium sorption using iron modified peat. The results were obtained using batch tests and the sorption was studied as a function of initial metalloid concentration, pH and sorption time, as well as the presence of competing substances. The obtained results indicate that modification of peat with Fe compounds significantly enhances the sorption capacity of the sorbents used for sorption of arsenic, antimony and tellurium. The optimal pH interval for the sorption of Sb(III) is 6.5–9 and for As(V) and Sb(V) – 3–6, while As(III) and tellurium sorption using Fe-modified peat is favourable in a wider interval of 3–9. The presence of c…
V un VI grupas metaloīdu sorbcijas izpēte uz modificētiem biomateriālu sorbentiem
2015
Promocijas darbā veikta augstas pievienotās vērtības sorbentu izstrāde, izmantojot vienu no Latvijas nozīmīgākajiem vietējiem derīgajiem izrakteņiem, un pētītas to izmantošanas iespējas. Promocijas darbā sintezēti sorbenti, kuru pamatā ir biomateriāli, kas modificēti ar dzelzs savienojumiem. Izvērtētas kūdras kā sorbenta izmantošanas iespējas, kā arī pētītas kūdras modificēšanas metodes un to ietekme uz sorbcijas kapacitāti. Bez kūdras izmantoti arī tādi materiāli kā sūnas, skaidas, salmi, niedres, humīnskābes un salīdzinājumam arī smiltis, kas arī modificēti ar dzelzs savienojumiem. Sintezētie sorbenti raksturoti, izmantojot skenējošo elektronmikroskopiju (SEM), Furjē tanformācijas infrasa…