Search results for "surface layer"
showing 10 items of 72 documents
Positron Annihilation Study of Defects Induced by Various Cutting Methods in Stainless Steel Grade 304
2011
We report in this article the comparison of the subsurface zones (SZs) in austenitic stainless steel 304 samples created by three cutting techniques, i.e., the laser cutting (LC), abrasive water jet (AWJ), and traditional milling cutting (MC). The crystal lattice defects distribution in this zone were investigated using the positron annihilation method. It was shown that the MC creates the great number mainly edge dislocations decorated by vacancies. Their concentration decreases with the increase of the depth from the cut surface. The total depth of the SZ is extended up to 150 μm from the cut surface. Similar dependency was observed for the AWJ machining but the total depth is much lower,…
Hardening of Steel Perforated Tape by Nd:YAG Laser
2016
One of the directions of application of the perforated metal material is their use as cutting elements in the production of processing tools. In this case it is necessary to carry out hardening of cutting surfaces to increase their hardness. One of the methods of hardening metals could be laser treatment. Therefore, the present work is a study of the effect of Nd:YAG laser radiation on the microstructure and hardness of fragments formed from steel perforated tape. Different laser scan speeds (doses) were used in the experiments. The results have shown that the increase the microhardness of 30-40% after the laser treatment of steel perforated tape in the surface layer in a depth range up to …
Near-field scanning optical microscopy to study nanometric structural details of LiNbO3 Zn-diffused channel waveguides
2008
A near-field scanning optical microscope (NSOM) is used to perform structural and optical characterization of the surface layer after Zn diffusion in a channel waveguide fabricated on lithium niobate. A theoretical approach has been developed in order to extract refractive index contrast from NSOM optical transmission measurements (illumination configuration). As a result, different solid phases present on the sample surface can be identified, such as ZnO and ZnNb2O6. They appear like submicrometric crystallites aligned along the domain wall direction, whose origin can be ascribed to some strain relaxation mechanism during the annealing process after Zn diffusion. Jose.Canet-Ferrer@uv.es
Phase Composition and Nanoporous Structure of Core and Surface in the Modified Granules of NH4NO3
2018
The article deals with the study of phase composition and crystal nanoporous structure of core and surface layer of porous ammonium nitrate (PAN). The research results, presented in the article, show that the proposed way to generate PAN allows to provide the granule porous structure without changing of its phase composition. The crystal structure of granules after the humidification and heat treatment has some changes due to the increase of the number of pores. The change of crystal structure, in turn, allows to open access to nanopores that are located in the volume of granules. This allows to increase the holding capacity indicator of granules. An important result of conducted researches…
Measurements of Positrons Lifetimes in Corroded Nickel
1999
It is over twenty years now that the nuclear method of conducting investigations into defects in the volume and on the surface of solids, based on positron annihilation phenomenon, has been developing on a quite intensive scale [1-3]. The present work is an attempt at adopting positron annihilation to investigations of the phenomenon of pitting corrosion in metals. Pitting occurs mainly in environments containing chlorides and affects metals and alloys covered with passivating oxide layers. Research carried out for many years by the use of various methods . has proved that pittings, which could — after some time — take sizes as large as the tenth of the millimeter order, are formed in the p…
Influence of sulphite on the passivation of iron
1991
Abstract Mossbauer spectroscopy and electrochemical measurements were used to study the passivation of iron and steels in a sulphite containing solution. The potentiodynamic curves show that passivation occurs at −140 mV potential vs saturated calomel electrode ( sce ). The main phase of the passive layer was found to be γ-FeOOH, while FeSO 4 ·H 2 O on the surface and FeSO 3 ·3H 2 O inside the layer were identified as minor phases in the case of polarization in a solution of pH 3.37. Only γ-FeOOH was observed on the surface of samples polarized at pH 6.6.
Electrochemical impedance spectroscopy for studying passive layers on steel rebars immersed in alkaline solutions simulating concrete pores
2007
Present paper deals with the use of the electrochemical impedance spectroscopy to identify different processes in the passive layer growth over steel rebar surface immersed in an alkaline media simulating the concrete pore solution. Two cases have been considered: a passive layer spontaneously grown in a high alkaline media and a passive layer assisted by the application of an anodic potential in the same media. The application of electric equivalent circuits allows distinguishing between the different mechanisms occurring in this passive layer when grows in different conditions. An electric equivalent circuit with two RC loops connected in parallel is often used for fitting the EIS diagram…
Size effects in micro- and nanoscale indentation
2006
Abstract The indentation size effect (ISE) has been studied in single crystals, polycrystals and amorphous solids using the Vickers microhardness test. The ISE is clearly present in single crystals but is absent in fine-grained polycrystals. A size-dependent hardness for amorphous solids is observed only in the sub-micrometre surface layer. The behaviour of the ISE in single crystals for micro- and nanoindentation is compared. Estimates of the surface hardness are made by the extrapolation of the experimental hardness–indentation depth curves. The extrapolated hardness in the surface region reaches values corresponding to the theoretical shear strength. The results confirm the multifarious …
Surface reconstruction of the lamellar morphology in a symmetric poly(styrene-block-butadiene-block-methyl methacrylate) triblock copolymer: A tappin…
1996
The surface morphology of a symmetric poly(styrene-block-butadiene-block-methyl methacrylate) triblock copolymer (PS-b-PB-b-PMMA) with 6 wt % PB has been investigated by tapping mode scanning force microscopy (SFM). The results are compared to the bulk morphology as determined by transmission electron microscopy (TEM). In solvent-cast films PS/PMMA lamellae are formed, which are oriented nearly perpendicular to the free surface. Like in the bulk, also at the free film surface polybutadiene spheres are located at the lamellar PS/PMMA interface. However, contrary to the bulk, the surface morphology includes a large number of defects such as curved lamellar and disclinations, and the lamellar …
Preliminary study on the laser cleaning of stainless steels after high temperature oxidation
2000
Abstract The objective of the present work was to estimate the influence of pulsed laser irradiation on the removal of the oxide layer, which is developed on the surface of stainless steels during their exposure to high temperature oxidation. In general, this layer is a protective one, mainly against corrosion. However, in many manufacturing applications or maintenance work, the removal of the oxides is necessary; for example, the metallic surfaces should be cleaned before welding, otherwise the presence of oxides increases the tendency to brittle behaviour of the joint. In this study, a pulsed Nd:YAG laser (λ=1.064 μm, 10 ns) was used for the surface cleaning of three stainless steels with…