Search results for "specific surface area"
showing 10 items of 123 documents
Controlled release using mesoporous materials containing gate-like scaffoldings.
2009
The use of gated mesoporous silica solids as suitable systems for controlled-release protocols is reviewed. These materials are based on mesoporous silica supports that can be prepared with tailor-made pores of around 2 - 10 nm and that show a very large specific surface area (up to 1200 m(2)/g), thus having a large load capacity. The solids can be additionally functionalised in the external surface with gate-like systems that can be opened on command to allow cargo release. Light, redox reactions, pH, temperature, polarity and enzyme-driven protocols are shown. The possible application in drug delivery protocols is discussed.
Carbon-doped titania as a precursor for titanate nanotubes
2018
Carbon-doped titania was fabricated via carbothermal treatment in nitrogen–acetylene gas flow and further used as a precursor for multiwalled titanate nanotube (TNT) synthesis via alkaline hydrothermal route. Investigation of the reaction products after hydrothermal treatment of carbon-doped titania using Transmission electron microscopy, X-ray diffraction, and Brunauer–Emmett–Teller method shows the successful formation of TNTs. The presence of carbon was proved although the type of incorporation could not be certified. All samples show approximately the same carbon content before and after hydrothermal treatment. An increasing pretreatment temperature of titania precursor powders yields m…
On the difficulty of assessing the specific surface area of magnesium stearate
2001
Abstract The water content of as-received commercial magnesium stearate batches from animal and vegetable sources have been modified by ageing in humid air at room temperature or by vacuum treatment. The complete adsorption–desorption isotherms of nitrogen and krypton vapours by samples of these as received and modified materials have been measured at liquid nitrogen temperature after standardised vacuum degassing. They are greatly affected by the initial water content of the material. In particular: (a) the BET surface area values computed from the adsorption branch vary widely and is increasing with increasing water content; (b) anomalous hysteresis of varying amplitude is observed in all…
Preparation and photoactivity of nanostructured TiO2 particles obtained by hydrolysis of TiCl4
2005
This work reports the preparation of nanostructured polycrystalline TiO2 photocatalysts obtained by hydrolysis of TiCl4 in very mild conditions. Several samples were prepared as suspensions or colloidal dispersions by using TiCl4/H2O volume ratios ranging between 1:1 and 1:100. The samples were characterised by X-ray diffraction analysis, specific surface area determination, diffuse reflectance spectroscopy and scanning electron microscopy. 4-Nitrophenol photodegradation was used as probe reaction to test the photoactivity of the catalysts. Some samples revealed a photoactivity higher than that of Degussa P25 in similar experimental conditions and the most photoactive one was that prepared …
Planning of gravimetric investigations on mars
2004
We propose to install a balance at the surface of Mars. In this paper we present a survey on tasks which could be accomplished by means of a balance. The determination of the specific surface area and porosity of Martian soil and other sorption experiments are discussed. Criteria for the choice of a suitable balance type are given.
X-ray CT analyses, models and numerical simulations: a comparison with petrophysical analyses in an experimental CO<sub>2</sub&a…
2016
Abstract. An essential part of the collaborative research project H2STORE (hydrogen to store), which is funded by the German government, was a comparison of various analytical methods for characterizing reservoir sandstones from different stratigraphic units. In this context Permian, Triassic and Tertiary reservoir sandstones were analysed. Rock core materials, provided by RWE Gasspeicher GmbH (Dortmund, Germany), GDF Suez E&P Deutschland GmbH (Lingen, Germany), E.ON Gas Storage GmbH (Essen, Germany) and RAG Rohöl-Aufsuchungs Aktiengesellschaft (Vienna, Austria), were processed by different laboratory techniques; thin sections were prepared, rock fragments were crushed and cubes of …
Agglomerated non-porous silica nanoparticles as model carriers in polyethylene synthesis
2004
Abstract Non-porous submicron silica particles (250 and 500 nm) with high monodispersity were agglomerated to form spherical agglomerates via spray drying. As a binder, 25 nm sized monodisperse silica spheres were selected from a variety of colloidal systems including Levasil-type and Aerosil-type silica nanoparticles. The use of such binders led to an increase of the specific surface area of the agglomerated carriers. All materials were characterised by nitrogen sorption, mercury intrusion and scanning electron microscopy. The silica agglomerates, with highly defined geometrical and pore structural parameters, were employed as model carriers in the heterogeneous polymerization of ethylene …
Preparation, Characterization and Photocatalytic Activity of TiO2 Impregnated with the Heteropolyacid H3PW12O40: Photo-assisted Degradation of 2-prop…
2009
Abstract Both commercial and home prepared TiO2 samples impregnated with tungstophosphoric acid (H3PW12O40) were prepared and used for the photo-assisted degradation of 2-propanol in gas–solid regime. The characterization results evidenced a good coverage of the polyoxometalate (POM) onto the surface of both types of TiO2 samples along with a marginal effect of the presence of ethanol or HCl during the POM impregnation step on the specific surface area, porosity, morphology, crystallinity and acidity of the samples. Propene was the main intermediate product found in 2-propanol photocatalytic degradation by using the samples containing POM as the photocatalyst, whereas propanone was mainly o…
Enhanced photocatalytic performance of novel electrospun BN/TiO 2 composite nanofibers
2017
International audience; High activity boron nitride/titanium dioxide (BN/TiO2) composite nanofiber photocatalysts were synthesized for the first time via the electrospinning technique. The as-spun nanofibers with a controlled ratio of boron nitride nanosheets (BN) were calcined under air at 500 °C for 4 hours. Their morphological, structural and optical properties were studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), BET surface area, Fourier-transform infrared (FTIR), Raman spectroscopy, UV-Visible spectrophotometry and room temperature photoluminescence (PL). The effect of loading different BN sheet amounts on the photocat…
Comments on surface structure analysis by water and nitrogen adsorption
2004
Specific surface area and pore size distribution are determined usually from adsorption isotherms at low temperatures using nitrogen or noble gases. These are not absolute parameters and the measuring methods are fraught with serious difficulties. General problems of sorption measurements and recent developments are discussed. To obtain information for practical purposes these measurements need to be supplemented by investigations of the sorbate/sorbent system used in practice. Results of the measurement of nitrogen and water vapour adsorption on different materials are compared.