Search results for "strength"
showing 10 items of 2415 documents
Thermal-electrical-mechanical simulation of the nickel densification by Spark Plasma Sintering. Comparison with experiments
2016
Abstract Spark Plasma Sintering is a non-conventional process of the powder metallurgy field which uses a high electrical current to rapidly produce fully dense materials. In the present paper, a thermal-electrical-mechanical model developed on ABAQUS Software is proposed to simulate the densification of a nickel disk. A compaction model, studied in [Wolff, C., Mercier, S., Couque, H., Molinari, A., 2012. Modeling of conventional hot compaction and spark plasma sintering based on modified micromechanical models of porous materials. Mechanics of Materials 49 (0), 72–91. URL http://www.sciencedirect.com/science/article/pii/S0167663611002195 ], has been used to reproduce the densification of t…
Friction Stir Welding of Magnesium Alloys under Different Process Parameters
2010
Experimental and numerical investigations have been performed in order to study the effect of welding parameters on properties of FSW-ed AZ31 magnesium alloy sheets. The results, presented in terms of tensile strength and numerical field variables distributions, allow to understand the behaviour of such material when FSW-ed using different rotational and welding speeds for a given tool geometry.
The Magnetic Properties of Electrical Pulses Delivered by Deep-Brain Stimulation Systems
2020
The aim of this article is to analyze the magnetic field properties for both the monopolar and bipolar electrode configurations of deep-brain stimulation electrodes using 3-D magnetic field measurements and to investigate if the magnetic measurements enable a localization of the electrode as a proof of concept. Therefore, a simplified head phantom with an integrated deep-brain stimulation electrode was created to measure the magnetic flux densities in all the three dimensions with a fluxgate magnetometer over a sensor trajectory of measuring points inside the magnetically shielded chamber. The magnitude of the magnetic flux density for monopolar stimulation and bipolar stimulation is in the…
Paper-reinforced biomimetic cellular structures for automotive applications
2009
The aim of this work was to make and test some sandwich structures, made of biomimetic cellular cores of recycled paper. In a preliminary study some paper laminates were investigated. Then two different kinds of cores were made by simple processes, according to two natural structures (i.e. feather and honeycomb). To evaluate the mechanical properties of these new sandwiches, static flexural, flatwise and edgewise compression tests were performed.
Study of Snowboard Sandwich Structures
2005
The aim of the present research is to extend the knowledge of mechanical properties both on single components and on complete structure employed for snowboard. Flexural and torsion tests are performed to acquire important comparison parameters between snowboard sandwich structures that differ for the core material employed (wood, PVC foam core). A simplified FEM model is proposed to simulate the flexural tests of the sandwich structure showing good predictive capability.
Prediction of crack onset strain in composite laminates at mixed mode cracking
2009
Failure process of continuous fiber reinforced composite laminates in tension usually starts with appearance of intralaminar cracks. In composite laminates with complex lay-ups and/or under combined loading, intralaminar cracks may develop in plies with different reinforcement directions. A necessary part of mixed mode cracking models is the criterion of failure. For propagation-controlled fracture it is usually formulated in terms of energy release rates and their critical values of the particular composite material. Intralaminar fracture toughness of unidirectionally reinforced glass/epoxy composite was experimentally determined at several mode I and mode II ratios. It is found that the c…
The effect of different force magnitudes for placement of orthodontic brackets on shear bond strength, in three adhesive systems.
2018
Background: Amount of pressure exerting on orthodontic brackets during bonding can create different thickness of adhesive and affect shear bonding strength(SBS) in different adhesive systems. The purpose of this study was to evaluate the effect of different force magnitudes for placement of brackets on SBS. Material and Methods: In an in vitro study, 420 brackets were placed on the bovine teeth, using three types of adhesives, Concise (chemically cured two-paste mix), Unite (chemically cured no mix), and Transbond XT( light cured), with the application of seven force magnitudes of 50, 100, 200, 300, 400, 600 and 1000 grams in twenty-one groups of twenty samples each. SBS means (using two-wa…
Analogy between the effects of a mechanical and chemical perturbation on the conductivity of passive films
2002
Abstract In order to study the passivity breakdown of a type 316L stainless steel, the electrochemical impedance and surface stresses were measured under straining conditions. The Mott–Schottky analysis, performed at high frequency, appears as very useful method to study, below the apparent yield strength, the effects of a mechanical stress on the capacitance values. The results obtained in sodium chloride media indicate that the semiconducting properties of passive films formed in a tensile stress field reflect a higher vacancies concentration than those formed in a stress-free state, suggesting that the passive film conductivity is increased. It was also shown that the Mott–Schottky plots…
Molecular-dynamics study of mechanical properties of copper
1998
Mechanical properties of copper have been studied using effective-medium theory and Molecular-Dynamics simulations. At room temperature we calculate the tensile moduli of systems that are elongated along different crystal orientations. These moduli are in very good agreement with the experimental values, the difference being less than 6%. The elastic constants obtained from simulations were also in good agreement with experiments. In addition, the point of maximum stress is found to be of the same order of magnitude as the experimental value. Also crack propagation in systems with periodic boundaries has been studied and micro-voids are seen to generate near the crack tip. Crack propagation…
Coded excitation speeds up the detection of the fundamental flexural guided wave in coated tubes
2016
The fundamental flexural guided wave (FFGW) permits ultrasonic assessment of the wall thickness of solid waveguides, such as tubes or, e.g., long cortical bones. Recently, an optical non-contact method was proposed for ultrasound excitation and detection with the aim of facilitating the FFGW reception by suppressing the interfering modes from the soft coating. This technique suffers from low SNR and requires iterative physical scanning across the source-receiver distance for 2D-FFT analysis. This means that SNR improvement achieved by temporal averaging becomes time-consuming (several minutes) which reduces the applicability of the technique, especially in time-critical applications such as…