Search results for "substrate"
showing 10 items of 1018 documents
Curvature radius measurement by optical profiler and determination of the residual stress in thin films
2019
Abstract The Stoney formula, based on the measurement of the substrate curvature, is often used for the determination of the thin films' residual stress. In this study, titanium nitride coatings were deposited by DC reactive magnetron sputtering on silicon substrates. An optical profiler was used to determine the curvature of the surface before and after coating. Two radii were then obtained, along the principal perpendicular directions of the surface curvature. A simple and efficient method to determine the experimental error on the stress calculation was developed taking into account the film thickness dispersion and the radii dispersion. Using constant deposition parameters, some samples…
Mammalian cell growth on gold nanoparticle-decorated substrates is influenced by the nanoparticle coating
2014
In this work, we study epithelial cell growth on substrates decorated with gold nanorods that are functionalized either with a positively charged cytotoxic surfactant or with a biocompatible polymer exhibiting one of two different end groups, resulting in a neutral or negative surface charge of the particle. Upon observation of cell growth for three days by live cell imaging using optical dark field microscopy, it was found that all particles supported cell adhesion while no directed cell migration and no significant particle internalization occurred. Concerning cell adhesion and spreading as compared to cell growth on bare substrates after 3 days of incubation, a reduction by 45% and 95%, …
X-ray multiple diffraction in the characterization of TiNO and TiO2 thin films grown on Si(001)
2006
Abstract TiO 2 and TiN x O y thin films grown by low pressure metal-organic chemical vapor deposition (LP-MOCVD) on top of Si(0 0 1) substrate were characterized by X-ray multiple diffraction. X-ray reflectivity analysis of TiO 2 [1 1 0] and TiNO[1 0 0] polycrystalline layers allowed to determine the growth rate (−80 A/min) of TiO 2 and (−40 A/min) of TiNO films. X-ray multiple diffraction through the Renninger scans, i.e., ϕ -scans for (0 0 2)Si substrate primary reflection is used as a non-conventional method to obtain the substrate lattice parameter distortion due to the thin film conventional deposition, from where the information on film strain type is obtained.
Wetting behavior of solid hydrogen films
1996
We have studied the dewetting of quench-condensed solid hydrogen films on bare and Ne plated Ag substrates. Information about the morphology of the films during the dewetting process is obtained from measurements of photoelectron tunneling through the films and complementary surface plasmon resonance data. Plating the Ag substrate with Ne films of various thickness allows to tune the strength of the van der Waals interaction with the hydrogen and thus to change the H2 films from a state of incomplete to complete wetting.
Substrate templating upon self-assembly of hydrogen-bonded molecular networks on an insulating surface.
2012
M olecular self-assembly on insulating surfaces, despite being highly relvant to many applications, generally suffers from the weak molecule–surface interactions present on dielectric surfaces, especially when benchmarked against metallic substrates. Therefore, to fully exploit the potential of molecular self-assembly, increasing the infl uence of the substrate constitutes an essential prerequisite. Upon deposition of terephthalic acid and trimesic acid onto the natural cleavage plane of calcite, extended hydrogen-bonded networks are formed, which wet the substrate. The observed structural complexity matches the variety realized on metal surfaces. A detailed analysis of the molecular struct…
Gas sensitive luminescence of ZnO coatings obtained by plazma electrolytic oxidation
2015
Abstract The ZnO coatings on Zn substrate were obtained using plasma electrolytic oxidation method. The XRD and SEM methods were used for structural and morphological characterization of obtained coatings. The luminescence of ZnO coatings were studied and compared with luminescence characteristics of ZnO single crystal. It is shown that luminescence intensity in ZnO defect band depends on oxygen concentration in ambient atmosphere. The effect is of interest for oxygen sensing based on ZnO coating luminescence.
Evaluation of interfacial stress transfer efficiency by coating fragmentation test
2007
Probabilistic model of coating fragmentation under uniaxial tensile loading is developed. Analytical expressions of the crack spacing evolution are obtained for small-strain and large-strain fragmentation regimes. The model is applied for coating and interface property identification of several thin brittle coating/polymer substrate systems. An estimate of the stress transfer length, derived from the fragmentation data, is found to correlate with the interfacial shear strength thus suggesting that both parameters reflect an intrinsic property related to the mechanical efficiency of coating/substrate interface.
Elastic Superhydrophobic and Photocatalytic Active Films Used as Blood Repellent Dressing.
2020
Durable and biocompatible superhydrophobic surfaces are of significant potential use in biomedical applications. Here, a nonfluorinated, elastic, superhydrophobic film that can be used for medical wound dressings to enhance their hemostasis function is introduced. The film is formed by titanium dioxide nanoparticles, which are chemically crosslinked in a poly(dimethylsiloxane) (PDMS) matrix. The PDMS crosslinks result in large strain elasticity of the film, so that it conforms to deformations of the substrate. The photocatalytic activity of the titanium dioxide provides surfaces with both self-cleaning and antibacterial properties. Facile coating of conventional wound dressings is demonstra…
Flexible light-emitting electrochemical cells with single-walled carbon nanotube anodes
2016
Abstract In this work, we demonstrate flexible solution processed light emitting electrochemical cells (LECs) which use single-walled carbon nanotubes (SWCNTs) films as the substrate. The SWCNTs were synthesized by an integrated aerosol method and dry-transferred on the plastic substrates at room temperature. The addition of a screen printed poly (3,4-ethylene dioxythiophene) doped with poly (styrene sulfonate) (PEDOT:PSS) film onto the nanostructured electrode further homogenizes the surface and enlarges the work function, enhancing the hole injection into the active layer. By using an efficient phosphorescent ionic transition metal complex (iTMC) as the active material, efficacies up to 9…
Structural, electronic, and magnetic properties of pseudomorphic CrFe nanostripes on W(110)
2007
We have grown pseudomorphic binary ${\mathrm{Cr}}_{1\ensuremath{-}x}{\mathrm{Fe}}_{x}$ alloy monolayers and sequences of Cr and Fe nanostripes on W(110) by molecular-beam epitaxy in ultrahigh vacuum. By coadsorption of Cr and Fe a pseudomorphic random CrFe alloy grows on the W(110) substrate. At a substrate temperature of $700\phantom{\rule{0.3em}{0ex}}\mathrm{K}$ the CrFe alloy forms monolayer stripes in the step flow growth mode. We have measured magnetic properties of the monolayer alloy for $0.75\ensuremath{\leqslant}x\ensuremath{\leqslant}1$ using Kerr magnetometry. At a constant relative temperature $t=T∕{T}_{C}$ the saturation value of the Kerr rotation shows a maximum at $x=0.95$ an…