Search results for "swelling"
showing 10 items of 192 documents
Investigation of the swelling behavior of cationic exchange resins saturated with Na+ ions in a C3S paste
2015
Ion exchange resins (IERs) are widely used by the nuclear industry to decontaminate radioactive effluents. Spent products are usually encapsulated in cementitious materials. However, the solidified waste form can exhibit strong expansion, possibly leading to cracking, if the appropriate binder is not used. In this work, the interactions between cationic resins in the Na+ form and tricalcium silicate are investigated during the early stages of hydration in order to gain a better understanding of the expansion process. It is shown that the IERs exhibit a transient swelling of small magnitude due to the decrease in the osmotic pressure of the external solution. This expansion, which occurs jus…
Comparative evaluation of the swelling and degrees of cross-linking in three organic gel packings for SEC through some geometric parameters.
2003
Abstract The size exclusion chromatographic (SEC) behavior of five solvent/polymer systems in three organic column packings based on polystyrene/divinylbenzene (PS/DVB) copolymer, TSK-Gel H HR , μ-styragel and TSK-Gel H XL , has been compared. All the packings offer similar characteristics (pore size, particle size and efficiency) but some differences have been found when eluting the same systems. The different elution behavior observed in both polymeric gels has been analyzed in terms of their swelling and cross-linking degrees and of the fractal parameters. From the Universal Calibration plots, values of the chromatographic partition coefficient, K p , have been obtained and using some eq…
Chemical hydrogels based on a hyaluronic acid-graft-α-elastin derivative as potential scaffolds for tissue engineering
2013
In this work hyaluronic acid (HA) functionalized with ethylenediamine (EDA) has been employed to graft α-elastin. In particular a HA-EDA derivative bearing 50 mol% of pendant amino groups has been successfully employed to produce the copolymer HA-EDA-g-α-elastin containing 32% w/w of protein. After grafting with α-elastin, remaining free amino groups reacted with ethylene glycol diglycidyl ether (EGDGE) for producing chemical hydrogels, proposed as scaffolds for tissue engineering. Swelling degree, resistance to chemical and enzymatic hydrolysis, as well as preliminary biological properties of HA-EDA-g-α-elastin/EGDGE scaffold have been evaluated and compared with a HA-EDA/EGDGE scaffold. T…
Fracture Toughness of Hydrothermally Aged Epoxy Systems with Different Crosslink Density
2015
Abstract The present work investigates the fracture toughness behaviour of Single Edge Notched Bending (SENB) samples of epoxy systems subject to water uptake aging. Two epoxy systems with a significantly different Glass Transition Temperature, T g , are in particular considered: a typical commercial non-aeronautical grade resin matrix for composite applications, reaching a T g of 90 °C, and a DGEBA+DDS epoxy system achieving a T g of 230 °C.The materials have been conditioned by hydrothermal aging in a thermal bath at the temperature of 50 °C. TransmissionPhotoelastic Stress Analysisis carried outon SENB samples during water aging, monitoring the presence and evolution of swelling stresses…
Processing-structure-property relationships of electrospun PLA-PEO membranes reinforced with enzymatic cellulose nanofibers
2020
Abstract Three different solvent mixtures were used to prepare electrospun membranes based on polylactic acid (PLA), polyethylene oxide (PEO) and enzymatic cellulose nanofibers (CNF). The materials were characterized from a morphological, spectroscopic, mechanical and rheological point of view. Furthermore, swelling test were performed in order to assess the water uptake of each sample. The results put into evidence that the choice of the solvents affects the structure and the properties of the membranes. Among the protocols tested, using chloroform/acetone/ethanol mixture was found to allow a high degree of CNF dispersion and a good electrospinnability of polymer solutions. These features …
E-beam irradiation and UV photocrosslinking of microemulsion-laden poly(N-vinyl-2-pyrrolidone) hydrogels for ‘‘in situ’’ encapsulation of volatile hy…
2011
Gelled microemulsions are the subject of considerable scientific and commercial interest. Many efforts are currently devoted to improving their toxicological profile and functioning as biocompatible diffusion barrier for the controlled delivery of hydrophobic compounds. In the present investigation, a non-ionic polymeric surfactant was chosen to generate an oil-in-water microemulsion of a model fragrance in the presence of poly(N-vinyl-2-pyrrolidone) (PVP). The microemulsion was then subjected to either electron-beam or UV-irradiation to induce free-radical crosslinking of PVP at low temperature and in the absence of crosslinking agents, catalysts and initiators. Irradiation conditions with…
Hydrogel films engineered in a mesoscopically ordered structure and responsive to ethanol vapors
2014
Abstract Responsive hydrogels filling the interstitial spaces of photonic crystals can form mesoscopically structured materials, which exhibit reversible shifts in the Bragg diffracted light as a response of environmental changes. These materials can be used to generate chemical or biochemical sensors. The present work reports on the synthesis and characterization of ethanol responsive hydrogels that can be used in the design of novel breathalyzers. The dynamic mechanical behavior of the macroscopic hydrogels and their swelling features in the presence of different liquids or vapors have been investigated to orientate the choice of the best responsive material and curing process. The swelli…
Hydrophilic membranes based on poly(vinyl methyl ether-crosslinked-polystyrene) semi-interpenetrating networks
1991
Microporous membranes were prepared from poly(vinyl methyl ether - crosslinked-polystyrene) (PVME-cross-PS) semi-IPN's by extraction of poly(vinyl methyl ether) (PVME) with water. Membrane morphology and properties are fixed during the process of swelling, phase separation, PVME extraction and vitrification which occurs upon immersing the samples in water. The membranes are characterized by swelling (water uptake), the relative amounts of free and bound water, and their permselectivity towards KCI solution.
Energy Consumption for the Desalination of Salt Water Using Polyelectrolyte Hydrogels as the Separation Agent
2017
The energy consumption for a novel desalination approach using charged hydrogels under externally applied pressure is experimentally measured and calculated. The salt separation is based on a partial rejection of mobile salt ions caused by the fixed charges inside the polyelectrolyte network. Self-synthesized and commercial poly(acrylic acid) hydrogels are used to study the desalination performance in reference to sodium chloride solutions within the concentration range of 0.1–35 g L−1. The influence of various synthetic parameters, such as the degree of crosslinking (DC) and the size and shape of the particles, is investigated. Furthermore, the effect of process parameters including the am…
Characterization of a Superabsorbent Polymer.
2007
We studied an amorphous polymer superabsorbent, able to absorb until 1000 times its weight of water. It is consisted of macromolecular chains, dependent between them by chemical bonds. The swelling of the product in the presence of water gives rise to a polyelectrolytic gel. The chemical analysis of polymer by energy dispersive spectrometry and photoelectrons spectroscopy with a microsounder X showed that the product is homogeneous. It contains carbon, oxygen, and sodium. The measurements of specific surface of the product show that the polymer is nonporous and present a weak surface of about 2.1 m2/g. The thermal study of polymer showed that, under the effect of the temperature and with at…